Issue: cannot use sooperlooper selected loop to select loop 1

[Baggypants]

Describe the issue

A clear and concise description of what the issue is.

To Reproduce

Steps to reproduce the behavior:

1. Add sooperlooper
2. Add three more loops
3. Navigate to Global Loop
4. Use selected loop knob

Expected behaviour

The loop selection should move between loops 1-4

Actual behaviour

The selected loop goes between loops 2-4

Screenshots

If applicable, add screenshots to help explain your problem.

Additional context

Add any other context about the problem here.

Configuration

Hardware

Raspberry Pi 4 Model B Rev 1.1
Audio: HifiBerry DAC+
Display: PiScreen 3.5 (v2)
Wiring: MCP23017_ENCODERS
I2C: MCP23017@0x20
Profile: 

System

Debian GNU/Linux 12 (bookworm)
Build Date: 2024-10-02
Memory: 83% (758M/907M)
SD Card: 20% (22G/117G)
Temperature: 60.8ºC
Overclock: None

MIDI & UI

Tuning: 440 Hz
Master Channel: Off
Preload Presets: On
ZS3 (SubSnapShots): On
Power Save: 60 minutes
Audio Levels on Snapshots: On

Software

zyncoder: oram (71de6d2) 
zynthian-ui: oram (f43f293)
zynthian-sys: oram (105c12d)
zynthian-data: oram (ddfa009)
zynthian-webconf: oram (b530397)