A Utility for Nanopore Current Alignment to Large Expanses of DNA
A streaming algorithm for mapping raw nanopore signal to DNA references
Enables real-time enrichment or depletion on Oxford Nanopore Technologies (ONT) MinION runs via ReadUntil
Also supports standalone signal mapping of fast5 reads
Read the preprint on BioRxiv
> git clone --recursive https://github.com/skovaka/UNCALLED.git
> cd UNCALLED
> python setup.py install
UNCALLED for ReadUntil sequenecing requires the ONT ReadUntil API, which is provided as a submodule but must be installed separately into the MinKNOW environment. UNCALLED must also be installed into the MinKNOW environment alongside the ReadUntil API for ReadUntil sequencing (see Real-Time ReadUntil below).
Most dependecies included via submodules, so be sure to clone with git --recursive
UNCALLED must be installed into a python environment. To install without root privileges use the --user or --prefix=<local-dir> flag when installing, or use a tool such as virtualenv or anaconda.
Requires python-dev, numpy, and GCC >= 4.8.1
HDF5 must be installed. Libraries and headers should be in system paths (ie $LD_LIBRARY_PATH and $CPATH respectively), or specified by running python setup.py build_ext --library-dirs <hdf5-location>/lib --include-dirs <hdf5-location>/include prior to installation.
We recommend running on a Linux machine. UNCALLED has been successfully installed and run on Mac computers, but real-time ReadUntil has not been tested on a Mac. Installing UNCALLED has not been attempted on Windows.
Example:
> bwa index -p E.coli E.coli.fasta
> uncalled index -i E.coli.fasta -x E.coli
UNCALLED requires a BWA index. You can use a previously built BWA index, or build a new one with the BWA instance provided in the bwa/ submodule.
Before aligning, certain reference-specific parameters must be computed using uncalled index. The <fasta-reference> should be the same FASTA file which was used to build the BWA index. This will create an additional file in the same directory as the BWA index named <bwa-prefix>.uncl.
Example:
> uncalled map -t 16 -x E.coli -i fast5_list.txt > uncalled_out.paf
Loading fast5s
Mapping
> head -n 4 uncalled_out.paf
b84a48f0-9e86-47ef-9d20-38a0bded478e 3735 77 328 + Escherichia_coli_chromosome 4765434 2024611 2024838 66 228 255 ch:i:427 st:i:50085 mt:f:53.662560
77fe7f8c-32d6-4789-9d62-41ff482cf890 5500 94 130 + Escherichia_coli_chromosome 4765434 2333754 2333792 38 39 255 ch:i:131 st:i:238518 mt:f:19.497091
eee4b762-25dd-4d4a-8a59-be47065029be 2905 * * * * * * * * * 255 ch:i:44 st:i:302369 mt:f:542.985229
e175c87b-a426-4a3f-8dc1-8e7ab5fdd30d 8052 84 154 + Escherichia_coli_chromosome 4765434 1064550 1064614 41 65 255 ch:i:182 st:i:452368 mt:f:38.611683
Arguments:
-x/--bwa-prefixthe prefix of the index to align to. Should be a BWA index thatuncalled indexwas run on-i/--fast5-filesa text file containing the path to one fast5 file per line-t/--threadsnumber of threads to use for mapping (default: 1)-n/--read-countmaximum number of reads to map-f/--filtertext file containing subset of read IDs (one per line) to map from the fast5 files (will map all by default)-e/--max-events-procnumber of events to attempt mapping before giving up on a read (default 30,000). Note that there are approximately two events per nucleotide on average.
See example/ for a simple read and reference example.
Example:
> uncalled list-ports
MN02686 (2019-11-18 12:30:56): 8000
> /opt/ont/minknow/ont-python/bin/uncalled realtime --port 8000 -t 16 -x E.coli --enrich -c 3 --post-script basecall.sh > uncalled_out.paf
Starting client
Starting mappers
Mapping
Running post-script: 'basecall.sh'
> head -n 4 uncalled_out.paf
81ba344d-60df-4688-b37f-9064e76a3eb8 1352 * * * * * * * * * 255 ch:i:68 st:i:29101 mt:f:375.93841 wt:f:1440.934 mx:f:0.152565
404113c1-6ace-4690-885c-9c4a47da6476 450 * * * * * * * * * 255 ch:i:106 st:i:29268 mt:f:63.272270 wt:f:1591.070 en:f:0.010086
d9acafe3-23dd-4a0f-83db-efe299ee59a4 1355 * * * * * * * * * 255 ch:i:118 st:i:29378 mt:f:239.50201 wt:f:1403.641 ej:f:0.120715
8a6ec472-a289-4c50-9a75-589d7c21ef99 451 98 369 + Escherichia_coli 4765434 3421845 3422097 56 253 255 ch:i:490 st:i:29456 mt:f:79.419411 wt:f:8.551202 kp:f:0.097424
You must install UNCALLED into the MinKNOW enrironment. If HDF5 is not installed in the root filesystem, you may have to specify the library and include directory by running setup.py build_ext prior to installation:
sudo /opt/ont/minknow/ont-python/bin/python setup.py build_ext --library-dirs /path/to/hdf5/lib --include-dirs /path/to/hdf5/include
sudo /opt/ont/minknow/ont-python/bin/python setup.py install
The above commands assume your MinKNOW python environment is located at /opt/ont/minknow/ont-python.
We recommend that you try mapping fast5s with the MinKNOW installation via uncalled map before real-time enrichment, as runtime issues involving hdf5 libraries could come up if UNCALLED is not installed properly.
The command can be run at any time before or during a sequencing run, although if you want to chagne the chunk size you must run the commend before startin the run (see below). Reads will not be ejected until after the first mux scan finishes.
Arguments:
-x/--bwa-prefixthe prefix of the index to align to. Should be a BWA index thatuncalled indexwas run on-t/--threadsnumber of threads to use for mapping (default: 1)-c/--max-chunks-procnumber of chunks to attempt mapping before giving up on a read (default: 10).--chunk-sizesize of chunks in seconds (default: 1). Note: this is a new feature and may not work as intended (see below)--portMinION device port. Useuncalled list-portscommand to see all devices that have been plugged in since MinKNOW started.--enrichwill keep reads that map to the reference if included--depletewill eject reads that map to the reference if included--evenwill only eject reads from even channels if included--oddwill only eject reads from odd channels if included--durationexpected duration of sequencing run in hours (default: 48)--post-scriptoptional path to executable to run after analysis has finished. Useful to automatically basecall after sequencing is done, for example.--post-timebuffer time to wait after the last read before running the post-script, in seconds (default: 60). Useful because MinKNOW's sequencing time is not always exact.
Note exactly one of --deplete or --enrich must be specified
The ReadUntil API recieves signal is "chunks", which by default are one second's worth of signal. This can be changed using the --chunk-size parameter. Note that --max-chunks-proc should also be changed to compensate for changes to chunks size. If the chunk size is changed, you must start running UNCALLED before sequencing begins. UNCALLED is unable change the chunk size mid-seqencing-run. In general reducing the chunk size should improve enrichment, although previous work has found that the API becomes unreliable with chunks sizes less than 0.4 seconds. We have not thoroughly tested this feature, and recommend using the default 1 second chunk size for most cases. In the future this default size may be reduced.
Both uncalled map and uncalled realtime output to stdout in a format similar to PAF. Unmapped reads are output with reference-location-dependent fields replaced with *s. Lines that begin with "#" are comments that useful for debugging.
Query coordinates, residue matches, and block lengths are estimated assuming 450bp sequenced per second. This estimate can be significantly off depending on the sequencing run. UNCALLED attempts to map a read as early as possible, so the "query end" field corresponds to the leftmost position where UNCALLED was able to confidently map the read. In many cases this may only be 450bp or 900bp into the read, even if the read is many times longer than this. This differs from aligners such as minimap2, which attempt to map the full length of the read.
For real-time mapping, read lengths are estimated by how much signal UNCALLED received, which does not necessarily correspond to how much signal was actually sequenced.
Both modes include the following custom attributes in each PAF entry:
mt: map time. Time in milliseconds it took to map the read.ch: channel. MinION channel that the read came from.st: start sample. Global sequencing start time of the read (in signal samples, 4000 samples/sec).
uncalled realtime also includes the following attributes:
ej: ejected. Time that the eject signal was sent, in milliseconds since last chunk was received.kp: kept. Time that UNCALLED decided to keep the read, in milliseconds since last chunk was received.en: ended. Time that UNCALLED determined the read ended, in milliseconds since last chunk was received.mx: mux scan. Time that the read would have been ejected, had it not have occured within a mux scan.wt: wait time. Time in milliseconds that the read was queued but was not actively being mapped, either due to thread delays or waiting for new chunks.
We have included a functionality called uncalled pafstats which computes speed statistcs from a PAF file output by UNCALLED. Accuracy statistics can also be included if provided a ground truth PAF file, for example based on minimap2 alignments of basecalled reads. There is also an option to output the original UNCALLED PAF annotated with comparisions to the ground truth.
Example:
> uncalled pafstats -r minimap2_alns.paf -n 5000 -a uncalled_out.paf > uncalled_ann.paf
Summary: 5000 reads, 4373 mapped (89.46%)
Comparing to reference PAF
P N
T 88.74 6.80
F 0.60 3.74
NA: 0.12
Speed Mean Median
BP per sec: 4878.24 4540.50
BP mapped: 636.29 362.00
MS to map: 140.99 89.96
Accuracy statistics:
- TP: true positive - percent infile reads that overlap reference read locations
- FP: false positive - percent infile reads that do not overlap reference read locations
- TN: true negative - percent of reads which were not aligned in reference or infile
- FN: false negative - percent of reads which were aligned in the reference but not in the infile
- NA: not aligned/not applicable - percent of reads aligned in infile but not in reference. Could be considered a false positive, but the truth is unkown.
For ReadUntil sequencing, the first decision to make is whether to perform enrichment or depletion (--enrich or --deplete).
In enrichment mode, UNCALLED will eject a read if it does not map to the reference, meaning your target should be the reference.
In depletion mode, UNCALLED will eject a read if it does map to the reference, meaning your target should be everything except your reference.
Note that enrichment necessitates a quick decision as to whether or not a read maps, since you want to eject a read as fast as possible. Usually ~95% of reads can be mapped within three seconds for highly non-repetitive references, so setting -c/--max-chunks-proc to 3 generally works well for enrichment. The default value of 10 works well for depletion. Note these values assume --chunk-size is set to the default 1 second.
UNCALLED currently does not support large (> ~100Mb) or highly repetitive references. The speed and mapping rate both progressively drop as references become larger and more repetitive. Bacterial genomes or small collections of divergent bacterial genomes typically work well. Small segments of eukaryotic genomes can also be used, however the presence of any repetitvie elements will harm the performance. Collections of highly similar genomes wil not work well, as conserved sequences introduce repeats. See masking for repeat masking scripts and guidlines.
ReadUntil works best with longer reads. Maximize your read lengths for best results. You may also need to perform a nuclease flush and reloading to achive the highest yield of on-target bases.
UNCALLED currently only supports reads sequenced with r9.4 chemistry.
UNCALLED is a work in progress. Many parameters exist that are not documented here, but can be seen on the command line help information. Most users should leave these unchanged. They may be removed in future versions, or be replaced with hyperparameters that adjust the accuracy and speed of UNCALLED.