Referring to the Comportable guideline for peripheral device functionality, the module pwrmgr has the following hardware interfaces defined
- Primary Clock:
clk_i
- Other Clocks:
clk_slow_i, clk_lc_i, clk_esc_i
- Bus Device Interfaces (TL-UL):
tl
- Bus Host Interfaces (TL-UL): none
- Peripheral Pins for Chip IO: none
| Port Name |
Package::Struct |
Type |
Act |
Width |
Description |
| pwr_ast |
pwrmgr_pkg::pwr_ast |
req_rsp |
req |
1 |
|
| pwr_rst |
pwrmgr_pkg::pwr_rst |
req_rsp |
req |
1 |
|
| pwr_clk |
pwrmgr_pkg::pwr_clk |
req_rsp |
req |
1 |
|
| pwr_otp |
pwrmgr_pkg::pwr_otp |
req_rsp |
req |
1 |
|
| pwr_lc |
pwrmgr_pkg::pwr_lc |
req_rsp |
req |
1 |
|
| pwr_flash |
pwrmgr_pkg::pwr_flash |
uni |
rcv |
1 |
|
| esc_rst_tx |
prim_esc_pkg::esc_tx |
uni |
rcv |
1 |
|
| esc_rst_rx |
prim_esc_pkg::esc_rx |
uni |
req |
1 |
|
| pwr_cpu |
rv_core_ibex_pkg::cpu_pwrmgr |
uni |
rcv |
1 |
|
| wakeups |
logic |
uni |
rcv |
6 |
|
| rstreqs |
logic |
uni |
rcv |
2 |
|
| ndmreset_req |
logic |
uni |
rcv |
1 |
|
| strap |
logic |
uni |
req |
1 |
|
| low_power |
logic |
uni |
req |
1 |
|
| rom_ctrl |
rom_ctrl_pkg::pwrmgr_data |
uni |
rcv |
1 |
|
| fetch_en |
lc_ctrl_pkg::lc_tx |
uni |
req |
1 |
|
| lc_dft_en |
lc_ctrl_pkg::lc_tx |
uni |
rcv |
1 |
|
| lc_hw_debug_en |
lc_ctrl_pkg::lc_tx |
uni |
rcv |
1 |
|
| sw_rst_req |
prim_mubi_pkg::mubi4 |
uni |
rcv |
1 |
|
| tl |
tlul_pkg::tl |
req_rsp |
rsp |
1 |
|
| Interrupt Name |
Type |
Description |
| wakeup |
Event |
Wake from low power state. See wake info for more details |
| Alert Name |
Description |
| fatal_fault |
This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected. |
| Countermeasure ID |
Description |
| PWRMGR.BUS.INTEGRITY |
End-to-end bus integrity scheme. |
| PWRMGR.LC_CTRL.INTERSIG.MUBI |
life cycle control / debug signals are multibit. |
| PWRMGR.ROM_CTRL.INTERSIG.MUBI |
rom control done/good signals are multibit. |
| PWRMGR.RSTMGR.INTERSIG.MUBI |
reset manager software request is multibit. |
| PWRMGR.ESC_RX.CLK.BKGN_CHK |
Escalation receiver has a background timeout check |
| PWRMGR.ESC_RX.CLK.LOCAL_ESC |
Escalation receiver clock timeout has a local reset escalation |
| PWRMGR.FSM.SPARSE |
Sparse encoding for slow and fast state machines. |
| PWRMGR.FSM.TERMINAL |
When FSMs reach a bad state, go into a terminate state that does not recover without user or external host intervention. |
| PWRMGR.CTRL_FLOW.GLOBAL_ESC |
When global escalation is received, proceed directly to reset. |
| PWRMGR.MAIN_PD.RST.LOCAL_ESC |
When main power domain reset glitches, proceed directly to reset. |
| PWRMGR.CTRL.CONFIG.REGWEN |
Main control protected by regwen. |
| PWRMGR.WAKEUP.CONFIG.REGWEN |
Wakeup configuration protected by regwen. |
| PWRMGR.RESET.CONFIG.REGWEN |
Reset configuration protected by regwen. |