Release 1.20

[webspiderteam]

• Fixed Resize window when chart off
• Changed TrayIcon menu
• Performance improvement (while not connected Cpu Usege was about 6-9%)
• Improve Popup Windows Move action stability
• Reduce Cpu usage while waiting for Connection window response
• Fixed DataChart not shown when activated from Settings

---

This discussion was created from the release Release 1.20.

[ludwich66]

Did you change Difference Color between Active an background Window more?
It is very good with this shadow view.
+++
L

[webspiderteam]

No i didnt changed the color just added blur effect to in active window

[webspiderteam]

what happened? I saw that you say there were a issue

[ludwich66]

i had problems to start App, the startet, minimized an closed.
I found the AppDate Webspider Folder and killed it. Now it works.
Did you activated Raw-Data and Minimize by default?
L

[webspiderteam]

both of them default enabled until I added them not changed default values

[webspiderteam]

i had problems to start App, the startet, minimized an closed.

Probably file corrupted for some reason.

[ludwich66]

MQTT Secure with Password (not Tested with Certificate) works.
This was a hard birth, Mosquito changed secure settings from last Installation to actual.
Test from MQTT works on localhost, but first after changing configfile you can use it from other PC in the Net.
learning by curse ;-(
L

[webspiderteam]

Certificate? Is there a certificate and for what?

[ludwich66]

you can use TLS transport and bind it on a CA.
But i dont know - i use it only local not for external locations in WAN.

https://mosquitto.org/man/mosquitto-tls-7.html

[ludwich66]

Stability Issue,

Hi Engin,
i made with 1.20 two longtime tests. measurement was two times canceled (over night).
App was closed, started then without problems.
PC and Broker are Running without deep sleep etc.

I measured temperature but only wrote changes to file. So I can not say how many measured values were generated before the termination.

Any ideas how we can narrow this down?

• Maximum number of readings reached?

Have a nice Day!
Ludwich

[webspiderteam]

• Maximum number of readings reached?

Not posible teorically its 1M seconds. also I did measuremente about 10 hours without problem. there shoul be unexpectable data and it has to write to log if there is. Also bluetooth adapter can be issue sometimes bluetooth losts connecttion and even resets it selfs. I didnt tested bluetooth adapter issues.

[webspiderteam]

I tried to simulate Bluetooth and Mqtt server loss but no issue. but I couldnt try bluetooth compeletely because mine is integrated and cant pull it out just disabled. Maybe you can try

[ludwich66]

How do i write a debug log - is there an Option?
L

[webspiderteam]

No option for it ı can only see them in visual studio there is no option for terminated so it can't write actual problem. Did you found when it's crashing

[ludwich66]

It runs, i save MQTT Datepackages now complete, collect 300 Messages and save it on block. lets Look ;-) L

…

Am 24.08.2022 um 17:37 schrieb webspiderteam ***@***.***>: No option for it ı can only see them in visual studio — Reply to this email directly, view it on GitHub <#25 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5DF3IGWDVAN4A4GHERV6LV2Y6T7ANCNFSM57DOPEHQ>. You are receiving this because you commented.

[ludwich66]

10,9 GB from 16 Available
with restart BT-DMM used 0,1 % CPU and 26,6 MB RAM; LAN 0,1 MBit/s

On this machine is only BT-DDM runing
Brocker is another SBC and
MQTT with Staroage is a Third SBC.

I look in the evening again and look of an increasuing usage.

L

[webspiderteam]

Pagefile?

[ludwich66]

What did you mean with Pagefile.sys?
At the Moment 2,4 GB other than that I can't say.
L

[webspiderteam]

Too low for 16gb ram if it is 2.4gb. pagefile can cause crashes. I have 8gb ram and my page file is now 13.7 gb. İf you changed it manually or if windows installed before ram upgrade this can cause that side effect

[webspiderteam]

Typically it should be between half of ram size and twice of ram size in your condition it should be 8096-32392

[ludwich66]

good way how do i change pagefile - i meen size is automatic increase or decrease ? L

…

Am 25.08.2022 um 21:02 schrieb webspiderteam ***@***.***>: Too low for 16gb ram if it is 2.4gb. pagefile can cause crashes. I have 8gb ram and my page file is now 13.7 gb. İf you changed it manually or if windows installed before ram upgrade this can cause that side effect — Reply to this email directly, view it on GitHub <#25 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AC5DF3K3VX7KCZYCN4WL4SDV267N7ANCNFSM57DOPEHQ>. You are receiving this because you commented.

[webspiderteam]

Right click to my computer. Enter properties
İn there at right side there should be advanced system settings. İn there at advanced tab you will see performance settings. İn performance settings advanced tab you will see virtual memory. Click change. Can you take a screenshot of it

[webspiderteam]

thats my setting rightnow
if you have more than 30gb free space you can set like

then press "Set" before OK

[webspiderteam]

Portable.zip
also use this. added log for crashes

[ludwich66]

Engin Thanks,

good manuel. I changed it and try another longtime maesurement.
i change Programm version after the next chrash - i hope it runs now without problems.

Cu tomorrow !!

L

+++

[ludwich66]

Good morning Engin,

Tomorrow the same App shutdown, (with 1.20 original).
Errors in Log are the same as before.

Now i changed to your debugversion.
Start up with:

and after short time another window, this shut down App.

L

[webspiderteam]

can you send me crash log

[webspiderteam]

under app dir

[ludwich66]

Sorry, here a sample of all Crashlogfiles from today

crashlog_26-08-2022_10_35_27.zip

L

[webspiderteam]

All errors are depend on mqtt library. it loses connection and then gives error. is your server localhost? or remote device?
anyway I should change mqtt library. but most of them has bigger files.

[ludwich66]

Engin, here my topology

ANENG V05B -> BluetoothLE
(MQTT Client) Windows 10 PC (MQTT Client) BT-DMM 1.20
(MQTT BROKER) OrangepiZeroPlus LINUX 5.15 , MOSQUITTO V. 2.0.11 (OPi with 512 MB RAM / 8GB eMMC only this Mainjob)
(MQTT Client) NodeRed on a ODROID 4GB RAM

L

[webspiderteam]

Posibly there is connection loss sometimes an mqtt client cant handle it right way

[ludwich66]

Engin,
short Question:
Why does your debug version find problems with start up?
The App does run over 24 Hours without crashes or data loss?

[webspiderteam]

there is no error in my pc.. also all errors are depend on mqtt wifi connections are not so stable and SoC are also much more unstable wifi

[webspiderteam]

Can you try this
Portable.zip

[webspiderteam]

I need to know if issue fixed but no hurry for it

[ludwich66]

time will tell
it runs, i went to FamilyTV evening now
will be back at 22:00

[webspiderteam]

relax Ludwich let it run I can wait.

[ludwich66]

Morning Engin,

Good News its run-in and running...

47734 Measurements
62 Messages false, with losses and double received values

Its around 1/1000 Promile - it's Ok. (for me)

Doubles or Transmition-errors:

Did your new MQTT Client handle QOS Levels?
I used completely QOS 0

QOS 0 Minimal traffic

QOS 1 Double Traffic

QOS 2 Quadruple Traffic

And this pro Clientside

I have no experience of the high level "burden". But we can test that.

Q: https://www.youtube.com/watch?v=QhecPNkWBQ0
EDI's Techlab A very compact clip about MQTT with all relevant Infos
Its in German(Austria) but you can choose undertitle.

L

[webspiderteam]

62 Messages false, with losses and double received values

you mean loose probes connection? if displays goes auto or no value shown double value error can happen. I cant do anything for it. BTW are there error window while these errors or just seen on the log? if it gives errors with error window I have to remove the window.
if there is debub log can you send me?

Did your new MQTT Client handle QOS Levels?

I dont know but trobably. both clients can get and send datas. and this one is most known Library for Mqtt

[ludwich66]

I mean Datapackages from Source to Sink (CLIENT:V05B/BTDMM -> BROKER -> NodeRed:CLIENT)

Did you use this MQTT LiB?
https://github.com/dotnet/MQTTnet

there is this comment:
Also included ManagedMqttClient which maintains the connection and subscriptions automatically. Also application messages are queued and re-scheduled for higher QoS levels automatically.

I must start another Testrow later -- Battery Low Indicator works ;-)
It works for 3 Days with 900 mAh NiMh cells. V05B uses smaller batteries then AN9002
Its al lot of Time for continuous run.

I have Bat-Low not in my NodeRed Sample implemented now. if time ...

L

[webspiderteam]

Did you use this MQTT LiB?
https://github.com/dotnet/MQTTnet

yes thats it.

It works for 3 Days with 900 mAh NiMh cells.

its short for me. I didnt changed my batteries until I buy it. Is about 2 years. Thats why I chose this long battery life more accurated than my old. an it was using 9v batteries and I had to change every mount. also I was forgetting to shut it of. 9v batteries not good also. and also bluetooth ability of course.

[webspiderteam]

If its ok I'm releasing this.

[ludwich66]

Looks good!

• No App Crashes.
• 135.600 readings

;-) +++

L

[webspiderteam]

Almost 40 hours 😊

[ludwich66]

You are welcome (if you are bored) to install a normal counter for the MQTT string to select from.
It is then easier to find "mistransmissions".
I have to parse the time in Libre Calc first ;-)
L

[ludwich66]

I'll then switch to the official 1.21, new batteries and mega long range test ;-)

[webspiderteam]

I hope this one is last test. I think thats enough for this app.

[webspiderteam]

I also released Mqtt test app with server ability.

[ludwich66]

I am more than satisfied with the result !!