When using SB_CS2_Main_Buddy_EBB_ECAS_D2F big gap with default cable cover?

[MaikelKelder]

Hi,

Not really an issue, but when using this SB_CS2_Main_Buddy_EBB_ECAS_D2F you leave a big gap open when using the default cable cover for the Stealthburner.
I wasnt able to find a adjusted one, I almost assume it exists?

Thanks for the MOD, its a beast! saving so much issues swapping filaments.

[k5beason]

Same issue. Did you ever find the correct cover?

[k5beason]

I believe the BTT files will work https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl

[MaikelKelder]

I will check it out, thx! Op wo 8 nov 2023 om 03:02 schreef k5beason ***@***.***>

…

I believe the BTT files will work https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl — Reply to this email directly, view it on GitHub <#24 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJAM5W6RNPV4PGLWDRJQM53YDLR2VAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBQHA4DMNRSGU> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[k5beason]

I will check it out, thx!

Op wo 8 nov 2023 om 03:02 schreef k5beason @.***>

I believe the BTT files will work

https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl

—

Reply to this email directly, view it on GitHub

#24 (comment),

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AJAM5W6RNPV4PGLWDRJQM53YDLR2VAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBQHA4DMNRSGU

.

You are receiving this because you authored the thread.Message ID:

@.***>

Let me know. On mine the bottom securing screw hole is about 1-2mm off still. I can't find any other covers that are close.

[gabber130779]

same problem, but solved. I modified the cable door from BTT. you can find it here.

https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec

[MaikelKelder]

Thank you!!

…

On Fri, 19 Apr 2024 at 16:47, gabber130779 ***@***.***> wrote: same problem, but solved. I modified the cable door from BTT. you can find it here. https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec — Reply to this email directly, view it on GitHub <#24 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJAM5WYQ4MAPITMXMU7HCCTY6EVBPAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWG4ZTSMJSG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[gabber130779]

Thank you!!

On Fri, 19 Apr 2024 at 16:47, gabber130779 @.***> wrote:

same problem, but solved. I modified the cable door from BTT. you can find
it here.

https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec

—
Reply to this email directly, view it on GitHub
#24 (comment),
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AJAM5WYQ4MAPITMXMU7HCCTY6EVBPAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWG4ZTSMJSG4
.
You are receiving this because you authored the thread.Message ID:
@.***>

Did it fit now?

[MaikelKelder]

No, doenst fit, I guess the version with a double sensor in there is thicker or so.
Im using the OLD version of the CW2 motor plates, because of that, double sensors.
It also has a cutout for the 2209 canbus on the bottom.
I guess I have to get creative to get one fitting ;-)

[MaikelKelder]

I am going to try this body, also double sensor, but no cutout and sensor is screwed on from bottom, much better.
Lets see if I can find a door for that, otherwise, ill make one and post it.

[MaikelKelder]

Ok, I jus tprinted and fitted these and they work together. Your cover also fits but the hole for the screw is only just out of place, 2mm or so.

Vented Cover:
https://www.printables.com/model/772880-ebb-sb22402209-vented-cable-door-jan-2024-update/files

double sensor CW2 plate:
https://www.printables.com/model/826480-filametrix-body-cw2-for-sb2209sb2240-with-dual-fil