[NUCLEO-H563ZI]: Cannot program board

[ypearson-bdai]

• [ /V3] Programmer/board type: [enter here] (e.g STLINK /V1, /V2, /V2-onboard, /V2-clone, /V3)
• [Ubuntu ] Operating system an version: [enter here] (e.g Linux, Windows)
• [1.8.0 ] stlink tools version and/or git commit hash: [enter here] (e.g v1.6.1/git-d0416149)
• [ st-flash --connect-under-reset write build/NUCLEO-H563ZI.bin 0x8000000] stlink commandline tool name: [enter here] (e.g st-info, st-flash, st-trace, st-util)
• [ STM32H56x/573] Target chip (and board, if applicable): [enter here] (e.g STM32F103C8T6 (NUCLEO-F103RB))

st-flash --connect-under-reset write build/NUCLEO-H563ZI.bin 0x8000000
st-flash 1.8.0
2024-07-01T11:46:40 WARN common.c: NRST is not connected
2024-07-01T11:46:40 ERROR common.c: Soft reset failed: error write to AIRCR
2024-07-01T11:46:40 ERROR common.c: Can not connect to target. Please use 'connect under reset' and try again
Failed to connect to target
Failed to parse flash type or unrecognized flash type

[ashiqguntupalli]

Any update on this issue?
I do have the same problem while programming the NUCLEO-H563ZI 144 pin board.

[Nightwalker-87]

Duplicate of #1384.