- 2019-11-24: 脚本开发完成，仅支持buster版本系统
由于树莓派默认源下载速度慢，所以开发该脚本，用于更换国内源，作者目前已将国内几家主流的树莓派源添加至配置列表config/website.list，具体使用方法下述有相关说明。
打开文件夹，运行 run.sh 脚本
./run运行结果如下：
Start executing the script.
Step 1: Get the system version code.
VERSION_CODENAME=buster
Step 2: Determine whether to connect to the network?
[OK] The network is connected.
Step 3: Determine if a profile exists.
[Exist] website list file: /home/pi/raspi_source_change/config/website.list
[Exist] software source file: /home/pi/raspi_source_change/config/software.source.buster
[Exist] system source file: /home/pi/raspi_source_change/config/system.source.buster
Step 4: Select the source that needs to be replaced.
Source List (In getting information, Please wait a moment):
|number |name |http_code |time_connect |speed_download |url
|0 |raspbian |200 |0.833397 |1074.000 |http://raspbian.raspberrypi.org/raspbian/
|1 |ustc |200 |0.099745 |2722.000 |http://mirrors.ustc.edu.cn/raspbian/raspbian/
|2 |aliyun |200 |0.122724 |2914.000 |http://mirrors.aliyun.com/raspbian/raspbian/
|3 |tuna.tsinghua |200 |0.040178 |14298.000 |http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/
|4 |scau |200 |0.053885 |10876.000 |https://mirrors.scau.edu.cn/raspbian/
|5 |neusoft |200 |0.031657 |32744.000 |http://mirrors.neusoft.edu.cn/raspbian/raspbian/
|6 |cqu |200 |0.054576 |3622.000 |http://mirrors.cqu.edu.cn/raspbian/raspbian/
Please enter the number where the source needs to be replaced (Default 0): 3
Replacing a source named : tuna.tsinghua
Step 5: Replace with the selected source.
[Exist] software source original file: /etc/apt/sources.list.bak
[Exist] system source original file: /etc/apt/sources.list.d/raspi.list.bak
Step 6: Update the list of sources.
Please wait a minute to update the source list.
Hit:1 http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian buster InRelease
Reading package lists... Done
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
Do you want to perform the update? It will take some time to execute (yes/no, default: no): y
Start the update task (Press Ctrl+C to exit).
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[OK] The source was replaced successfully.打开文件夹，运行 restore.sh 脚本
./restore运行结果如下：
Start executing the script.
Step 1: Determine whether to connect to the network?
[OK] The network is connected.
Step 2: Determine if the backup file exists?
[Exist] software list backup file: /etc/apt/sources.list.bak
[Exist] system source backup file: /etc/apt/sources.list.d/raspi.list.bak
Are you sure you are restoring the source file? (yes/no, default: no): y
Start the restore task (Press Ctrl+C to exit).
Step 3: Update the list of sources.
Please wait a minute to update the source list.
Get:1 http://mirrors.aliyun.com/raspbian/raspbian buster InRelease [15.0 kB]
Get:2 http://mirrors.aliyun.com/raspbian/raspbian buster/main armhf Packages [13.0 MB]
Get:3 http://mirrors.aliyun.com/raspbian/raspbian buster/contrib armhf Packages [58.7 kB]
Get:4 http://mirrors.aliyun.com/raspbian/raspbian buster/non-free armhf Packages [103 kB]
Get:5 http://mirrors.aliyun.com/raspbian/raspbian buster/rpi armhf Packages [1,360 B]
Fetched 13.2 MB in 13s (1,041 kB/s)
Reading package lists... Done
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:1 and /etc/apt/sources.list.d/raspi.list:1
Do you want to perform the update? It will take some time to execute (yes/no, default: no): y
Start the update task (Press Ctrl+C to exit).
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[OK] The source was restored successfully.