Crackhead engineering, Vol. 1: Clump of wires ⚙️

Open-source small meteo station for Atmega328p based boards

Retro wrist watch built with ATMega328PB uC and HP 5082-7415 obsolete LED 7-segment display

Originally designed as a parody of the Ahmed Mohamed clock that scandalized Texas in 2015.

UART to SMBus firmware for ATMega328p microcontrollers.

un proyecto de prueba de 'platformIO AVR' para compilar programas en C para ATmega328p con librerias de comunicacion serial, manejo de display LCD.

This project showcases the usefulness of the watchdog timer, available in many microcontrollers such as ATmega328p and STM32F401xE, using a Proteus simulation and from scratch driver.

Airsoft DOMINATION Timer based on Arduino with RFID or button user entry. Timer consist of MCU (Arduino or ATmega chip) and 2 or 4-row display that can calculate and visualise two times of two teams that are playing vs each other.

Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms

Source code for undergraduate research project written in C & latex

FPC/Lazarus serial oscilloscope

A blinking LED project using Uno R3, AVR LibC and C language.

Radio with an ATMega328, By Kerogs

I developed the Egg Incubator Project using an Arduino to maintain optimal hatching conditions with temperature and humidity control, and periodic egg turning. With a 100% hatch rate, this incubator features a DHT11 sensor, stepper motor for egg turning, LCD display for status, and buzzer alerts for critical conditions.

Generic firmware for ATmega328p for temperature monitoring, control of IOs and other external devices from a gateway using CAN protocol.

📟 Ray-caster written for the ATmega328 and the LCD TFT ST7735 using C99 and (some) ASM.

This repository contains detailed documentation and code for designing and developing a microcontroller-based Printed Circuit Board (PCB). The project focuses on creating a versatile and efficient platform for various embedded system applications, ensuring optimal performance, power efficiency, and ease of integration.

This IoT-integrated smart extension cord is developed for the semester 2 project under EN1190: Engineering Design Project.

Measure water level in a tank using vl53l0x sensor, display the percentage on MAX7219 display, bargraph and a seven segments

Electronic load 2022