diff --git a/tp2bmc/board/tp2bmc/factory_overlay/upper/etc/init.d/S00nodeson b/tp2bmc/board/tp2bmc/factory_overlay/upper/etc/init.d/S00nodeson
index ea588664..df6d03d5 100755
--- a/tp2bmc/board/tp2bmc/factory_overlay/upper/etc/init.d/S00nodeson
+++ b/tp2bmc/board/tp2bmc/factory_overlay/upper/etc/init.d/S00nodeson
@@ -1,24 +1,18 @@
-#!/bin/sh
-
-# Turn on the node power as soosn as possible
-# to speed up factory testing
-
-case "$1" in
-    start|"")
-        gpioset 1 0=1
-        gpioset 1 1=1
-        gpioset 1 2=1
-        gpioset 1 3=1
-        gpioset 1 4=1
-
-        echo "enabled" > /sys/devices/platform/node1-power/state
-        echo "enabled" > /sys/devices/platform/node2-power/state
-        echo "enabled" > /sys/devices/platform/node3-power/state
-        echo "enabled" > /sys/devices/platform/node4-power/state
-        ;;
-    *)
-        echo "Usage: $0 {start}"
-        exit 1
-        ;;
-esac
-
+#!/bin/sh
+
+# Turn on the node power as soosn as possible
+# to speed up factory testing
+
+case "$1" in
+    start|"")
+        echo "enabled" > /sys/devices/platform/node1-power/state
+        echo "enabled" > /sys/devices/platform/node2-power/state
+        echo "enabled" > /sys/devices/platform/node3-power/state
+        echo "enabled" > /sys/devices/platform/node4-power/state
+        ;;
+    *)
+        echo "Usage: $0 {start}"
+        exit 1
+        ;;
+esac
+
diff --git a/tp2bmc/board/tp2bmc/factory_overlay/upper/factory/run_all_tests.sh b/tp2bmc/board/tp2bmc/factory_overlay/upper/factory/run_all_tests.sh
index 3c4e1ee7..d1204a70 100755
--- a/tp2bmc/board/tp2bmc/factory_overlay/upper/factory/run_all_tests.sh
+++ b/tp2bmc/board/tp2bmc/factory_overlay/upper/factory/run_all_tests.sh
@@ -1,433 +1,433 @@
-#!/bin/bash
-
-source helpers.sh
-
-# Define color codes
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[0;33m'
-BLUE='\033[0;34m'
-MAGENTA='\033[0;35m'
-CYAN='\033[0;36m'
-GRAY='\033[0;90m'
-NC='\033[0m' # No Color
-
-# Define the directory to search
-TEST_DIR="/factory"
-NON_EXECUTABLE_FILES=()
-EXIT_CODE=0
-
-echo -e "\n\n${RED}TURING PI FACTORY TESTING STARTED${NC}"
-
-#test_results=""
-
-print_running() {
-    local test_id="$1"
-    local test_name="$2"
-    str=$(echo -e "\n* [${test_id}] Running ${test_name}...")
-    echo "$str"
-    #test_results+="$str"$'\n'
-}
-
-print_passed() {
-    local test_id="$1"
-    local add_to=${2:-test_results}
-    str=$(echo -e "  [${test_id}] ${GREEN}PASSED${NC}")
-    echo "$str"
-    eval "$add_to+=\"\$str\"$'\n'"
-}
-
-print_failed() {
-    local test_id="$1"
-    local context="${2:-}"
-    local add_to=${3:-test_results}
-    str=$(echo -e "  [${test_id}] ${RED}FAILED${NC}    ${context}")
-    echo "$str"
-    eval "$add_to+=\"\$str\"$'\n'"
-}
-
-print_not_ran() {
-    local test_id="$1"
-    local add_to=${2:-test_results}
-    str=$(echo -e "  [${test_id}] ${GRAY}not ran${NC}")
-    echo "$str"
-    eval "$add_to+=\"\$str\"$'\n'"
-}
-
-try_run_test() {
-    local file="$1"
-    "$TEST_DIR/$file"
-    EXIT_CODE=$?
-
-    return $EXIT_CODE
-}
-
-#tpi advanced normal --node 2 >/dev/null
-#tpi power on > /dev/null
-tpi power --node 1 on >/dev/null &
-tpi power --node 2 on >/dev/null &
-tpi power --node 3 on >/dev/null &
-tpi power --node 4 on >/dev/null &
-
-test_results=""
-
-stage_1=0
-
-print_running "001" "Device Tree and EEPROM test"
-try_run_test "001-device_tree_and_eeprom_test.sh"
-exit_code=$?
-case $exit_code in
-    0)
-        print_passed "001"
-        ;;
-    1)
-        print_failed "001"
-        stage_1=1
-        ;;
-esac
-
-print_running "002" "RTC test"
-try_run_test "002-rtc-test.sh"
-exit_code=$?
-case $exit_code in
-    0)
-        print_passed "002"
-        ;;
-    1)
-        print_failed "002"
-        stage_1=1
-        ;;
-esac
-
-if [[ $stage_1 -ne 0 ]]; then
-    echo -e "\n${RED}Possibly a hardware issue on the TPi2 board${NC}"
-    exit 1
-fi
-
-stage_1_test_results="$test_results"
-test_results=""
-
-stage_2=0
-
-while true; do
-    print_running "003" "BMC Ethernet test"
-    try_run_test "003-bmc_ethernet_test.sh"
-    exit_code=$?
-    case $exit_code in
-        0)
-            print_passed "003"
-            stage_2=0
-            ;;
-        1)
-            print_failed "003" "FIX #01"
-            stage_2=1
-            ;;
-    esac
-    
-    if [ "$stage_2" -eq 0 ]; then
-        break
-    fi
-
-    if ! confirm "Try again?"; then
-        echo "Please wait, shutting down the nodes safely..."
-        bash post_test.sh
-        echo "You can disconnect power now"
-        exit 1
-    fi
-done
-
-stage_2_test_results="$test_results"
-test_results=""
-
-
-run_test_005=1
-result_test_005=""
-run_test_006=1
-result_test_006=""
-run_test_007=1
-result_test_007=""
-run_test_008=1
-result_test_008=""
-run_test_009=1
-result_test_009=""
-run_test_010=1
-result_test_010=""
-run_test_011=1
-result_test_011=""
-
-while true; do
-
-    stage_3=0
-
-    tpi power --node 1 on >/dev/null &
-    tpi power --node 2 on >/dev/null &
-    tpi power --node 3 on >/dev/null &
-    tpi power --node 4 on >/dev/null &
-
-
-    if [ "$run_test_005" -eq 1 ]; then
-        print_running "005" "Node Ethernet test"
-        try_run_test "005-node_ethernet_test.sh"
-        exit_code=$?
-
-        node1_not_ok=$((exit_code & 1))
-        node2_not_ok=$((exit_code & 2))
-        node3_not_ok=$((exit_code & 4))
-        node4_not_ok=$((exit_code & 8))
-
-        result_test_005=""
-        if [ "$node1_not_ok" -ne 0 ]; then
-            print_failed "005-1" "${YELLOW}FIX #11${NC}" result_test_005
-            stage_3=1
-        fi
-        if [ "$node2_not_ok" -ne 0 ]; then
-            print_failed "005-2" "${BLUE}FIX #12${NC}" result_test_005
-            stage_3=1
-        fi
-        if [ "$node3_not_ok" -ne 0 ]; then
-            print_failed "005-3" "${MAGENTA}FIX #13${NC}" result_test_005
-            stage_3=1
-        fi
-        if [ "$node4_not_ok" -ne 0 ]; then
-            print_failed "005-4" "${GREEN} #14${NC}" result_test_005
-            stage_3=1
-        fi
-        if [ "$node1_not_ok" -eq 0 ] && [ "$node2_not_ok" -eq 0 ] && [ "$node3_not_ok" -eq 0 ] && [ "$node4_not_ok" -eq 0 ]; then
-            print_passed "005" result_test_005
-            run_test_005=0
-        fi
-    fi
-
-    #print_running "###" "peripheral tests"
-
-    if [ "$run_test_006" -eq 1 ] && [ "$node1_not_ok" -eq 0 ]; then
-        #print_running "006" "Node1 Peripheral test"
-        out1=$(mktemp -u)
-        err1=$(mktemp -u)
-        try_run_test "006-node1_peripheral_test.sh" >"$out1" 2>"$err1" &
-        pid1=$!
-    fi
-    if [ "$run_test_007" -eq 1 ] && [ "$node2_not_ok" -eq 0 ]; then
-        #print_running "007" "Node2 Peripheral test"
-        out2=$(mktemp -u)
-        err2=$(mktemp -u)
-        try_run_test "007-node2_peripheral_test.sh" >"$out2" 2>"$err2" &
-        pid2=$!
-    fi
-    if [ "$run_test_008" -eq 1 ] && [ "$node3_not_ok" -eq 0 ]; then
-        #print_running "008" "Node3 Peripheral test"
-        out3=$(mktemp -u)
-        err3=$(mktemp -u)
-        try_run_test "008-node3_peripheral_test.sh" >"$out3" 2>"$err3" &
-        pid3=$!
-    fi
-    if [ "$run_test_009" -eq 1 ] && [ "$node4_not_ok" -eq 0 ]; then
-        #print_running "009" "Node1 Peripheral test"
-        out4=$(mktemp -u)
-        err4=$(mktemp -u)
-        try_run_test "009-node4_peripheral_test.sh" >"$out4" 2>"$err4" &
-        pid4=$!
-    fi
-
-    if [ "$run_test_006" -eq 1 ]; then
-        print_running "006" "Node1 Peripheral test"
-        result_test_006=""
-        if [ "$node1_not_ok" -eq 0 ]; then
-            wait $pid1
-            status1=$?
-            cat "$out1"
-            cat "$err1"
-            case $status1 in
-                0)
-                    print_passed "006" result_test_006
-                    run_test_006=0
-                    ;;
-                1)
-                    print_failed "006" "${YELLOW}FIX #11 #21 #31${NC}" result_test_006
-                    stage_3=1
-                    ;;
-            esac
-        else
-            print_not_ran "006" result_test_006
-        fi
-    fi
-    if [ "$run_test_007" -eq 1 ]; then
-        print_running "007" "Node2 Peripheral test"
-        result_test_007=""
-        if [ "$node2_not_ok" -eq 0 ]; then
-            wait $pid2
-            status2=$?
-            cat "$out2"
-            cat "$err2"
-            case $status2 in
-                0)
-                    print_passed "007" result_test_007
-                    run_test_007=0
-                    ;;
-                1)
-                    print_failed "007" "${BLUE}FIX #12 #22 #32${NC}" result_test_007
-                    stage_3=1
-                    ;;
-            esac
-            #tpi advanced msd --node 2 >/dev/null &
-            #pid2=$!
-        else
-            print_not_ran "007" result_test_007
-        fi
-    fi
-
-    advanced=0
-    if [ "$run_test_011" -eq 1 ]; then
-        tpi advanced msd --node 2 >/dev/null &
-        pid2=$!
-        advanced=1
-    fi
-
-    if [ "$run_test_008" -eq 1 ]; then
-        print_running "008" "Node3 Peripheral test"
-        result_test_008=""
-        if [ "$node3_not_ok" -eq 0 ]; then
-            wait $pid3
-            status3=$?
-            cat "$out3"
-            cat "$err3"
-            case $status3 in
-                0)
-                    print_passed "008" result_test_008
-                    run_test_008=0
-                    ;;
-                1)
-                    print_failed "008" "${MAGENTA}FIX #13 #23${NC}" result_test_008
-                    stage_3=1
-                    ;;
-                2)
-                    print_failed "008" "${MAGENTA}FIX #13 #33${NC}" result_test_008
-                    stage_3=1
-                    ;;
-                3)
-                    print_failed "008" "${MAGENTA}FIX #13 #23 #33${NC}" result_test_008
-                    stage_3=1
-                    ;;
-            esac
-        else
-            print_not_ran "008" result_test_008
-        fi
-    fi
-    if [ "$run_test_009" -eq 1 ]; then
-        print_running "009" "Node4 Peripheral test"
-        result_test_009=""
-        if [ "$node4_not_ok" -eq 0 ]; then
-            wait $pid4
-            status4=$?
-            cat "$out4"
-            cat "$err4"
-            case $status4 in
-                0)
-                    print_passed "009" result_test_009
-                    run_test_009=0
-                    ;;
-                1)
-                    print_failed "009" "${GREEN}FIX #14 #24${NC}" result_test_009
-                    stage_3=1
-                    ;;
-                2)
-                    print_failed "009" "${GREEN}FIX #14 #34${NC}" result_test_009
-                    stage_3=1
-                    ;;
-                3)
-                    print_failed "009" "${GREEN}FIX #14 #24 #34${NC}" result_test_009
-                    stage_3=1
-                    ;;
-            esac
-        else
-            print_not_ran "009" result_test_009
-        fi
-    fi
-
-    if [ "$run_test_010" -eq 1 ]; then
-        print_running "010" "Node1 USB Host test"
-        result_test_010=""
-        if [ "$node1_not_ok" -eq 0 ]; then
-            try_run_test "010-node1_usb_host_test.sh"
-            exit_code=$?
-            case $exit_code in
-                0)
-                    print_passed "010" result_test_010
-                    run_test_010=0
-                    ;;
-                1)
-                    print_failed "010" "FIX #02" result_test_010
-                    stage_3=1
-                    ;;
-            esac
-        else
-            print_not_ran "010" result_test_010
-        fi
-    fi
-
-    if [ "$run_test_011" -eq 1 ]; then
-        print_running "011" "USB_DEV test"
-        result_test_011=""
-        if [ "$node1_not_ok" -eq 0 ]; then
-            wait $pid2
-            tpi usb device --node 2 > /dev/null
-            sleep 0.5
-            try_run_test "010-usb_dev_test.sh"
-            exit_code=$?
-            case $exit_code in
-                0)
-                    print_passed "011" result_test_011
-                    run_test_011=0
-                    ;;
-                1)
-                    print_failed "011" "FIX #02" result_test_011
-                    stage_3=1
-                    ;;
-            esac
-        else
-            print_not_ran "011" result_test_011
-        fi
-    fi
-
-    if [ "$run_test_005" -eq 1 ] || [ "$run_test_007" -eq 1 ]; then
-        if [ "$advanced" -eq 1 ]; then
-            wait $pid2
-        fi
-        tpi advanced normal --node 2 >/dev/null
-        pid2=$!
-    fi
-
-    stage_3_test_results="$result_test_005$result_test_006$result_test_007$result_test_008$result_test_009$result_test_010$result_test_011"
-    final_result="$stage_1_test_results$stage_2_test_results$stage_3_test_results"
-
-    echo -e "\n\n\n---------------------------------------------"
-    echo -e "\n${YELLOW}All test results:${NC}"
-    echo -e "$final_result"
-
-    if [ "$stage_3" -eq 0 ]; then
-        break
-    fi
-
-    if ! confirm "Try again?"; then
-        echo "Please wait, shutting down the nodes safely..."
-        bash post_test.sh
-        echo "You can disconnect power now"
-        exit 1
-    fi
-    
-    
-    if [ "$node1_not_ok" -eq 1 ] || [ "$node2_not_ok" -eq 1 ] || [ "$node3_not_ok" -eq 1 ] || [ "$node4_not_ok" -eq 1 ]; then
-        run_test_005=1
-    fi
-
-    if [ "$run_test_005" -eq 1 ] || [ "$run_test_007" -eq 1 ]; then
-        wait $pid2
-    fi
-    
-done
-
-source install_official_firmware.sh
-wait
-
-echo -e "${GREEN}ALL TESTS PASSED${NC}"
-echo -e "${GREEN}Eject the SD card, restart the system${NC}\n\n"
+#!/bin/bash
+
+source helpers.sh
+
+# Define color codes
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[0;33m'
+BLUE='\033[0;34m'
+MAGENTA='\033[0;35m'
+CYAN='\033[0;36m'
+GRAY='\033[0;90m'
+NC='\033[0m' # No Color
+
+# Define the directory to search
+TEST_DIR="/factory"
+NON_EXECUTABLE_FILES=()
+EXIT_CODE=0
+
+echo -e "\n\n${RED}TURING PI FACTORY TESTING STARTED${NC}"
+
+#test_results=""
+
+print_running() {
+    local test_id="$1"
+    local test_name="$2"
+    str=$(echo -e "\n* [${test_id}] Running ${test_name}...")
+    echo "$str"
+    #test_results+="$str"$'\n'
+}
+
+print_passed() {
+    local test_id="$1"
+    local add_to=${2:-test_results}
+    str=$(echo -e "  [${test_id}] ${GREEN}PASSED${NC}")
+    echo "$str"
+    eval "$add_to+=\"\$str\"$'\n'"
+}
+
+print_failed() {
+    local test_id="$1"
+    local context="${2:-}"
+    local add_to=${3:-test_results}
+    str=$(echo -e "  [${test_id}] ${RED}FAILED${NC}    ${context}")
+    echo "$str"
+    eval "$add_to+=\"\$str\"$'\n'"
+}
+
+print_not_ran() {
+    local test_id="$1"
+    local add_to=${2:-test_results}
+    str=$(echo -e "  [${test_id}] ${GRAY}not ran${NC}")
+    echo "$str"
+    eval "$add_to+=\"\$str\"$'\n'"
+}
+
+try_run_test() {
+    local file="$1"
+    "$TEST_DIR/$file"
+    EXIT_CODE=$?
+
+    return $EXIT_CODE
+}
+
+#tpi advanced normal --node 2 >/dev/null
+#tpi power on > /dev/null
+tpi power --node 1 on >/dev/null &
+tpi power --node 2 on >/dev/null &
+tpi power --node 3 on >/dev/null &
+tpi power --node 4 on >/dev/null &
+
+test_results=""
+
+stage_1=0
+
+print_running "001" "Device Tree and EEPROM test"
+try_run_test "001-device_tree_and_eeprom_test.sh"
+exit_code=$?
+case $exit_code in
+    0)
+        print_passed "001"
+        ;;
+    1)
+        print_failed "001"
+        stage_1=1
+        ;;
+esac
+
+print_running "002" "RTC test"
+try_run_test "002-rtc-test.sh"
+exit_code=$?
+case $exit_code in
+    0)
+        print_passed "002"
+        ;;
+    1)
+        print_failed "002"
+        stage_1=1
+        ;;
+esac
+
+if [[ $stage_1 -ne 0 ]]; then
+    echo -e "\n${RED}Possibly a hardware issue on the TPi2 board${NC}"
+    exit 1
+fi
+
+stage_1_test_results="$test_results"
+test_results=""
+
+stage_2=0
+
+while true; do
+    print_running "003" "BMC Ethernet test"
+    try_run_test "003-bmc_ethernet_test.sh"
+    exit_code=$?
+    case $exit_code in
+        0)
+            print_passed "003"
+            stage_2=0
+            ;;
+        1)
+            print_failed "003" "FIX #01"
+            stage_2=1
+            ;;
+    esac
+    
+    if [ "$stage_2" -eq 0 ]; then
+        break
+    fi
+
+    if ! confirm "Try again?"; then
+        echo "Please wait, shutting down the nodes safely..."
+        bash post_test.sh
+        echo "You can disconnect power now"
+        exit 1
+    fi
+done
+
+stage_2_test_results="$test_results"
+test_results=""
+
+
+run_test_005=1
+result_test_005=""
+run_test_006=1
+result_test_006=""
+run_test_007=1
+result_test_007=""
+run_test_008=1
+result_test_008=""
+run_test_009=1
+result_test_009=""
+run_test_010=1
+result_test_010=""
+run_test_011=1
+result_test_011=""
+
+while true; do
+
+    stage_3=0
+
+    tpi power --node 1 on >/dev/null &
+    tpi power --node 2 on >/dev/null &
+    tpi power --node 3 on >/dev/null &
+    tpi power --node 4 on >/dev/null &
+
+
+    if [ "$run_test_005" -eq 1 ]; then
+        print_running "005" "Node Ethernet test"
+        try_run_test "005-node_ethernet_test.sh"
+        exit_code=$?
+
+        node1_not_ok=$((exit_code & 1))
+        node2_not_ok=$((exit_code & 2))
+        node3_not_ok=$((exit_code & 4))
+        node4_not_ok=$((exit_code & 8))
+
+        result_test_005=""
+        if [ "$node1_not_ok" -ne 0 ]; then
+            print_failed "005-1" "${YELLOW}FIX #11${NC}" result_test_005
+            stage_3=1
+        fi
+        if [ "$node2_not_ok" -ne 0 ]; then
+            print_failed "005-2" "${BLUE}FIX #12${NC}" result_test_005
+            stage_3=1
+        fi
+        if [ "$node3_not_ok" -ne 0 ]; then
+            print_failed "005-3" "${MAGENTA}FIX #13${NC}" result_test_005
+            stage_3=1
+        fi
+        if [ "$node4_not_ok" -ne 0 ]; then
+            print_failed "005-4" "${GREEN}FIX #14${NC}" result_test_005
+            stage_3=1
+        fi
+        if [ "$node1_not_ok" -eq 0 ] && [ "$node2_not_ok" -eq 0 ] && [ "$node3_not_ok" -eq 0 ] && [ "$node4_not_ok" -eq 0 ]; then
+            print_passed "005" result_test_005
+            run_test_005=0
+        fi
+    fi
+
+    #print_running "###" "peripheral tests"
+
+    if [ "$run_test_006" -eq 1 ] && [ "$node1_not_ok" -eq 0 ]; then
+        #print_running "006" "Node1 Peripheral test"
+        out1=$(mktemp -u)
+        err1=$(mktemp -u)
+        try_run_test "006-node1_peripheral_test.sh" >"$out1" 2>"$err1" &
+        pid1=$!
+    fi
+    if [ "$run_test_007" -eq 1 ] && [ "$node2_not_ok" -eq 0 ]; then
+        #print_running "007" "Node2 Peripheral test"
+        out2=$(mktemp -u)
+        err2=$(mktemp -u)
+        try_run_test "007-node2_peripheral_test.sh" >"$out2" 2>"$err2" &
+        pid2=$!
+    fi
+    if [ "$run_test_008" -eq 1 ] && [ "$node3_not_ok" -eq 0 ]; then
+        #print_running "008" "Node3 Peripheral test"
+        out3=$(mktemp -u)
+        err3=$(mktemp -u)
+        try_run_test "008-node3_peripheral_test.sh" >"$out3" 2>"$err3" &
+        pid3=$!
+    fi
+    if [ "$run_test_009" -eq 1 ] && [ "$node4_not_ok" -eq 0 ]; then
+        #print_running "009" "Node1 Peripheral test"
+        out4=$(mktemp -u)
+        err4=$(mktemp -u)
+        try_run_test "009-node4_peripheral_test.sh" >"$out4" 2>"$err4" &
+        pid4=$!
+    fi
+
+    if [ "$run_test_006" -eq 1 ]; then
+        print_running "006" "Node1 Peripheral test"
+        result_test_006=""
+        if [ "$node1_not_ok" -eq 0 ]; then
+            wait $pid1
+            status1=$?
+            cat "$out1"
+            cat "$err1"
+            case $status1 in
+                0)
+                    print_passed "006" result_test_006
+                    run_test_006=0
+                    ;;
+                1)
+                    print_failed "006" "${YELLOW}FIX #11 #21 #31${NC}" result_test_006
+                    stage_3=1
+                    ;;
+            esac
+        else
+            print_not_ran "006" result_test_006
+        fi
+    fi
+    if [ "$run_test_007" -eq 1 ]; then
+        print_running "007" "Node2 Peripheral test"
+        result_test_007=""
+        if [ "$node2_not_ok" -eq 0 ]; then
+            wait $pid2
+            status2=$?
+            cat "$out2"
+            cat "$err2"
+            case $status2 in
+                0)
+                    print_passed "007" result_test_007
+                    run_test_007=0
+                    ;;
+                1)
+                    print_failed "007" "${BLUE}FIX #12 #22 #32${NC}" result_test_007
+                    stage_3=1
+                    ;;
+            esac
+            #tpi advanced msd --node 2 >/dev/null &
+            #pid2=$!
+        else
+            print_not_ran "007" result_test_007
+        fi
+    fi
+
+    advanced=0
+    if [ "$run_test_011" -eq 1 ]; then
+        tpi advanced msd --node 2 >/dev/null &
+        pid2=$!
+        advanced=1
+    fi
+
+    if [ "$run_test_008" -eq 1 ]; then
+        print_running "008" "Node3 Peripheral test"
+        result_test_008=""
+        if [ "$node3_not_ok" -eq 0 ]; then
+            wait $pid3
+            status3=$?
+            cat "$out3"
+            cat "$err3"
+            case $status3 in
+                0)
+                    print_passed "008" result_test_008
+                    run_test_008=0
+                    ;;
+                1)
+                    print_failed "008" "${MAGENTA}FIX #13 #23${NC}" result_test_008
+                    stage_3=1
+                    ;;
+                2)
+                    print_failed "008" "${MAGENTA}FIX #13 #33${NC}" result_test_008
+                    stage_3=1
+                    ;;
+                3)
+                    print_failed "008" "${MAGENTA}FIX #13 #23 #33${NC}" result_test_008
+                    stage_3=1
+                    ;;
+            esac
+        else
+            print_not_ran "008" result_test_008
+        fi
+    fi
+    if [ "$run_test_009" -eq 1 ]; then
+        print_running "009" "Node4 Peripheral test"
+        result_test_009=""
+        if [ "$node4_not_ok" -eq 0 ]; then
+            wait $pid4
+            status4=$?
+            cat "$out4"
+            cat "$err4"
+            case $status4 in
+                0)
+                    print_passed "009" result_test_009
+                    run_test_009=0
+                    ;;
+                1)
+                    print_failed "009" "${GREEN}FIX #14 #24${NC}" result_test_009
+                    stage_3=1
+                    ;;
+                2)
+                    print_failed "009" "${GREEN}FIX #14 #34${NC}" result_test_009
+                    stage_3=1
+                    ;;
+                3)
+                    print_failed "009" "${GREEN}FIX #14 #24 #34${NC}" result_test_009
+                    stage_3=1
+                    ;;
+            esac
+        else
+            print_not_ran "009" result_test_009
+        fi
+    fi
+
+    if [ "$run_test_010" -eq 1 ]; then
+        print_running "010" "Node1 USB Host test"
+        result_test_010=""
+        if [ "$node1_not_ok" -eq 0 ]; then
+            try_run_test "010-node1_usb_host_test.sh"
+            exit_code=$?
+            case $exit_code in
+                0)
+                    print_passed "010" result_test_010
+                    run_test_010=0
+                    ;;
+                1)
+                    print_failed "010" "FIX #02" result_test_010
+                    stage_3=1
+                    ;;
+            esac
+        else
+            print_not_ran "010" result_test_010
+        fi
+    fi
+
+    if [ "$run_test_011" -eq 1 ]; then
+        print_running "011" "USB_DEV test"
+        result_test_011=""
+        if [ "$node1_not_ok" -eq 0 ]; then
+            wait $pid2
+            tpi usb device --node 2 > /dev/null
+            sleep 0.5
+            try_run_test "010-usb_dev_test.sh"
+            exit_code=$?
+            case $exit_code in
+                0)
+                    print_passed "011" result_test_011
+                    run_test_011=0
+                    ;;
+                1)
+                    print_failed "011" "FIX #02" result_test_011
+                    stage_3=1
+                    ;;
+            esac
+        else
+            print_not_ran "011" result_test_011
+        fi
+    fi
+
+    if [ "$run_test_005" -eq 1 ] || [ "$run_test_007" -eq 1 ]; then
+        if [ "$advanced" -eq 1 ]; then
+            wait $pid2
+        fi
+        tpi advanced normal --node 2 >/dev/null
+        pid2=$!
+    fi
+
+    stage_3_test_results="$result_test_005$result_test_006$result_test_007$result_test_008$result_test_009$result_test_010$result_test_011"
+    final_result="$stage_1_test_results$stage_2_test_results$stage_3_test_results"
+
+    echo -e "\n\n\n---------------------------------------------"
+    echo -e "\n${YELLOW}All test results:${NC}"
+    echo -e "$final_result"
+
+    if [ "$stage_3" -eq 0 ]; then
+        break
+    fi
+
+    if ! confirm "Try again?"; then
+        echo "Please wait, shutting down the nodes safely..."
+        bash post_test.sh
+        echo "You can disconnect power now"
+        exit 1
+    fi
+    
+    
+    if [ "$node1_not_ok" -eq 1 ] || [ "$node2_not_ok" -eq 1 ] || [ "$node3_not_ok" -eq 1 ] || [ "$node4_not_ok" -eq 1 ]; then
+        run_test_005=1
+    fi
+
+    if [ "$run_test_005" -eq 1 ] || [ "$run_test_007" -eq 1 ]; then
+        wait $pid2
+    fi
+    
+done
+
+source install_official_firmware.sh
+wait
+
+echo -e "${GREEN}ALL TESTS PASSED${NC}"
+echo -e "${GREEN}Eject the SD card, restart the system${NC}\n\n"
diff --git a/tp2bmc/board/tp2bmc/factory_overlay/upper/var/lib/bmcd/bmcd.bin b/tp2bmc/board/tp2bmc/factory_overlay/upper/var/lib/bmcd/bmcd.bin
new file mode 100755
index 00000000..3ed4939f
Binary files /dev/null and b/tp2bmc/board/tp2bmc/factory_overlay/upper/var/lib/bmcd/bmcd.bin differ