.. index:: single: HttpClient single: Components; HttpClient
The HttpClient component is a low-level HTTP client with support for both PHP stream wrappers and cURL. It provides utilities to consume APIs and supports synchronous and asynchronous operations. You can install it with:
$ composer require symfony/http-client
Use the :class:`Symfony\\Component\\HttpClient\\HttpClient` class to make
requests. In the Symfony framework, this class is available as the
http_client service. This service will be :doc:`autowired </service_container/autowiring>`
automatically when type-hinting for :class:`Symfony\\Contracts\\HttpClient\\HttpClientInterface`:
.. configuration-block::
.. code-block:: php-symfony
use Symfony\Contracts\HttpClient\HttpClientInterface;
class SymfonyDocs
{
private $client;
public function __construct(HttpClientInterface $client)
{
$this->client = $client;
}
public function fetchGitHubInformation(): array
{
$response = $this->client->request(
'GET',
'https://api.github.com/repos/symfony/symfony-docs'
);
$statusCode = $response->getStatusCode();
// $statusCode = 200
$contentType = $response->getHeaders()['content-type'][0];
// $contentType = 'application/json'
$content = $response->getContent();
// $content = '{"id":521583, "name":"symfony-docs", ...}'
$content = $response->toArray();
// $content = ['id' => 521583, 'name' => 'symfony-docs', ...]
return $content;
}
}
.. code-block:: php-standalone
use Symfony\Component\HttpClient\HttpClient;
$client = HttpClient::create();
$response = $client->request('GET', 'https://api.github.com/repos/symfony/symfony-docs');
$statusCode = $response->getStatusCode();
// $statusCode = 200
$contentType = $response->getHeaders()['content-type'][0];
// $contentType = 'application/json'
$content = $response->getContent();
// $content = '{"id":521583, "name":"symfony-docs", ...}'
$content = $response->toArray();
// $content = ['id' => 521583, 'name' => 'symfony-docs', ...]
Tip
The HTTP client is interoperable with many common HTTP client abstractions in PHP. You can also use any of these abstractions to profit from autowirings. See Interoperability for more information.
The HTTP client contains many options you might need to take full control of the way the request is performed, including DNS pre-resolution, SSL parameters, public key pinning, etc. They can be defined globally in the configuration (to apply it to all requests) and to each request (which overrides any global configuration).
You can configure the global options using the default_options option:
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
default_options:
max_redirects: 7
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<framework:default-options max-redirects="7"/>
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()
->defaultOptions()
->maxRedirects(7)
;
};
.. code-block:: php-standalone
$client = HttpClient::create([
'max_redirects' => 7,
]);
You can also use the :method:`Symfony\\Contracts\\HttpClient\\HttpClientInterface::withOptions` method to retrieve a new instance of the client with new default options:
$this->client = $client->withOptions([
'base_uri' => 'https://...',
'headers' => ['header-name' => 'header-value']
]);
.. versionadded:: 5.3
The ``withOptions()`` method was introduced in Symfony 5.3.
Some options are described in this guide:
Check out the full :ref:`http_client config reference <reference-http-client>` to learn about all the options.
The HTTP client also has one configuration option called
max_host_connections, this option can not be overridden by a request:
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
max_host_connections: 10
# ...
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client max-host-connections="10">
<!-- ... -->
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()
->maxHostConnections(10)
// ...
;
};
.. code-block:: php-standalone
$client = HttpClient::create([], 10);
It's common that some of the HTTP client options depend on the URL of the request (e.g. you must set some headers when making requests to GitHub API but not for other hosts). If that's your case, the component provides scoped clients (using :class:`Symfony\\Component\\HttpClient\\ScopingHttpClient`) to autoconfigure the HTTP client based on the requested URL:
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
scoped_clients:
# only requests matching scope will use these options
github.client:
scope: 'https://api\.github\.com'
headers:
Accept: 'application/vnd.github.v3+json'
Authorization: 'token %env(GITHUB_API_TOKEN)%'
# ...
# using base_uri, relative URLs (e.g. request("GET", "/repos/symfony/symfony-docs"))
# will default to these options
github.client:
base_uri: 'https://api.github.com'
headers:
Accept: 'application/vnd.github.v3+json'
Authorization: 'token %env(GITHUB_API_TOKEN)%'
# ...
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<!-- only requests matching scope will use these options -->
<framework:scoped-client name="github.client"
scope="https://api\.github\.com"
>
<framework:header name="Accept">application/vnd.github.v3+json</framework:header>
<framework:header name="Authorization">token %env(GITHUB_API_TOKEN)%</framework:header>
</framework:scoped-client>
<!-- using base-uri, relative URLs (e.g. request("GET", "/repos/symfony/symfony-docs"))
will default to these options -->
<framework:scoped-client name="github.client"
base-uri="https://api.github.com"
>
<framework:header name="Accept">application/vnd.github.v3+json</framework:header>
<framework:header name="Authorization">token %env(GITHUB_API_TOKEN)%</framework:header>
</framework:scoped-client>
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// only requests matching scope will use these options
$framework->httpClient()->scopedClient('github.client')
->scope('https://api\.github\.com')
->header('Accept', 'application/vnd.github.v3+json')
->header('Authorization', 'token %env(GITHUB_API_TOKEN)%')
// ...
;
// using base_url, relative URLs (e.g. request("GET", "/repos/symfony/symfony-docs"))
// will default to these options
$framework->httpClient()->scopedClient('github.client')
->baseUri('https://api.github.com')
->header('Accept', 'application/vnd.github.v3+json')
->header('Authorization', 'token %env(GITHUB_API_TOKEN)%')
// ...
;
};
.. code-block:: php-standalone
use Symfony\Component\HttpClient\HttpClient;
use Symfony\Component\HttpClient\ScopingHttpClient;
$client = HttpClient::create();
$client = new ScopingHttpClient($client, [
// the options defined as values apply only to the URLs matching
// the regular expressions defined as keys
'https://api\.github\.com/' => [
'headers' => [
'Accept' => 'application/vnd.github.v3+json',
'Authorization' => 'token '.$githubToken,
],
],
// ...
]);
// relative URLs will use the 2nd argument as base URI and use the options of the 3rd argument
$client = ScopingHttpClient::forBaseUri($client, 'https://api.github.com/', [
'headers' => [
'Accept' => 'application/vnd.github.v3+json',
'Authorization' => 'token '.$githubToken,
],
]);
You can define several scopes, so that each set of options is added only if a
requested URL matches one of the regular expressions set by the scope option.
If you use scoped clients in the Symfony framework, you must use any of the methods defined by Symfony to :ref:`choose a specific service <services-wire-specific-service>`. Each client has a unique service named after its configuration.
Each scoped client also defines a corresponding named autowiring alias.
If you use for example
Symfony\Contracts\HttpClient\HttpClientInterface $githubClient
as the type and name of an argument, autowiring will inject the github.client
service into your autowired classes.
Note
Read the :ref:`base_uri option docs <reference-http-client-base-uri>` to learn the rules applied when merging relative URIs into the base URI of the scoped client.
The HTTP client provides a single request() method to perform all kinds of
HTTP requests:
$response = $client->request('GET', 'https://...');
$response = $client->request('POST', 'https://...');
$response = $client->request('PUT', 'https://...');
// ...
// you can add request options (or override global ones) using the 3rd argument
$response = $client->request('GET', 'https://...', [
'headers' => [
'Accept' => 'application/json',
],
]);
Responses are always asynchronous, so that the call to the method returns immediately instead of waiting to receive the response:
// code execution continues immediately; it doesn't wait to receive the response
$response = $client->request('GET', 'http://releases.ubuntu.com/18.04.2/ubuntu-18.04.2-desktop-amd64.iso');
// getting the response headers waits until they arrive
$contentType = $response->getHeaders()['content-type'][0];
// trying to get the response content will block the execution until
// the full response content is received
$content = $response->getContent();
This component also supports :ref:`streaming responses <http-client-streaming-responses>` for full asynchronous applications.
Note
HTTP compression and chunked transfer encoding are automatically enabled when both your PHP runtime and the remote server support them.
The HTTP client supports different authentication mechanisms. They can be defined globally in the configuration (to apply it to all requests) and to each request (which overrides any global authentication):
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
scoped_clients:
example_api:
base_uri: 'https://example.com/'
# HTTP Basic authentication
auth_basic: 'the-username:the-password'
# HTTP Bearer authentication (also called token authentication)
auth_bearer: the-bearer-token
# Microsoft NTLM authentication
auth_ntlm: 'the-username:the-password'
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<!-- Available authentication options:
auth-basic: HTTP Basic authentication
auth-bearer: HTTP Bearer authentication (also called token authentication)
auth-ntlm: Microsoft NTLM authentication -->
<framework:scoped-client name="example_api"
base-uri="https://example.com/"
auth-basic="the-username:the-password"
auth-bearer="the-bearer-token"
auth-ntlm="the-username:the-password"
/>
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()->scopedClient('example_api')
->baseUri('https://example.com/')
// HTTP Basic authentication
->authBasic('the-username:the-password')
// HTTP Bearer authentication (also called token authentication)
->authBearer('the-bearer-token')
// Microsoft NTLM authentication
->authNtlm('the-username:the-password')
;
};
.. code-block:: php-standalone
$client = HttpClient::createForBaseUri('https://example.com/', [
// HTTP Basic authentication (there are multiple ways of configuring it)
'auth_basic' => ['the-username'],
'auth_basic' => ['the-username', 'the-password'],
'auth_basic' => 'the-username:the-password',
// HTTP Bearer authentication (also called token authentication)
'auth_bearer' => 'the-bearer-token',
// Microsoft NTLM authentication (there are multiple ways of configuring it)
'auth_ntlm' => ['the-username'],
'auth_ntlm' => ['the-username', 'the-password'],
'auth_ntlm' => 'the-username:the-password',
]);
$response = $client->request('GET', 'https://...', [
// use a different HTTP Basic authentication only for this request
'auth_basic' => ['the-username', 'the-password'],
// ...
]);Note
The NTLM authentication mechanism requires using the cURL transport.
By using HttpClient::createForBaseUri(), we ensure that the auth credentials
won't be sent to any other hosts than https://example.com/.
You can either append them manually to the requested URL, or define them as an
associative array via the query option, that will be merged with the URL:
// it makes an HTTP GET request to https://httpbin.org/get?token=...&name=...
$response = $client->request('GET', 'https://httpbin.org/get', [
// these values are automatically encoded before including them in the URL
'query' => [
'token' => '...',
'name' => '...',
],
]);
Use the headers option to define the default headers added to all requests:
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
default_options:
headers:
'User-Agent': 'My Fancy App'
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<framework:default-options>
<framework:header name="User-Agent">My Fancy App</framework:header>
</framework:default-options>
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()
->defaultOptions()
->header('User-Agent', 'My Fancy App')
;
};
.. code-block:: php-standalone
// this header is added to all requests made by this client
$client = HttpClient::create([
'headers' => [
'User-Agent' => 'My Fancy App',
],
]);
You can also set new headers or override the default ones for specific requests:
// this header is only included in this request and overrides the value
// of the same header if defined globally by the HTTP client
$response = $client->request('POST', 'https://...', [
'headers' => [
'Content-Type' => 'text/plain',
],
]);
This component provides several methods for uploading data using the body
option. You can use regular strings, closures, iterables and resources and they'll be
processed automatically when making the requests:
$response = $client->request('POST', 'https://...', [
// defining data using a regular string
'body' => 'raw data',
// defining data using an array of parameters
'body' => ['parameter1' => 'value1', '...'],
// using a closure to generate the uploaded data
'body' => function (int $size): string {
// ...
},
// using a resource to get the data from it
'body' => fopen('/path/to/file', 'r'),
]);
When uploading data with the POST method, if you don't define the
Content-Type HTTP header explicitly, Symfony assumes that you're uploading
form data and adds the required
'Content-Type: application/x-www-form-urlencoded' header for you.
When the body option is set as a closure, it will be called several times until
it returns the empty string, which signals the end of the body. Each time, the
closure should return a string smaller than the amount requested as argument.
A generator or any Traversable can also be used instead of a closure.
Tip
When uploading JSON payloads, use the json option instead of body. The
given content will be JSON-encoded automatically and the request will add the
Content-Type: application/json automatically too:
$response = $client->request('POST', 'https://...', [
'json' => ['param1' => 'value1', '...'],
]);
$decodedPayload = $response->toArray();
To submit a form with file uploads, it is your responsibility to encode the body
according to the multipart/form-data content-type. The
:doc:`Symfony Mime </components/mime>` component makes it a few lines of code:
use Symfony\Component\Mime\Part\DataPart;
use Symfony\Component\Mime\Part\Multipart\FormDataPart;
$formFields = [
'regular_field' => 'some value',
'file_field' => DataPart::fromPath('/path/to/uploaded/file'),
];
$formData = new FormDataPart($formFields);
$client->request('POST', 'https://...', [
'headers' => $formData->getPreparedHeaders()->toArray(),
'body' => $formData->bodyToIterable(),
]);
Tip
When using multidimensional arrays the :class:`Symfony\\Component\\Mime\\Part\\Multipart\\FormDataPart`
class automatically appends [key] to the name of the field:
$formData = new FormDataPart([
'array_field' => [
'some value',
'other value',
],
]);
$formData->getParts(); // Returns two instances of TextPart
// with the names "array_field[0]" and "array_field[1]"
This behavior can be bypassed by using the following array structure:
$formData = new FormDataPart([
['array_field' => 'some value'],
['array_field' => 'other value'],
]);
$formData->getParts(); // Returns two instances of TextPart both
// with the name "array_field"
.. versionadded:: 5.2
The alternative array structure was introduced in Symfony 5.2.
By default, HttpClient streams the body contents when uploading them. This might
not work with all servers, resulting in HTTP status code 411 ("Length Required")
because there is no Content-Length header. The solution is to turn the body
into a string with the following method (which will increase memory consumption
when the streams are large):
$client->request('POST', 'https://...', [
// ...
'body' => $formData->bodyToString(),
]);
If you need to add a custom HTTP header to the upload, you can do:
$headers = $formData->getPreparedHeaders()->toArray(); $headers[] = 'X-Foo: bar';
The HTTP client provided by this component is stateless but handling cookies requires a stateful storage (because responses can update cookies and they must be used for subsequent requests). That's why this component doesn't handle cookies automatically.
You can either handle cookies yourself using the Cookie HTTP header or use
the :doc:`BrowserKit component </components/browser_kit>` which provides this
feature and integrates seamlessly with the HttpClient component.
By default, the HTTP client follows redirects, up to a maximum of 20, when
making a request. Use the max_redirects setting to configure this behavior
(if the number of redirects is higher than the configured value, you'll get a
:class:`Symfony\\Component\\HttpClient\\Exception\\RedirectionException`):
$response = $client->request('GET', 'https://...', [
// 0 means to not follow any redirect
'max_redirects' => 0,
]);
.. versionadded:: 5.2
The feature to retry failed HTTP requests was introduced in Symfony 5.2.
Sometimes, requests fail because of network issues or temporary server errors. Symfony's HttpClient allows to retry failed requests automatically using the :ref:`retry_failed option <reference-http-client-retry-failed>`.
By default, failed requests are retried up to 3 times, with an exponential delay
between retries (first retry = 1 second; third retry: 4 seconds) and only for
the following HTTP status codes: 423, 425, 429, 502 and 503
when using any HTTP method and 500, 504, 507 and 510 when using
an HTTP idempotent method.
Check out the full list of configurable :ref:`retry_failed options <reference-http-client-retry-failed>` to learn how to tweak each of them to fit your application needs.
When using the HttpClient outside of a Symfony application, use the :class:`Symfony\\Component\\HttpClient\\RetryableHttpClient` class to wrap your original HTTP client:
use Symfony\Component\HttpClient\RetryableHttpClient; $client = new RetryableHttpClient(HttpClient::create());
The RetryableHttpClient uses a
:class:`Symfony\\Component\\HttpClient\\Retry\\RetryStrategyInterface` to
decide if the request should be retried, and to define the waiting time between
each retry.
By default, this component honors the standard environment variables that your Operating System defines to direct the HTTP traffic through your local proxy. This means there is usually nothing to configure to have the client work with proxies, provided these env vars are properly configured.
You can still set or override these settings using the proxy and no_proxy
options:
proxyshould be set to thehttp://...URL of the proxy to get throughno_proxydisables the proxy for a comma-separated list of hosts that do not require it to get reached.
By providing a callable to the on_progress option, one can track
uploads/downloads as they complete. This callback is guaranteed to be called on
DNS resolution, on arrival of headers and on completion; additionally it is
called when new data is uploaded or downloaded and at least once per second:
$response = $client->request('GET', 'https://...', [
'on_progress' => function (int $dlNow, int $dlSize, array $info): void {
// $dlNow is the number of bytes downloaded so far
// $dlSize is the total size to be downloaded or -1 if it is unknown
// $info is what $response->getInfo() would return at this very time
},
]);
Any exceptions thrown from the callback will be wrapped in an instance of
TransportExceptionInterface and will abort the request.
HttpClient uses the system's certificate store to validate SSL certificates (while browsers use their own stores). When using self-signed certificates during development, it's recommended to create your own certificate authority (CA) and add it to your system's store.
Alternatively, you can also disable verify_host and verify_peer (see
:ref:`http_client config reference <reference-http-client>`), but this is not
recommended in production.
The component is built for maximum HTTP performance. By design, it is compatible with HTTP/2 and with doing concurrent asynchronous streamed and multiplexed requests/responses. Even when doing regular synchronous calls, this design allows keeping connections to remote hosts open between requests, improving performance by saving repetitive DNS resolution, SSL negotiation, etc. To leverage all these design benefits, the cURL extension is needed.
This component supports both the native PHP streams and cURL to make the HTTP requests. Although both are interchangeable and provide the same features, including concurrent requests, HTTP/2 is only supported when using cURL.
HttpClient::create() selects the cURL transport if the cURL PHP extension
is enabled and falls back to PHP streams otherwise. If you prefer to select
the transport explicitly, use the following classes to create the client:
use Symfony\Component\HttpClient\CurlHttpClient; use Symfony\Component\HttpClient\NativeHttpClient; // uses native PHP streams $client = new NativeHttpClient(); // uses the cURL PHP extension $client = new CurlHttpClient();
When using this component in a full-stack Symfony application, this behavior is not configurable and cURL will be used automatically if the cURL PHP extension is installed and enabled. Otherwise, the native PHP streams will be used.
.. versionadded:: 5.2
The feature to configure extra cURL options was introduced in Symfony 5.2.
PHP allows to configure lots of cURL options via the :phpfunction:`curl_setopt`
function. In order to make the component more portable when not using cURL, the
CurlHttpClient only uses some of those options (and they are ignored in the
rest of clients).
Add an extra.curl option in your configuration to pass those extra options:
use Symfony\Component\HttpClient\CurlHttpClient;
$client = new CurlHttpClient();
$client->request('POST', 'https://...', [
// ...
'extra' => [
'curl' => [
CURLOPT_IPRESOLVE => CURL_IPRESOLVE_V6,
],
],
]);
Note
Some cURL options are impossible to override (e.g. because of thread safety) and you'll get an exception when trying to override them.
When requesting an https URL, HTTP/2 is enabled by default if one of the
following tools is installed:
- The libcurl package version 7.36 or higher;
- The amphp/http-client Packagist package version 4.2 or higher.
.. versionadded:: 5.1
Integration with ``amphp/http-client`` was introduced in Symfony 5.1.
Prior to this version, HTTP/2 was only supported when ``libcurl`` was
installed.
To force HTTP/2 for http URLs, you need to enable it explicitly via the
http_version option:
.. configuration-block::
.. code-block:: yaml
# config/packages/framework.yaml
framework:
http_client:
default_options:
http_version: '2.0'
.. code-block:: xml
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<framework:default-options http-version="2.0"/>
</framework:http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()
->defaultOptions()
->httpVersion('2.0')
;
};
.. code-block:: php-standalone
$client = HttpClient::create(['http_version' => '2.0']);
Support for HTTP/2 PUSH works out of the box when libcurl >= 7.61 is used with PHP >= 7.2.17 / 7.3.4: pushed responses are put into a temporary cache and are used when a subsequent request is triggered for the corresponding URLs.
The response returned by all HTTP clients is an object of type :class:`Symfony\\Contracts\\HttpClient\\ResponseInterface` which provides the following methods:
$response = $client->request('GET', 'https://...');
// gets the HTTP status code of the response
$statusCode = $response->getStatusCode();
// gets the HTTP headers as string[][] with the header names lower-cased
$headers = $response->getHeaders();
// gets the response body as a string
$content = $response->getContent();
// casts the response JSON content to a PHP array
$content = $response->toArray();
// casts the response content to a PHP stream resource
$content = $response->toStream();
// cancels the request/response
$response->cancel();
// returns info coming from the transport layer, such as "response_headers",
// "redirect_count", "start_time", "redirect_url", etc.
$httpInfo = $response->getInfo();
// you can get individual info too
$startTime = $response->getInfo('start_time');
// e.g. this returns the final response URL (resolving redirections if needed)
$url = $response->getInfo('url');
// returns detailed logs about the requests and responses of the HTTP transaction
$httpLogs = $response->getInfo('debug');
Note
$response->getInfo() is non-blocking: it returns live information
about the response. Some of them might not be known yet (e.g. http_code)
when you'll call it.
Call the stream() method of the HTTP client to get chunks of the
response sequentially instead of waiting for the entire response:
$url = 'https://releases.ubuntu.com/18.04.1/ubuntu-18.04.1-desktop-amd64.iso';
$response = $client->request('GET', $url);
// Responses are lazy: this code is executed as soon as headers are received
if (200 !== $response->getStatusCode()) {
throw new \Exception('...');
}
// get the response content in chunks and save them in a file
// response chunks implement Symfony\Contracts\HttpClient\ChunkInterface
$fileHandler = fopen('/ubuntu.iso', 'w');
foreach ($client->stream($response) as $chunk) {
fwrite($fileHandler, $chunk->getContent());
}
Note
By default, text/*, JSON and XML response bodies are buffered in a local
php://temp stream. You can control this behavior by using the buffer
option: set it to true/false to enable/disable buffering, or to a
closure that should return the same based on the response headers it receives
as argument.
To abort a request (e.g. because it didn't complete in due time, or you want to
fetch only the first bytes of the response, etc.), you can either use the
cancel() method of ResponseInterface:
$response->cancel();
Or throw an exception from a progress callback:
$response = $client->request('GET', 'https://...', [
'on_progress' => function (int $dlNow, int $dlSize, array $info): void {
// ...
throw new \MyException();
},
]);
The exception will be wrapped in an instance of TransportExceptionInterface
and will abort the request.
In case the response was canceled using $response->cancel(),
$response->getInfo('canceled') will return true.
When the HTTP status code of the response is in the 300-599 range (i.e. 3xx,
4xx or 5xx) your code is expected to handle it. If you don't do that, the
getHeaders(), getContent() and toArray() methods throw an appropriate exception, all of
which implement the :class:`Symfony\\Contracts\\HttpClient\\Exception\\HttpExceptionInterface`:
// the response of this request will be a 403 HTTP error
$response = $client->request('GET', 'https://httpbin.org/status/403');
// this code results in a Symfony\Component\HttpClient\Exception\ClientException
// because it doesn't check the status code of the response
$content = $response->getContent();
// pass FALSE as the optional argument to not throw an exception and return
// instead the original response content (even if it's an error message)
$content = $response->getContent(false);
While responses are lazy, their destructor will always wait for headers to come back. This means that the following request will complete; and if e.g. a 404 is returned, an exception will be thrown:
// because the returned value is not assigned to a variable, the destructor
// of the returned response will be called immediately and will throw if the
// status code is in the 300-599 range
$client->request('POST', 'https://...');
This in turn means that unassigned responses will fallback to synchronous requests. If you want to make these requests concurrent, you can store their corresponding responses in an array:
$responses[] = $client->request('POST', 'https://.../path1');
$responses[] = $client->request('POST', 'https://.../path2');
// ...
// This line will trigger the destructor of all responses stored in the array;
// they will complete concurrently and an exception will be thrown in case a
// status code in the 300-599 range is returned
unset($responses);
This behavior provided at destruction-time is part of the fail-safe design of the component. No errors will be unnoticed: if you don't write the code to handle errors, exceptions will notify you when needed. On the other hand, if you write the error-handling code, you will opt-out from these fallback mechanisms as the destructor won't have anything remaining to do.
There are three types of exceptions:
- Exceptions implementing the :class:`Symfony\\Contracts\\HttpClient\\Exception\\HttpExceptionInterface` are thrown when your code does not handle the status codes in the 300-599 range.
- Exceptions implementing the :class:`Symfony\\Contracts\\HttpClient\\Exception\\TransportExceptionInterface` are thrown when a lower level issue occurs.
- Exceptions implementing the :class:`Symfony\\Contracts\\HttpClient\\Exception\\DecodingExceptionInterface` are thrown when a content-type cannot be decoded to the expected representation.
Thanks to responses being lazy, requests are always managed concurrently. On a fast enough network, the following code makes 379 requests in less than half a second when cURL is used:
$responses = [];
for ($i = 0; $i < 379; ++$i) {
$uri = "https://http2.akamai.com/demo/tile-$i.png";
$responses[] = $client->request('GET', $uri);
}
foreach ($responses as $response) {
$content = $response->getContent();
// ...
}
As you can read in the first "for" loop, requests are issued but are not consumed yet. That's the trick when concurrency is desired: requests should be sent first and be read later on. This will allow the client to monitor all pending requests while your code waits for a specific one, as done in each iteration of the above "foreach" loop.
Note
The maximum number of concurrent requests that you can perform depends on the resources of your machine (e.g. your operating system may limit the number of simultaneous reads of the file that stores the certificates file). Make your requests in batches to avoid these issues.
If you look again at the snippet above, responses are read in requests' order. But maybe the 2nd response came back before the 1st? Fully asynchronous operations require being able to deal with the responses in whatever order they come back.
In order to do so, the stream() method of HTTP clients accepts a list of
responses to monitor. As mentioned :ref:`previously <http-client-streaming-responses>`,
this method yields response chunks as they arrive from the network. By replacing
the "foreach" in the snippet with this one, the code becomes fully async:
foreach ($client->stream($responses) as $response => $chunk) {
if ($chunk->isFirst()) {
// headers of $response just arrived
// $response->getHeaders() is now a non-blocking call
} elseif ($chunk->isLast()) {
// the full content of $response just completed
// $response->getContent() is now a non-blocking call
} else {
// $chunk->getContent() will return a piece
// of the response body that just arrived
}
}
Tip
Use the user_data option combined with $response->getInfo('user_data')
to track the identity of the responses in your foreach loops.
This component allows dealing with both request and response timeouts.
A timeout can happen when e.g. DNS resolution takes too much time, when the TCP
connection cannot be opened in the given time budget, or when the response
content pauses for too long. This can be configured with the timeout request
option:
// A TransportExceptionInterface will be issued if nothing
// happens for 2.5 seconds when accessing from the $response
$response = $client->request('GET', 'https://...', ['timeout' => 2.5]);
The default_socket_timeout PHP ini setting is used if the option is not set.
The option can be overridden by using the 2nd argument of the stream() method.
This allows monitoring several responses at once and applying the timeout to all
of them in a group. If all responses become inactive for the given duration, the
method will yield a special chunk whose isTimeout() will return true:
foreach ($client->stream($responses, 1.5) as $response => $chunk) {
if ($chunk->isTimeout()) {
// $response staled for more than 1.5 seconds
}
}
A timeout is not necessarily an error: you can decide to stream again the response and get remaining contents that might come back in a new timeout, etc.
Tip
Passing 0 as timeout allows monitoring responses in a non-blocking way.
Note
Timeouts control how long one is willing to wait while the HTTP transaction is idle. Big responses can last as long as needed to complete, provided they remain active during the transfer and never pause for longer than specified.
Use the max_duration option to limit the time a full request/response can last.
Network errors (broken pipe, failed DNS resolution, etc.) are thrown as instances of :class:`Symfony\\Contracts\\HttpClient\\Exception\\TransportExceptionInterface`.
First of all, you don't have to deal with them: letting errors bubble to your generic exception-handling stack might be really fine in most use cases.
If you want to handle them, here is what you need to know:
To catch errors, you need to wrap calls to $client->request() but also calls
to any methods of the returned responses. This is because responses are lazy, so
that network errors can happen when calling e.g. getStatusCode() too:
use Symfony\Contracts\HttpClient\Exception\TransportExceptionInterface;
// ...
try {
// both lines can potentially throw
$response = $client->request(...);
$headers = $response->getHeaders();
// ...
} catch (TransportExceptionInterface $e) {
// ...
}
Note
Because $response->getInfo() is non-blocking, it shouldn't throw by design.
When multiplexing responses, you can deal with errors for individual streams by
catching TransportExceptionInterface in the foreach loop:
foreach ($client->stream($responses) as $response => $chunk) {
try {
if ($chunk->isTimeout()) {
// ... decide what to do when a timeout occurs
// if you want to stop a response that timed out, don't miss
// calling $response->cancel() or the destructor of the response
// will try to complete it one more time
} elseif ($chunk->isFirst()) {
// if you want to check the status code, you must do it when the
// first chunk arrived, using $response->getStatusCode();
// not doing so might trigger an HttpExceptionInterface
} elseif ($chunk->isLast()) {
// ... do something with $response
}
} catch (TransportExceptionInterface $e) {
// ...
}
}
This component provides a :class:`Symfony\\Component\\HttpClient\\CachingHttpClient` decorator that allows caching responses and serving them from the local storage for next requests. The implementation leverages the :class:`Symfony\\Component\\HttpKernel\\HttpCache\\HttpCache` class under the hood so that the :doc:`HttpKernel component </components/http_kernel>` needs to be installed in your application:
use Symfony\Component\HttpClient\CachingHttpClient;
use Symfony\Component\HttpClient\HttpClient;
use Symfony\Component\HttpKernel\HttpCache\Store;
$store = new Store('/path/to/cache/storage/');
$client = HttpClient::create();
$client = new CachingHttpClient($client, $store);
// this won't hit the network if the resource is already in the cache
$response = $client->request('GET', 'https://example.com/cacheable-resource');
CachingHttpClient accepts a third argument to set the options of the HttpCache.
.. versionadded:: 5.2
The feature to consume server-sent events was introduced in Symfony 5.2.
Server-sent events is an Internet standard used to push data to web pages.
Its JavaScript API is built around an EventSource object, which listens to
the events sent from some URL. The events are a stream of data (served with the
text/event-stream MIME type) with the following format:
data: This is the first message.
data: This is the second message, it
data: has two lines.
data: This is the third message.
Symfony's HTTP client provides an EventSource implementation to consume these
server-sent events. Use the :class:`Symfony\\Component\\HttpClient\\EventSourceHttpClient`
to wrap your HTTP client, open a connection to a server that responds with a
text/event-stream content type and consume the stream as follows:
use Symfony\Component\HttpClient\Chunk\ServerSentEvent;
use Symfony\Component\HttpClient\EventSourceHttpClient;
// the second optional argument is the reconnection time in seconds (default = 10)
$client = new EventSourceHttpClient($client, 10);
$source = $client->connect('https://localhost:8080/events');
while ($source) {
foreach ($client->stream($source, 2) as $r => $chunk) {
if ($chunk->isTimeout()) {
// ...
continue;
}
if ($chunk->isLast()) {
// ...
return;
}
// this is a special ServerSentEvent chunk holding the pushed message
if ($chunk instanceof ServerSentEvent) {
// do something with the server event ...
}
}
}
The component is interoperable with four different abstractions for HTTP clients: Symfony Contracts, PSR-18, HTTPlug v1/v2 and native PHP streams. If your application uses libraries that need any of them, the component is compatible with all of them. They also benefit from :ref:`autowiring aliases <service-autowiring-alias>` when the :ref:`framework bundle <framework-bundle-configuration>` is used.
If you are writing or maintaining a library that makes HTTP requests, you can decouple it from any specific HTTP client implementations by coding against either Symfony Contracts (recommended), PSR-18 or HTTPlug v2.
The interfaces found in the symfony/http-client-contracts package define
the primary abstractions implemented by the component. Its entry point is the
:class:`Symfony\\Contracts\\HttpClient\\HttpClientInterface`. That's the
interface you need to code against when a client is needed:
use Symfony\Contracts\HttpClient\HttpClientInterface;
class MyApiLayer
{
private $client;
public function __construct(HttpClientInterface $client)
{
$this->client = $client;
}
// [...]
}
All request options mentioned above (e.g. timeout management) are also defined in the wordings of the interface, so that any compliant implementations (like this component) is guaranteed to provide them. That's a major difference with the other abstractions, which provide none related to the transport itself.
Another major feature covered by the Symfony Contracts is async/multiplexing, as described in the previous sections.
This component implements the PSR-18 (HTTP Client) specifications via the
:class:`Symfony\\Component\\HttpClient\\Psr18Client` class, which is an adapter
to turn a Symfony HttpClientInterface into a PSR-18 ClientInterface.
This class also implements the relevant methods of PSR-17 to ease creating
request objects.
To use it, you need the psr/http-client package and a PSR-17 implementation:
# installs the PSR-18 ClientInterface
$ composer require psr/http-client
# installs an efficient implementation of response and stream factories
# with autowiring aliases provided by Symfony Flex
$ composer require nyholm/psr7
# alternatively, install the php-http/discovery package to auto-discover
# any already installed implementations from common vendors:
# composer require php-http/discovery
Now you can make HTTP requests with the PSR-18 client as follows:
.. configuration-block::
.. code-block:: php-symfony
use Psr\Http\Client\ClientInterface;
class Symfony
{
private $client;
public function __construct(ClientInterface $client)
{
$this->client = $client;
}
public function getAvailableVersions(): array
{
$request = $this->client->createRequest('GET', 'https://symfony.com/versions.json');
$response = $this->client->sendRequest($request);
return json_decode($response->getBody()->getContents(), true);
}
}
.. code-block:: php-standalone
use Symfony\Component\HttpClient\Psr18Client;
$client = new Psr18Client();
$request = $client->createRequest('GET', 'https://symfony.com/versions.json');
$response = $client->sendRequest($request);
$content = json_decode($response->getBody()->getContents(), true);
The HTTPlug v1 specification was published before PSR-18 and is superseded by
it. As such, you should not use it in newly written code. The component is still
interoperable with libraries that require it thanks to the
:class:`Symfony\\Component\\HttpClient\\HttplugClient` class. Similarly to
Psr18Client implementing relevant parts of PSR-17, HttplugClient also
implements the factory methods defined in the related php-http/message-factory
package.
# Let's suppose php-http/httplug is already required by the lib you want to use
# installs an efficient implementation of response and stream factories
# with autowiring aliases provided by Symfony Flex
$ composer require nyholm/psr7
# alternatively, install the php-http/discovery package to auto-discover
# any already installed implementations from common vendors:
# composer require php-http/discovery
Let's say you want to instantiate a class with the following constructor, that requires HTTPlug dependencies:
use Http\Client\HttpClient;
use Http\Message\RequestFactory;
use Http\Message\StreamFactory;
class SomeSdk
{
public function __construct(
HttpClient $httpClient,
RequestFactory $requestFactory,
StreamFactory $streamFactory
)
// [...]
}
Because HttplugClient implements the three interfaces, you can use it this way:
use Symfony\Component\HttpClient\HttplugClient; $httpClient = new HttplugClient(); $apiClient = new SomeSdk($httpClient, $httpClient, $httpClient);
If you'd like to work with promises, HttplugClient also implements the
HttpAsyncClient interface. To use it, you need to install the
guzzlehttp/promises package:
$ composer require guzzlehttp/promises
Then you're ready to go:
use Psr\Http\Message\ResponseInterface;
use Symfony\Component\HttpClient\HttplugClient;
$httpClient = new HttplugClient();
$request = $httpClient->createRequest('GET', 'https://my.api.com/');
$promise = $httpClient->sendAsyncRequest($request)
->then(
function (ResponseInterface $response) {
echo 'Got status '.$response->getStatusCode();
return $response;
},
function (\Throwable $exception) {
echo 'Error: '.$exception->getMessage();
throw $exception;
}
);
// after you're done with sending several requests,
// you must wait for them to complete concurrently
// wait for a specific promise to resolve while monitoring them all
$response = $promise->wait();
// wait maximum 1 second for pending promises to resolve
$httpClient->wait(1.0);
// wait for all remaining promises to resolve
$httpClient->wait();
Responses implementing :class:`Symfony\\Contracts\\HttpClient\\ResponseInterface` can be cast to native PHP streams with :method:`Symfony\\Component\\HttpClient\\Response\\StreamWrapper::createResource`. This allows using them where native PHP streams are needed:
use Symfony\Component\HttpClient\HttpClient;
use Symfony\Component\HttpClient\Response\StreamWrapper;
$client = HttpClient::create();
$response = $client->request('GET', 'https://symfony.com/versions.json');
$streamResource = StreamWrapper::createResource($response, $client);
// alternatively and contrary to the previous one, this returns
// a resource that is seekable and potentially stream_select()-able
$streamResource = $response->toStream();
echo stream_get_contents($streamResource); // outputs the content of the response
// later on if you need to, you can access the response from the stream
$response = stream_get_meta_data($streamResource)['wrapper_data']->getResponse();
If you want to extend the behavior of a base HTTP client, you can use :doc:`service decoration </service_container/service_decoration>`:
class MyExtendedHttpClient implements HttpClientInterface
{
private $decoratedClient;
public function __construct(HttpClientInterface $decoratedClient = null)
{
$this->decoratedClient = $decoratedClient ?? HttpClient::create();
}
public function request(string $method, string $url, array $options = []): ResponseInterface
{
// process and/or change the $method, $url and/or $options as needed
$response = $this->decoratedClient->request($method, $url, $options);
// if you call here any method on $response, the HTTP request
// won't be async; see below for a better way
return $response;
}
public function stream($responses, float $timeout = null): ResponseStreamInterface
{
return $this->decoratedClient->stream($responses, $timeout);
}
}
A decorator like this one is useful in cases where processing the requests'
arguments is enough. By decorating the on_progress option, you can
even implement basic monitoring of the response. However, since calling
responses' methods forces synchronous operations, doing so inside request()
will break async.
The solution is to also decorate the response object itself. :class:`Symfony\\Component\\HttpClient\\TraceableHttpClient` and :class:`Symfony\\Component\\HttpClient\\Response\\TraceableResponse` are good examples as a starting point.
.. versionadded:: 5.2
``AsyncDecoratorTrait`` was introduced in Symfony 5.2.
In order to help writing more advanced response processors, the component provides an :class:`Symfony\\Component\\HttpClient\\AsyncDecoratorTrait`. This trait allows processing the stream of chunks as they come back from the network:
class MyExtendedHttpClient implements HttpClientInterface
{
use AsyncDecoratorTrait;
public function request(string $method, string $url, array $options = []): ResponseInterface
{
// process and/or change the $method, $url and/or $options as needed
$passthru = function (ChunkInterface $chunk, AsyncContext $context) {
// do what you want with chunks, e.g. split them
// in smaller chunks, group them, skip some, etc.
yield $chunk;
};
return new AsyncResponse($this->client, $method, $url, $options, $passthru);
}
}
Because the trait already implements a constructor and the stream() method,
you don't need to add them. The request() method should still be defined;
it shall return an
:class:`Symfony\\Component\\HttpClient\\Response\\AsyncResponse`.
The custom processing of chunks should happen in $passthru: this generator
is where you need to write your logic. It will be called for each chunk yielded
by the underlying client. A $passthru that does nothing would just yield
$chunk;. You could also yield a modified chunk, split the chunk into many
ones by yielding several times, or even skip a chunk altogether by issuing a
return; instead of yielding.
In order to control the stream, the chunk passthru receives an :class:`Symfony\\Component\\HttpClient\\Response\\AsyncContext` as second argument. This context object has methods to read the current state of the response. It also allows altering the response stream with methods to create new chunks of content, pause the stream, cancel the stream, change the info of the response, replace the current request by another one or change the chunk passthru itself.
Checking the test cases implemented in :class:`Symfony\\Component\\HttpClient\\Response\\Tests\\AsyncDecoratorTraitTest` might be a good start to get various working examples for a better understanding. Here are the use cases that it simulates:
- retry a failed request;
- send a preflight request, e.g. for authentication needs;
- issue subrequests and include their content in the main response's body.
The logic in :class:`Symfony\\Component\\HttpClient\\Response\\AsyncResponse`
has many safety checks that will throw a LogicException if the chunk
passthru doesn't behave correctly; e.g. if a chunk is yielded after an isLast()
one, or if a content chunk is yielded before an isFirst() one, etc.
This component includes the MockHttpClient and MockResponse classes to
use in tests that shouldn't make actual HTTP requests. Such tests can be
useful, as they will run faster and produce consistent results, since they're
not dependent on an external service. By not making actual HTTP requests there
is no need to worry about the service being online or the request changing
state, for example deleting a resource.
MockHttpClient implements the HttpClientInterface, just like any actual
HTTP client in this component. When you type-hint with HttpClientInterface
your code will accept the real client outside tests, while replacing it with
MockHttpClient in the test.
When the request method is used on MockHttpClient, it will respond with
the supplied MockResponse. There are a few ways to use it, as described
below.
The first way of using MockHttpClient is to pass a list of responses to its
constructor. These will be yielded in order when requests are made:
use Symfony\Component\HttpClient\MockHttpClient;
use Symfony\Component\HttpClient\Response\MockResponse;
$responses = [
new MockResponse($body1, $info1),
new MockResponse($body2, $info2),
];
$client = new MockHttpClient($responses);
// responses are returned in the same order as passed to MockHttpClient
$response1 = $client->request('...'); // returns $responses[0]
$response2 = $client->request('...'); // returns $responses[1]
Another way of using MockHttpClient is to pass a callback that generates the
responses dynamically when it's called:
use Symfony\Component\HttpClient\MockHttpClient;
use Symfony\Component\HttpClient\Response\MockResponse;
$callback = function ($method, $url, $options) {
return new MockResponse('...');
};
$client = new MockHttpClient($callback);
$response = $client->request('...'); // calls $callback to get the response
If you need to test responses with HTTP status codes different than 200,
define the http_code option:
use Symfony\Component\HttpClient\MockHttpClient;
use Symfony\Component\HttpClient\Response\MockResponse;
$client = new MockHttpClient([
new MockResponse('...', ['http_code' => 500]),
new MockResponse('...', ['http_code' => 404]),
]);
$response = $client->request('...');
The responses provided to the mock client don't have to be instances of
MockResponse. Any class implementing ResponseInterface will work (e.g.
$this->createMock(ResponseInterface::class)).
However, using MockResponse allows simulating chunked responses and timeouts:
$body = function () {
yield 'hello';
// empty strings are turned into timeouts so that they are easy to test
yield '';
yield 'world';
};
$mockResponse = new MockResponse($body());
.. versionadded:: 5.2
The feature explained below was introduced in Symfony 5.2.
Finally, you can also create an invokable or iterable class that generates the responses and use it as a callback in functional tests:
namespace App\Tests;
use Symfony\Component\HttpClient\Response\MockResponse;
use Symfony\Contracts\HttpClient\ResponseInterface;
class MockClientCallback
{
public function __invoke(string $method, string $url, array $options = []): ResponseInterface
{
// load a fixture file or generate data
// ...
return new MockResponse($data);
}
}
Then configure Symfony to use your callback:
.. configuration-block::
.. code-block:: yaml
# config/services_test.yaml
services:
# ...
App\Tests\MockClientCallback: ~
# config/packages/test/framework.yaml
framework:
http_client:
mock_response_factory: App\Tests\MockClientCallback
.. code-block:: xml
<!-- config/services_test.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsd="http://www.w3.org/2001/XMLSchema-instance"
xsd:schemaLocation="http://symfony.com/schema/dic/services https://symfony.com/schema/dic/services/services-1.0.xsd">
<services>
<service id="App\Tests\MockClientCallback"/>
</services>
</container>
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client mock-response-factory="App\Tests\MockClientCallback">
<!-- ... -->
</framework-http-client>
</framework:config>
</container>
.. code-block:: php
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->httpClient()
->mockResponseFactory(MockClientCallback::class)
;
};
The MockResponse class comes with some helper methods to test the request:
getRequestMethod()- returns the HTTP method;getRequestUrl()- returns the URL the request would be sent to;getRequestOptions()- returns an array containing other information about the request such as headers, query parameters, body content etc.
Usage example:
$mockResponse = new MockResponse('', ['http_code' => 204]);
$httpClient = new MockHttpClient($mockResponse, 'https://example.com');
$response = $httpClient->request('DELETE', 'api/article/1337', [
'headers' => [
'Accept: */*',
'Authorization: Basic YWxhZGRpbjpvcGVuc2VzYW1l',
],
]);
$mockResponse->getRequestMethod();
// returns "DELETE"
$mockResponse->getRequestUrl();
// returns "https://example.com/api/article/1337"
$mockResponse->getRequestOptions()['headers'];
// returns ["Accept: */*", "Authorization: Basic YWxhZGRpbjpvcGVuc2VzYW1l"]
The following standalone example demonstrates a way to use the HTTP client and test it in a real application:
// ExternalArticleService.php
use Symfony\Contracts\HttpClient\HttpClientInterface;
final class ExternalArticleService
{
private HttpClientInterface $httpClient;
public function __construct(HttpClientInterface $httpClient)
{
$this->httpClient = $httpClient;
}
public function createArticle(array $requestData): array
{
$requestJson = json_encode($requestData, JSON_THROW_ON_ERROR);
$response = $this->httpClient->request('POST', 'api/article', [
'headers' => [
'Content-Type: application/json',
'Accept: application/json',
],
'body' => $requestJson,
]);
if (201 !== $response->getStatusCode()) {
throw new Exception('Response status code is different than expected.');
}
// ... other checks
$responseJson = $response->getContent();
$responseData = json_decode($responseJson, true, 512, JSON_THROW_ON_ERROR);
return $responseData;
}
}
// ExternalArticleServiceTest.php
use PHPUnit\Framework\TestCase;
use Symfony\Component\HttpClient\MockHttpClient;
use Symfony\Component\HttpClient\Response\MockResponse;
final class ExternalArticleServiceTest extends TestCase
{
public function testSubmitData(): void
{
// Arrange
$requestData = ['title' => 'Testing with Symfony HTTP Client'];
$expectedRequestData = json_encode($requestData, JSON_THROW_ON_ERROR);
$expectedResponseData = ['id' => 12345];
$mockResponseJson = json_encode($expectedResponseData, JSON_THROW_ON_ERROR);
$mockResponse = new MockResponse($mockResponseJson, [
'http_code' => 201,
'response_headers' => ['Content-Type: application/json'],
]);
$httpClient = new MockHttpClient($mockResponse, 'https://example.com');
$service = new ExternalArticleService($httpClient);
// Act
$responseData = $service->createArticle($requestData);
// Assert
self::assertSame('POST', $mockResponse->getRequestMethod());
self::assertSame('https://example.com/api/article', $mockResponse->getRequestUrl());
self::assertContains(
'Content-Type: application/json',
$mockResponse->getRequestOptions()['headers']
);
self::assertSame($expectedRequestData, $mockResponse->getRequestOptions()['body']);
self::assertSame($responseData, $expectedResponseData);
}
}