Hangs in offset calibration

[kibbeling1988]

I have to iSpindles and it doesn't complete the offset calibration. In Putty is see this:

     FW 7.2.1

2.2.2-dev(38a443e)
Worker run!
mounting FS... mounted!
ERROR: failed to load json config

ERROR config corrupted
scanning for OW device on pin: 5
No devices found!
scanning for OW device on pin: 12
Found device with ROM = 28 73 5E 1B 0 0 0 44
Chip = DS18B20
Data = 1 55 1 7F 80 7F FF B 10 5F CRC=5F
Temperature = 21.31 Celsius,
offsets not available
Boot-Mode: Deep-Sleep Wake

*WM: offset
Testing device connections...
MPU6050 connection successful

---

just a bad gyro or something else?

[ErikdBr]

just a bad gyro or something else?

Probably, there are a lot of faulty gyros in circulation.

But what comes after 'MPU6050 connection successful' in the log? Because that is your gyro.

[wilbrod]

I'd also double check all the soldering points.

…

On Mon, Mar 20, 2023, 7:51 a.m. kibbeling1988 ***@***.***> wrote: I have to iSpindles and it doesn't complete the offset calibration. In Putty is see this: FW 7.2.1 2.2.2-dev(38a443e) Worker run! mounting FS... mounted! ERROR: failed to load json config ERROR config corrupted scanning for OW device on pin: 5 No devices found! scanning for OW device on pin: 12 Found device with ROM = 28 73 5E 1B 0 0 0 44 Chip = DS18B20 Data = 1 55 1 7F 80 7F FF B 10 5F CRC=5F Temperature = 21.31 Celsius, offsets not available Boot-Mode: Deep-Sleep Wake *WM: offset Testing device connections... MPU6050 connection successful ------------------------------ just a bad gyro or something else? — Reply to this email directly, view it on GitHub <#606>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABQB5MJTAWTOO2AJ6CGR673W5BOFTANCNFSM6AAAAAAWBDXAOY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>