EIO-IS200 Linux Kernel Driver

This is a series of device drivers for Advantech EIO-IS200 embedded controller as follow:

  MFD core: eiois200_core
  GPIO: gpio-eiois200
  Hardware monitor: eiois200-hwmon
  Fan: eiois200_fan
  Thermal: eiois200_thermal
  I2C: i2c-eiois200
  Video backlight: eiois200_bl
  Watchdog: eiois200_wdt

License

See LICENSE for details.

Contributing

See CONTRIBUTING.md for details.

OS supported

These drivers have been verified on:

   Ubuntu 20.04 and 22.04 with Linux kernel versions 5.15, 5.19, and 6.2.

Get the source first.

Get it from Github repository with the following command in the Linux terminal.

  git clone [email protected]:ADVANTECH-Corpcd/eio-is200-linux-kernel-driver.git
  cd eio-is200-linux-kernel-driver

Install

Run the following commands in the Linux terminal.

  make                 # Build *.ko files
  sudo make install    # Install driver module
  sudo make load       # Load module

Uninstall

To uninstall the EIOIS200 driver, use the following "make" commands:

  sudo make unload     # Unload module
  sudo make uninstall  # Uninstall driver module
  make clean           # Clean *.ko files

Example

We have prepared an example to demonstrate how to use the EIOIS200 driver. Simply type "./example.sh" to execute it.

root# sudo ./example.sh

DKMS packaging for debian and derivatives

DKMS is commonly used on debian and derivatives, like ubuntu, to streamline building extra kernel modules. If you need to package the source code into an installation package, please follow the instructions below. Please note that these instructions are based on version 0.0.2 of the source code. Before executing the commands, make sure to adjust the version number '0.0.2' according to the version you are currently using:

  sudo cp eiois200-0.0.2/ /usr/src/ -r
  sudo dkms add eiois200/0.0.2
  sudo dkms build eiois200/0.0.2
  sudo dkms mkdeb eiois200/0.0.2

After all, the installation package should be placed in /var/lib/dkms/eiois200/0.0.2/dev/ To verify this installation package, please follow the instructions below to test:

  cp /var/lib/dkms/eiois200/0.0.2/deb/eiois200-dkms_0.0.2_amd64.deb .
  sudo dpkg -i eiois200-dkms_0.0.2_amd64.deb

To test whether the installation is successful, you can test loading one of the modules, for example:

  sudo modprobe eiois200-hwmon
  lsmod | grep eio

If correct, the reply should be as follows:

  eiois200_hwmon         40960  0
  eiois200_core          28672  1 eiois200_hwmon

To uninstall the installation package, please follow the steps below:

  sudo dpkg -P eiois200-dkms

To confirm that the package works properly, please use the following command:

  sudo bash /usr/src/eiois200-0.0.2/example.sh

The shell script will start. You may use this sample to test each device driver:

**********************************************
**            EIOIS200 Example              **
**********************************************

Main (EIOIS200 driver demo script)

0) Terminate this program
1) Watch Dog
2) HWM
3) SmartFan
4) Thermal Protection
5) GPIO
6) Backlight
7) SMBus
8) I2C
9) Information

Enter your choice: 

Reference

GPIO sysfs: https://www.kernel.org/doc/Documentation/gpio/sysfs.txt

hwmon sysfs: https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface

Thermal & Fan sysfs: https://www.kernel.org/doc/Documentation/thermal/sysfs-api.txt

I2C sysfs: https://www.kernel.org/doc/Documentation/i2c/i2c-sysfs.rst

Watchdog api: https://www.kernel.org/doc/Documentation/watchdog/watchdog-api.txt