Issue:The 'bypass' switch is not triggered by a CC controler value of 0 or 127. Any value between 1 and 126 is ok for triggering.

[maarthome]

Describe the issue

The latch bypass switch is not triggered by a CC controller binary value change from 127 to 0 (which I used in the past on the Zynthian). In fact I now use only the value 100 to toggle between on and off (Latched mode)
I guess a matter of > or >= and < or <=?

( found noticed that only values above 64 have any effect on the latched switch mode.)

Cheers,
maarten

Configuration

Hardware

Raspberry Pi 5 Model B Rev 1.0
Audio: Generic USB device
Display: Generic HDMI/DSI Display
Wiring: DUMMIES
I2C: Not detected
Profile: 

System

Debian GNU/Linux 12 (bookworm)
Build Date: 2024-10-02
Memory: 25% (1037M/4045M)
SD Card: 13% (14G/115G)
Temperature: 48.3ºC
Overclock: Medium

MIDI & UI

Tuning: 440 Hz
Master Channel: Off
Preload Presets: On
ZS3 (SubSnapShots): On
Power Save: 10 minutes
Audio Levels on Snapshots: On

Software

zyncoder: oram (66fa477) 
zynthian-ui: oram (7b68279)
zynthian-sys: oram (105c12d)
zynthian-data: oram (305b301)
zynthian-webconf: oram (31f3f55)