Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

CAD Files for EBB and D2F Options #56

Open
eprouty opened this issue Aug 31, 2024 · 2 comments
Open

CAD Files for EBB and D2F Options #56

eprouty opened this issue Aug 31, 2024 · 2 comments

Comments

@eprouty
Copy link

eprouty commented Aug 31, 2024

I want to update the EBB and D2F options from the old motor plate, in order to support the new motor plate and M6 bowden couplers. However, the CAD files for these old motor variants are missing.

Does anyone have these they can add? or know where I can find them?

@eprouty
Copy link
Author

eprouty commented Aug 31, 2024

@EmJay276 Do you happen to have these? Saw you had an open PR for other new motor plate STLs

@EmJay276
Copy link
Contributor

EmJay276 commented Sep 3, 2024

Did you check my changes?
https://github.com/EmJay276/ERCF_v2/blob/CW2_new_motor_plate/Recommended_Options/ERF_Filament_Cutter/README.md
I already modified the versions for the 1_Toolhead_And_Entry_Sensors, 2_Toolhead_Sensor (EBB Board) and 3_Entry_Sensor

I think they were only available as STL when I modified them. So I could just do a boolean operation to remove the additional material. I attached the parts I removed from the STLs, if you need to modify other parts.
One has an Offset to fix some issues concerning the triangulation of the STL where tiny parts were left after the boolean operation.
CW2_cutoffs_old_motor_plate.zip

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants