common.xml: add extensions to MANUAL_CONTROL

message_definitions/v1.0/common.xml

@@ -4627,6 +4627,17 @@
       <field type="int16_t" name="z">Z-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to a separate slider movement with maximum being 1000 and minimum being -1000 on a joystick and the thrust of a vehicle. Positive values are positive thrust, negative values are negative thrust.</field>
       <field type="int16_t" name="r">R-axis, normalized to the range [-1000,1000]. A value of INT16_MAX indicates that this axis is invalid. Generally corresponds to a twisting of the joystick, with counter-clockwise being 1000 and clockwise being -1000, and the yaw of a vehicle.</field>
       <field type="uint16_t" name="buttons">A bitfield corresponding to the joystick buttons' current state, 1 for pressed, 0 for released. The lowest bit corresponds to Button 1.</field>
+      <extensions/>
+      <field type="uint16_t" name="buttons2">A bitfield corresponding to the joystick buttons' 16-31 current state, 1 for pressed, 0 for released. The lowest bit corresponds to Button 16.</field>
+      <field type="uint8_t" name="enabled_extensions">Set bits to 1 to indicate which of the following extension fields contain valid data: bit 0: pitch, bit 1: roll, bit 2: aux1, bit 3: aux2, bit 4: aux3, bit 5: aux4, bit 6: aux5, bit 7: aux6</field>
+      <field type="int16_t" name="s">Pitch-only-axis, normalized to the range [-1000,1000]. Generally corresponds to pitch on vehicles with additional degrees of freedom. Valid if bit 0 of enabled_extensions field is set. Set to 0 if invalid.</field>
+      <field type="int16_t" name="t">Roll-only-axis, normalized to the range [-1000,1000]. Generally corresponds to roll on vehicles with additional degrees of freedom. Valid if bit 1 of enabled_extensions field is set. Set to 0 if invalid.</field>
+      <field type="int16_t" name="aux1">Aux continuous input field 1. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 2 of enabled_extensions field is set. 0 if bit 2 is unset.</field>
+      <field type="int16_t" name="aux2">Aux continuous input field 2. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 3 of enabled_extensions field is set. 0 if bit 3 is unset.</field>
+      <field type="int16_t" name="aux3">Aux continuous input field 3. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 4 of enabled_extensions field is set. 0 if bit 4 is unset.</field>
+      <field type="int16_t" name="aux4">Aux continuous input field 4. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 5 of enabled_extensions field is set. 0 if bit 5 is unset.</field>
+      <field type="int16_t" name="aux5">Aux continuous input field 5. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 6 of enabled_extensions field is set. 0 if bit 6 is unset.</field>
+      <field type="int16_t" name="aux6">Aux continuous input field 6. Normalized in the range [-1000,1000]. Purpose defined by recipient. Valid data if bit 7 of enabled_extensions field is set. 0 if bit 7 is unset.</field>
     </message>
     <message id="70" name="RC_CHANNELS_OVERRIDE">
       <description>The RAW values of the RC channels sent to the MAV to override info received from the RC radio. The standard PPM modulation is as follows: 1000 microseconds: 0%, 2000 microseconds: 100%. Individual receivers/transmitters might violate this specification.  Note carefully the semantic differences between the first 8 channels and the subsequent channels</description>