Skip to content

Latest commit

 

History

History
98 lines (80 loc) · 4.28 KB

README.md

File metadata and controls

98 lines (80 loc) · 4.28 KB
Raw

NIN is now in my fork of caffe

An implementation of NIN is now in my fork of caffe cccp branch. it is called cccp layer, which is short for cascadable cross channel parametric pooling. It achieves slightly worse result on cifar10 than cuda-convnet with unknown reason. The cuda-convnet version of NIN has been very robust, I ran many times on CIFAR-10 and it all gets good result. So if your result is not as good, don't hesitate to contact me and we'll figure out why.

cuda-convnet

started from Alex's code on google code

run NIN using this code

I implemented cccp (cascadable cross channel parameteric) pooling in this code. The NIN structure is in my paper: Network In Network submitted on ICLR2014.

compiling the code

To compile this code, cuda-5.0 or cuda-5.5 is required. The other dependencies are listed here. Setup the paths in the build.sh script under Kernel and PluginSrc. Run ./build.sh under the main directory. A dist directory will be created with all python codes and built shared libraries inside. change directory into dist, and add current path to LD_LIBRARY_PATH by

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:./

All the experiments are run in the dist directory.

the data

The datasets are preprocessed according to maxout networks using the python code in pylearn. How to preprocess the data is detailed here. However, things are complicated because cuda-convnet has a different data format than pylearn, the way to dump cuda-convnet usable data is here.

The preprocessed CIFAR-10, CIFAR-100 and MNIST datasets are available on my google drive (just follow the link), but SVHN will not as it is around 20G after preprocessing.

Here is an example code to convert the pylearn preprocessed train.pkl and test.pkl to cuda-convnet data_batch_x files for CIFAR-10 data.

import cPickle
import numpy
train=cPickle.load(open('train.pkl'))
for i in range(5):
    sub = train.__dict__['X'][i*10000:i*10000+10000,:]
    data=cPickle.load(open('../cifar-10-batches-py/data_batch_%d' % (i+1), 'r'))
    data['data']=numpy.require(sub.T, numpy.float32, 'C')
    cPickle.dump(data, open('data_batch_%d' % (i+1), 'w'))

test=cPickle.load(open('test.pkl'))
sub = test.__dict__['X']
data=cPickle.load(open('../cifar-10-batches-py/data_batch_6', 'r'))
data['data']=numpy.require(sub.T, numpy.float32, 'C')
cPickle.dump(data, open('data_batch_6', 'w'))

running the datasets

CIFAR-10

run the following under dist.

python convnet.py --data-path /path/to/cifar-10/pickled/data --data-provider cifar --layer-def ../NIN/cifar-10_def --layer-params ../NIN/cifar_10-params --train-range 1-5 --test-range 6 --save-path /path/to/save/the/model/ --test-freq 20 --epochs 200

This trains the model defined in NIN/cifar-10_def using the the parameter in NIN/cifar-10_params for 200 epochs. After 200 epochs, the test error is around 14% After this, edit the NIN/cifar-10_params file by changing all the epsW to one tenth of the original value. and run:

python convnet.py -f /path/where/model/was/saved/ --epochs 230

This will run the model with the adjusted parameters for another 30 epochs, which results in error rate near 10.7%

Then change the epsW to one tenth again and run:

python convnet.py -f /path/where/model/was/saved/ --epochs 260

Then the error rate will be 10.4%

CIFAR-100

CIFAR-100 is similar to CIFAR-10 but just replace some parameters in the script.

python convnet.py --data-path /path/to/cifar-100/pickled/data --data-provider cifar --layer-def ../NIN/cifar-100_def --layer-params ../NIN/cifar_100-params --train-range 1-5 --test-range 6 --save-path /path/to/save/the/model/ --test-freq 20 --epochs 200

The rest is the same with CIFAR-10

SVHN

Coming soon.

MNIST

Coming soon.