TriLAB.ini

# Print profiles for the TriLAB printers
# based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB

[vendor]
# Vendor name will be shown by the Config Wizard.
name = TriLAB
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.10-slic3r
# Where to get the updates from?
config_update_url = 
#https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:AQI]
name = AzteQ Industrial
variants = 0.4; 0.6
technology = FFF
family = AzteQ
bed_model = aq_bed.stl
bed_texture = aq_bed_texture.svg
default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa);AzteQ Industrial - PC - PolyMax (Polymaker);AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle;AzteQ Industrial - PC/ABS - (Fillamentum);AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle;AzteQ Industrial - PA - Nylon FX256 (Fillamentum);AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle

[printer_model:DQ2]
name = DeltiQ 2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike)

[printer_model:DQ2P]
name = DeltiQ 2 Plus
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike)


[printer_model:DQ2+FP2]
name = DeltiQ 2 + FlexPrint 2
variants = 0.4
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)

[printer_model:DQ2P+FP2]
name = DeltiQ 2 Plus + FlexPrint 2
variants = 0.4
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)

[printer_model:DQ2+FP]
name = DeltiQ 2 + FlexPrint
variants = 0.4
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic

[printer_model:DQ2P+FP]
name = DeltiQ 2 Plus + FlexPrint
variants = 0.4
technology = FFF
family = DeltiQ 2
bed_model = dq2_bed.stl
bed_texture = dq2_bed_texture.svg
default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic

[printer_model:DQM]
name = DeltiQ M
variants = 0.4
technology = FFF
family = DeltiQ
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE

[printer_model:DQL]
name = DeltiQ L
variants = 0.4
technology = FFF
family = DeltiQ
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE

[printer_model:DQXL]
name = DeltiQ XL
variants = 0.4
technology = FFF
family = DeltiQ
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE

# DeltiQ print styles #

[print:DeltiQ 0.20mm Normal]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0.7
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 95%
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 2000
dont_support_bridges = 0
draft_shield = 0
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 60
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
gap_fill_speed = 40
gcode_comments = 0
gcode_label_objects = 0
infill_acceleration = 2000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 60
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode
overhangs_width_speed = 50%
overhangs_width = 75%
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 45
perimeters = 2
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = cost
seam_angle_cost = 30%
seam_travel_cost = 70%
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 2
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 20
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 30
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance_top = 0.1
support_material_contact_distance_bottom = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 4
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 0.6
thin_walls = 0
threads = 12
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
top_solid_layers = 5
top_solid_min_thickness = 0.7
travel_speed = 150
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =

[print:DeltiQ 0.10mm Detail]
inherits = DeltiQ 0.20mm Normal
bottom_solid_layers = 7
bottom_solid_min_thickness = 0.7
bridge_flow_ratio = 70%
bridge_speed = 30
ensure_vertical_shell_thickness = 1
layer_height = 0.1
first_layer_height = 0.2
top_solid_layers = 9
top_solid_min_thickness = 0.7
top_infill_extrusion_width = 0.4
fill_pattern = grid
fill_density = 20%

[print:DeltiQ 0.15mm Normal]
inherits = DeltiQ 0.20mm Normal
bottom_solid_layers = 5
bottom_solid_min_thickness = 0.7
bridge_flow_ratio = 70%
bridge_speed = 30
ensure_vertical_shell_thickness = 1
layer_height = 0.15
first_layer_height = 0.2
top_solid_layers = 7
top_solid_min_thickness = 0.7
fill_pattern = grid
fill_density = 20%

[print:DeltiQ 0.20mm Vase]
inherits = DeltiQ 0.20mm Normal
perimeters = 1
top_solid_layers = 0
fill_density = 0
support_material = 0
spiral_vase = 1
ensure_vertical_shell_thickness = 1
thin_walls = 0

[print:DeltiQ 0.20mm FLEX]
inherits = DeltiQ 0.20mm Normal
avoid_crossing_perimeters = 0
bridge_flow_ratio = 80%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4
extra_perimeters = 1
only_retract_when_crossing_perimeters = 0
extrusion_width = 0.40
overhangs_width_speed = 0
overhangs_width = 0
seam_position = cost
seam_angle_cost = 30%
seam_travel_cost = 70%
thin_walls = 0
bridge_speed = 20
external_perimeter_speed = 20
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
gap_fill_speed = 25
infill_extrusion_width = 0.55
infill_speed = 40
infill_overlap = 27%
perimeter_speed = 25
small_perimeter_speed = 20
solid_infill_speed = 30
solid_infill_extrusion_width = 0.45
support_material_contact_distance_top = 0.3
support_material_contact_distance_bottom = 0.3
support_material_speed = 30
top_solid_infill_speed = 20
top_fill_pattern = rectilinear
fill_pattern = grid
fill_density = 25%
travel_speed = 200
max_print_speed = 40
complete_objects = 1

[print:DeltiQ 0.07mm Quality @0.25 nozzle]
inherits = DeltiQ 0.20mm Normal
bottom_solid_layers = 6
bottom_solid_min_thickness = 0.5
bridge_speed = 60
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.25
external_perimeter_extrusion_width = 0.27
extrusion_width = 0.25
first_layer_extrusion_width = 0.26
first_layer_height = 0.1
infill_extrusion_width = 0.27
infill_overlap = 50%
layer_height = 0.07
overhangs_width_speed = 50%
overhangs_width = 75%
perimeter_extrusion_width = 0.27
perimeters = 5
solid_infill_extrusion_width = 0.27
skirts = 2
support_material_extrusion_width = 0.27
support_material_contact_distance_top = 0.1
support_material_contact_distance_bottom = 0.1
top_infill_extrusion_width = 0.27
top_solid_layers = 6
top_solid_min_thickness = 0.5
thin_walls = 1

[print:DeltiQ 0.20mm Normal @0.25 nozzle]
inherits = DeltiQ 0.07mm Quality @0.25 nozzle
first_layer_height = 0.2
layer_height = 0.2

[print:DeltiQ 0.30mm Normal @0.6 nozzle]
inherits = DeltiQ 0.20mm Normal
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.6
external_perimeter_extrusion_width = 0.68
extrusion_width = 0.65
first_layer_extrusion_width = 0.65
first_layer_height = 0.3
infill_extrusion_width = 0.68
layer_height = 0.3
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance_top = 0.2
support_material_contact_distance_bottom = 0.2
support_material_extrusion_width = 0.55
support_material_interface_spacing = 0.6
support_material_xy_spacing = 0.9
top_infill_extrusion_width = 0.6

[print:DeltiQ 0.30mm Strong @0.6 nozzle]
inherits = DeltiQ 0.30mm Normal @0.6 nozzle
fill_density = 50%
perimeters = 3

[print:DeltiQ 0.35mm Fast @0.6 nozzle]
inherits = DeltiQ 0.30mm Normal @0.6 nozzle
fill_density = 10%
layer_height = 0.35

[print:DeltiQ 0.40mm Normal @0.8 nozzle]
inherits = DeltiQ 0.20mm Normal
bottom_solid_layers = 3
bottom_solid_min_thickness = 1.2
bridge_flow_ratio = 90%
bridge_speed = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.8
external_perimeter_extrusion_width = 0.80
external_perimeter_speed = 30
extrusion_width = 0.80
first_layer_extrusion_width = 0.80
first_layer_height = 0.4
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
gap_fill_speed = 40
infill_extrusion_width = 0.9
infill_overlap = 28%
infill_speed = 60
layer_height = 0.4
max_print_speed = 80
max_volumetric_speed = 40
overhangs_width_speed = 50%
overhangs_width = 75%
perimeter_extrusion_width = 0.80
perimeter_speed = 45
perimeters = 2
small_perimeter_speed = 20
solid_infill_extrusion_width = 0.8
solid_infill_speed = 60
support_material_extrusion_width = 0.8
support_material_contact_distance_top = 0.2
support_material_contact_distance_bottom = 0.2
top_infill_extrusion_width = 0.8
top_solid_infill_speed = 40
top_solid_layers = 4
top_solid_min_thickness = 1.2

[print:DeltiQ 0.40mm Vase @0.8 nozzle]
inherits = DeltiQ 0.40mm Normal @0.8 nozzle
bottom_solid_layers = 4
perimeters = 1
top_solid_layers = 0
fill_density = 0
support_material = 0
spiral_vase = 1
ensure_vertical_shell_thickness = 1
thin_walls = 0

# AzteQ print styles #

[print:AzteQ Industrial 0.20mm Normal]
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0.7
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 95%
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 2000
dont_support_bridges = 0
draft_shield = 0
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 65
extruder_clearance_radius = 65
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
gap_fill_speed = 40
gcode_comments = 0
gcode_label_objects = 0
infill_acceleration = 2000
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 60
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode
overhangs_width_speed = 50%
overhangs_width = 75%
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 45
perimeters = 2
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = cost
seam_angle_cost = 30%
seam_travel_cost = 70%
single_extruder_multi_material_priming = 0
skirt_distance = 10
skirt_height = 2
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 20
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 30
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance_top = 0.1
support_material_contact_distance_bottom = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 4
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 0.6
thin_walls = 0
threads = 12
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
top_solid_layers = 5
top_solid_min_thickness = 0.7
travel_speed = 200
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =

[print:AzteQ Industrial 0.15mm Detail]
inherits = AzteQ Industrial 0.20mm Normal
layer_height = 0.15

[print:AzteQ Industrial 0.20mm Strong]
inherits = AzteQ Industrial 0.20mm Normal
fill_density = 50%
perimeters = 3

[print:AzteQ Industrial 0.20mm Vase]
inherits = AzteQ Industrial 0.20mm Normal
ensure_vertical_shell_thickness = 1
fill_density = 0%
perimeters = 1
spiral_vase = 1
top_solid_layers = 0

[print:AzteQ Industrial 0.25mm Fast]
inherits = AzteQ Industrial 0.20mm Normal
fill_density = 10%
layer_height = 0.25

[print:AzteQ Industrial 0.30mm Normal @0.6 nozzle]
inherits = AzteQ Industrial 0.20mm Normal
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
external_perimeter_extrusion_width = 0.68
extrusion_width = 0.65
first_layer_extrusion_width = 0.65
first_layer_height = 0.3
infill_extrusion_width = 0.68
layer_height = 0.3
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance_top = 0.2
support_material_contact_distance_bottom = 0.2
support_material_extrusion_width = 0.55
support_material_interface_spacing = 0.6
support_material_xy_spacing = 0.9
top_infill_extrusion_width = 0.6

[print:AzteQ Industrial 0.30mm Strong @0.6 nozzle]
inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle
fill_density = 50%
perimeters = 3

[print:AzteQ Industrial 0.35mm Fast @0.6 nozzle]
inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle
fill_density = 10%
layer_height = 0.35

# DeltiQ filaments #

[filament:*DeltiQ common*]
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_colour = #FF0000
filament_diameter = 1.75
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
start_filament_gcode = "; FILAMENT_START_GCODE"
end_filament_gcode = "; FILAMENT_END_GCODE"
filament_vendor = Generic

# DeltiQ PLA filaments #

[filament:DeltiQ - PLA - Generic]
inherits = *DeltiQ common* 
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_cost = 750
filament_density = 1.24
filament_max_volumetric_speed = 8
filament_retract_before_travel = 2
filament_retract_before_wipe = 90%
filament_retract_layer_change = 1
filament_retract_length = 4.0
filament_retract_lift = 0.2
filament_retract_speed = 30
filament_type = PLA
filament_wipe = 1
first_layer_bed_temperature = 55
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 4
temperature = 215

[filament:DeltiQ - PLA - ExtraFill (Fillamentum)]
inherits = DeltiQ - PLA - Generic
filament_cost = 750
filament_density = 1.24
filament_vendor = Fillamentum

[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle]
inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25

[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle]
inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
disable_fan_first_layers = 1
filament_max_volumetric_speed = 40
first_layer_temperature = 230
slowdown_below_layer_time = 8
temperature = 230
filament_retract_layer_change = 0
filament_retract_length = 4.1
filament_retract_speed = 45
filament_deretract_speed = 25

[filament:DeltiQ FP - PLA - Generic]
inherits = DeltiQ - PLA - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.7
filament_retract_speed = 28

[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)]
inherits = DeltiQ FP - PLA - Generic

[filament:DeltiQ FP2 - PLA - Generic]
inherits = DeltiQ FP - PLA - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 1.2
filament_retract_speed = 28

[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)]
inherits = DeltiQ FP2 - PLA - Generic

# DeltiQ PETG filaments #

[filament:DeltiQ - PETG - Generic]
inherits = *DeltiQ common* 
bed_temperature = 80
bridge_fan_speed = 50
cooling = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 480
filament_density = 1.27
filament_deretract_speed = 25
filament_max_volumetric_speed = 8
filament_retract_before_travel = 2
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_speed = 45
filament_type = PET
filament_wipe = 1
first_layer_bed_temperature = 80
first_layer_temperature = 240
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 245

[filament:DeltiQ - PETG (Devil Design)]
inherits = DeltiQ - PETG - Generic
filament_cost = 480
filament_density = 1.27
filament_vendor = DevilDesign

[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle]
inherits = DeltiQ - PETG (Devil Design)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25
first_layer_temperature = 225
temperature = 220
max_fan_speed = 65
min_fan_speed = 40
bridge_fan_speed = 100

[filament:DeltiQ - PETG (Devil Design) @0.6 nozzle]
inherits = DeltiQ - PETG (Devil Design)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle]
inherits = DeltiQ - PETG (Devil Design)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
filament_max_volumetric_speed = 40
first_layer_temperature = 240
slowdown_below_layer_time = 8
temperature = 240
filament_retract_layer_change = 0
filament_retract_length = 4.3
filament_retract_speed = 45
filament_deretract_speed = 25
filament_retract_before_wipe = 80%
filament_wipe = 1

[filament:DeltiQ FP - PETG - Generic]
inherits = DeltiQ - PETG - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.7
filament_retract_speed = 25

[filament:DeltiQ FP - PETG (Devil Design)]
inherits = DeltiQ FP - PETG - Generic

[filament:DeltiQ FP2 - PETG - Generic]
inherits = DeltiQ FP - PETG - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 1.4
filament_retract_speed = 35
filament_retract_before_wipe = 0%

[filament:DeltiQ FP2 - PETG (Devil Design)]
inherits = DeltiQ FP2 - PETG - Generic

# DeltiQ ABS filaments #

[filament:DeltiQ - ABS - Generic]
inherits = *DeltiQ common* 
bed_temperature = 100
bridge_fan_speed = 25
cooling = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 639
filament_density = 1.04
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_speed = 25
filament_type = ABS
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 5
min_print_speed = 10
slowdown_below_layer_time = 15
temperature = 255

[filament:DeltiQ - ABS - ExtraFill (Fillamentum)]
inherits = DeltiQ - ABS - Generic
filament_cost = 639
filament_density = 1.04
filament_vendor = Fillamentum

[filament:DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = DeltiQ - ABS - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:DeltiQ FP - ABS - Generic]
inherits = DeltiQ - ABS - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.7
filament_retract_speed = 25

[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)]
inherits = DeltiQ FP - ABS - Generic

[filament:DeltiQ FP2 - ABS - Generic]
inherits = DeltiQ FP - ABS - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.8
filament_retract_speed = 25

[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)]
inherits = DeltiQ FP2 - ABS - Generic

# DeltiQ ASA filaments #

[filament:DeltiQ - ASA - ExtraFill (Fillamentum)]
inherits = DeltiQ - ABS - Generic
filament_cost = 739
filament_density = 1.07
filament_type = ASA
filament_vendor = Fillamentum
first_layer_temperature = 265
temperature = 265

[filament:DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)]
inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.7
filament_retract_speed = 25

[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)]
inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4

[filament:DeltiQ - ASA - ASA 275 (Spectrum)]
inherits = *DeltiQ common* 
bed_temperature = 55
bridge_fan_speed = 80
cooling = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_vendor = Spectrum
filament_cost = 587
filament_density = 1.07
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.3
filament_retract_speed = 25
filament_type = ASA
filament_wipe = 1
first_layer_bed_temperature = 55
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 15
temperature = 230

[filament:DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle]
inherits = DeltiQ - ASA - ASA 275 (Spectrum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

# DeltiQ CPE filaments #

[filament:DeltiQ - CPE - HG100 (Fillamentum)]
inherits = *DeltiQ common* 
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_vendor = Fillamentum
filament_cost = 1003
filament_density = 1.25
filament_deretract_speed = 25
filament_max_volumetric_speed = 8
filament_retract_before_travel = 2
filament_retract_before_wipe = 70%
filament_retract_layer_change = 0
filament_retract_length = 4.3
filament_retract_lift = 0.2
filament_retract_speed = 45
filament_type = CPE
filament_wipe = 1
first_layer_bed_temperature = 90
first_layer_temperature = 265
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 260

[filament:DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle]
inherits = DeltiQ - CPE - HG100 (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:DeltiQ FP - CPE - HG100 (Fillamentum)]
inherits = DeltiQ - CPE - HG100 (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.7
filament_retract_speed = 25
filament_deretract_speed = 0
filament_retract_before_wipe = 0%

[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)]
inherits = DeltiQ FP - CPE - HG100 (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
filament_retract_length = 0.8
filament_retract_speed = 35
filament_deretract_speed = 0
filament_retract_before_wipe = 0%

# DeltiQ FLEX filaments #

[filament:DeltiQ FP - FLEX - Generic]
inherits = *DeltiQ common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
bed_temperature = 50
bridge_fan_speed = 80
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.07
fan_always_on = 1
fan_below_layer_time = 20
filament_vendor = Generic
filament_cost = 1870
filament_density = 1.22
filament_deretract_speed = nil
filament_max_volumetric_speed = 3.0
filament_retract_before_travel = 2
filament_retract_before_wipe = 70%
filament_retract_layer_change = 0
filament_retract_length = 2.5
filament_retract_lift = 0.2
filament_retract_restart_extra = nil
filament_retract_speed = 20
filament_type = FLEX
filament_wipe = 1
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 4
temperature = 240

[filament:DeltiQ FP2 - FLEX - Generic]
inherits = DeltiQ FP - FLEX - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
bed_temperature = 50
bridge_fan_speed = 80
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.07
fan_always_on = 1
fan_below_layer_time = 20
filament_vendor = Fillamentum
filament_cost = 1870
filament_density = 1.22
filament_deretract_speed = nil
filament_max_volumetric_speed = 3.0
filament_retract_before_travel = 2
filament_retract_before_wipe = 70%
filament_retract_layer_change = 0
filament_retract_length = 2.5
filament_retract_lift = 0.2
filament_retract_restart_extra = nil
filament_retract_speed = 20
filament_type = FLEX
filament_wipe = 1
first_layer_bed_temperature = 50
first_layer_temperature = 225
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 4
temperature = 225

[filament:DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)]
inherits = DeltiQ FP2 - FLEX - Generic
bed_temperature = 50
bridge_fan_speed = 80
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.10
fan_always_on = 1
fan_below_layer_time = 20
filament_vendor = Fillamentum
filament_cost = 1870
filament_density = 1.22
filament_deretract_speed = nil
filament_max_volumetric_speed = 3.0
filament_retract_before_travel = 2
filament_retract_before_wipe = 70%
filament_retract_layer_change = 0
filament_retract_length = 2.5
filament_retract_lift = 0.2
filament_retract_restart_extra = nil
filament_retract_speed = 20
filament_type = TPU92A
filament_wipe = 1
first_layer_bed_temperature = 50
first_layer_temperature = 230
max_fan_speed = 70
min_fan_speed = 50
min_print_speed = 5
slowdown_below_layer_time = 4
temperature = 230

[filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)]
inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)
extrusion_multiplier = 1.10
filament_cost = 1870
filament_density = 1.23
filament_deretract_speed = nil
filament_max_volumetric_speed = 3.0
filament_retract_before_wipe = 70%
filament_retract_length = 2.5
filament_retract_speed = 20
filament_type = TPU98A

[filament:DeltiQ FP2 - TPU 93A (SMARTFIL)]
inherits = DeltiQ FP2 - FLEX - Generic
bed_temperature = 50
bridge_fan_speed = 80
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1.00
fan_always_on = 1
fan_below_layer_time = 10
filament_vendor = Smartfil
filament_cost = 1209
filament_density = 1.21
filament_deretract_speed = nil
filament_max_volumetric_speed = 2.5
filament_retract_before_travel = 2
filament_retract_before_wipe = nil
filament_retract_layer_change = 0
filament_retract_length = 2.9
filament_retract_lift = 0.2
filament_retract_restart_extra = nil
filament_retract_speed = 35
filament_type = TPU93A
filament_wipe = 0
first_layer_bed_temperature = 50
first_layer_temperature = 235
max_fan_speed = 70
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 4
temperature = 235

[filament:DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)]
inherits = DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)
extrusion_multiplier = 1.1
filament_cost = 3578
filament_density = 1.00
filament_max_volumetric_speed = 2.9
filament_retract_length = 0.0
filament_type = PEBA90A
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 2
first_layer_bed_temperature = 75
first_layer_temperature = 245
bed_temperature = 75
temperature = 245

[filament:DeltiQ - PA - Nylon PA12 (Fiberlogy)]
inherits = DeltiQ - ABS - Generic
bed_temperature = 100
filament_cost = 1213
filament_density = 1.02
filament_retract_length = 4.1
filament_type = NYLON
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255

[filament:DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)]
inherits = DeltiQ - ABS - Generic
bed_temperature = 100
filament_cost = 2287
filament_density = 1.08
filament_retract_length = 2.0
filament_type = NYLON
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 50
min_fan_speed = 20
temperature = 255
extrusion_multiplier = 0.95

[filament:DeltiQ - MoldLay (Wax-Alike)]
inherits = DeltiQ - PLA - Generic
bed_temperature = 50
filament_cost = 1951
filament_retract_length = 2.0
filament_type = PLA
first_layer_bed_temperature = 50
first_layer_temperature = 175
max_fan_speed = 70
min_fan_speed = 70
temperature = 175
filament_vendor = Wax-Alike

# AzteQ filaments #

[filament:*AzteQ common*]
inherits = *DeltiQ common* 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4

# AzteQ Industrial filaments #

[filament:AzteQ Industrial (Door Opened) - PLA - Generic]
inherits = *AzteQ common* 
bed_temperature = 50
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 750
filament_density = 1.24
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = 1
first_layer_bed_temperature = 50
first_layer_temperature = 215
full_fan_speed_layer = 0
max_fan_speed = 100
min_fan_speed = 90
min_print_speed = 10
slowdown_below_layer_time = 15
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature"
temperature = 210

[filament:AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle]
inherits = AzteQ Industrial (Door Opened) - PLA - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)]
inherits = AzteQ Industrial (Door Opened) - PLA - Generic
filament_vendor = Fillamentum
filament_cost = 750
filament_density = 1.24

[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)]
inherits = *AzteQ common* 
bed_temperature = 50
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 750
filament_density = 1.24
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 6
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_vendor = Fillamentum
filament_wipe = 1
first_layer_bed_temperature = 50
first_layer_temperature = 220
full_fan_speed_layer = 0
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature"
temperature = 215

[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) 
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - ABS - Generic]
inherits = *AzteQ common* 
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 639
filament_density = 1.04
filament_deretract_speed = nil
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_type = ABS
filament_vendor = Generic
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 255
full_fan_speed_layer = 0
max_fan_speed = 100
min_fan_speed = 80
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
temperature = 255

[filament:AzteQ Industrial - ABS - Generic @0.6 nozzle]
inherits = AzteQ Industrial - ABS - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)]
inherits = AzteQ Industrial - ABS - Generic 
filament_vendor = Fillamentum
filament_cost = 639
filament_density = 1.04

[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - PC/ABS - (Fillamentum)]
inherits = AzteQ Industrial - ABS - Generic 
filament_vendor = Fillamentum
filament_type = PCABS
filament_cost = 1324
filament_density = 1.07
bed_temperature = 100
filament_retract_length = 4.0
first_layer_bed_temperature = 100
first_layer_temperature = 265
max_fan_speed = 50
min_fan_speed = 50
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
temperature = 265
filament_notes = "S180 ; Probing temperature"

[filament:AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial - PC/ABS - (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - PC - PolyMax (Polymaker)]
inherits = AzteQ Industrial - ABS - Generic 
filament_vendor = Polymaker
filament_cost = 1290
filament_density = 1.21
bed_temperature = 100
filament_retract_length = 4.0
first_layer_bed_temperature = 100
first_layer_temperature = 265
max_fan_speed = 50
min_fan_speed = 50
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
temperature = 265
filament_notes = "S180 ; Probing temperature"

[filament:AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle]
inherits = AzteQ Industrial - PC - PolyMax (Polymaker)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - ASA - Generic]
inherits = *AzteQ common* 
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 739
filament_density = 1.07
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_type = ASA
filament_vendor = Generic
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 265
full_fan_speed_layer = 0
max_fan_speed = 75
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature"
temperature = 265

[filament:AzteQ Industrial - ASA - Generic @0.6 nozzle]
inherits = AzteQ Industrial - ASA - Generic
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum)]
inherits = AzteQ Industrial - ASA - Generic
filament_vendor = Fillamentum
first_layer_temperature = 255
temperature = 255
max_fan_speed = 80
min_fan_speed = 60

[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - ASA - Prusament (Prusa)]
inherits = AzteQ Industrial - ASA - Generic
filament_cost = 680
filament_density = 1.07
filament_spool_weight = 0
filament_vendor = Prusa
first_layer_temperature = 260
max_fan_speed = 70
min_fan_speed = 70
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature"
temperature = 260

[filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.6 nozzle]
inherits = AzteQ Industrial - ASA - Prusament (Prusa)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)]
inherits = *AzteQ common* 
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 1212
filament_density = 1.02
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = NYLON
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Fiberlogy
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 255
full_fan_speed_layer = 0
max_fan_speed = 75
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature"
temperature = 255

[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle]
inherits = AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15

[filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum)]
inherits = *AzteQ common* 
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 1565
filament_density = 1.01
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 6.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = NYLON
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Fillamentum
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 255
full_fan_speed_layer = 0
max_fan_speed = 85
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S60 ; Set and wait - chamber temperature"
temperature = 255

[filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle]
inherits = AzteQ Industrial - PA - Nylon FX256 (Fillamentum)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15


[filament:AzteQ Industrial - PC Blend - Prusament (Prusa)]
inherits = *AzteQ common* 
bed_temperature = 100
bridge_fan_speed = 75
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_cost = 1156
filament_density = 1.22
filament_deretract_speed = nil
filament_max_volumetric_speed = 8
filament_retract_before_travel = 3
filament_retract_before_wipe = 70%
filament_retract_layer_change = 1
filament_retract_length = 4.1
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 25
filament_soluble = 0
filament_spool_weight = 0
filament_type = PC
filament_vendor = Prusa
filament_wipe = 1
first_layer_bed_temperature = 100
first_layer_temperature = 270
full_fan_speed_layer = 0
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
temperature = 270
filament_notes = "S180 ; Probing temperature"

[filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.6 nozzle]
inherits = AzteQ Industrial - PC Blend - Prusament (Prusa)
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15



# DeltiQ Printer #

[printer:*DeltiQ*]
inherits = 
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "DeltiQ PLA"
default_print_profile = DeltiQ 0.20mm Normal
deretract_speed = 0
end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning
extra_loading_move = -2
extruder_colour = #FF0000
extruder_offset = 0x0
gcode_flavor = repetier
layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
max_layer_height = 0.25
max_print_height = 300
min_layer_height = 0.15
nozzle_diameter = 0.4
parking_pos_retraction = 92
printer_model = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
printer_settings_id = 
printer_variant = 
printer_vendor = TriLAB Group s.r.o.
remaining_times = 0
retract_before_travel = 3
retract_before_wipe = 100%
retract_layer_change = 1
retract_length = 4.0
retract_length_toolchange = 10
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
thumbnails = 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
wipe = 1
z_offset = 0

[printer:DeltiQ L]
inherits = *DeltiQ*
printer_model = DQL
printer_variant = 0.4
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
max_print_height = 300

[printer:DeltiQ M]
inherits = *DeltiQ*
printer_variant = 0.4
bed_shape = 89.507x9.40756,88.0333x18.7121,85.5951x27.8115,82.2191x36.6063,77.9423x45,72.8115x52.9007,66.883x60.2218,60.2218x66.883,52.9007x72.8115,45x77.9423,36.6063x82.2191,27.8115x85.5951,18.7121x88.0333,9.40756x89.507,2.54949e-014x90,-9.40756x89.507,-18.7121x88.0333,-27.8115x85.5951,-36.6063x82.2191,-45x77.9423,-52.9007x72.8115,-60.2218x66.883,-66.883x60.2218,-72.8115x52.9007,-77.9423x45,-82.2191x36.6063,-85.5951x27.8115,-88.0333x18.7121,-89.507x9.40756,-90x5.09899e-014,-89.507x-9.40756,-88.0333x-18.7121,-85.5951x-27.8115,-82.2191x-36.6063,-77.9423x-45,-72.8115x-52.9007,-66.883x-60.2218,-60.2218x-66.883,-52.9007x-72.8115,-45x-77.9423,-36.6063x-82.2191,-27.8115x-85.5951,-18.7121x-88.0333,-9.40756x-89.507,-1.65327e-014x-90,9.40756x-89.507,18.7121x-88.0333,27.8115x-85.5951,36.6063x-82.2191,45x-77.9423,52.9007x-72.8115,60.2218x-66.883,66.883x-60.2218,72.8115x-52.9007,77.9423x-45,82.2191x-36.6063,85.5951x-27.8115,88.0333x-18.7121,89.507x-9.40756,90x-1.0198e-013
max_print_height = 230
printer_model = DQM
retract_length = 3.7
retract_length_toolchange = 10
retract_speed = 30
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder

[printer:DeltiQ XL]
inherits = *DeltiQ*
printer_model = DQXL
printer_variant = 0.4
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
max_print_height = 500
retract_length = 4.5
retract_speed = 35

[printer:*DeltiQ 2*]
inherits = *DeltiQ*
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100  ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
gcode_flavor = reprapfirmware
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
pause_print_gcode = M0
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2

[printer:DeltiQ 2]
inherits = *DeltiQ 2*
printer_model = DQ2
printer_variant = 0.4
max_print_height = 300

[printer:DeltiQ 2 - 0.25 nozzle]
inherits = DeltiQ 2
printer_variant = 0.25
max_layer_height = 0.15
min_layer_height = 0.07
nozzle_diameter = 0.25
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle"
default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle

[printer:DeltiQ 2 - 0.6 nozzle]
inherits = DeltiQ 2
printer_variant = 0.6
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.6
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle

[printer:DeltiQ 2 - 0.8 nozzle]
inherits = DeltiQ 2
printer_variant = 0.8
max_layer_height = 0.6
min_layer_height = 0.3
nozzle_diameter = 0.8
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle

[printer:DeltiQ 2 Plus]
inherits = *DeltiQ 2*
printer_model = DQ2P
printer_variant = 0.4
max_print_height = 500

[printer:DeltiQ 2 Plus - 0.25 nozzle]
inherits = DeltiQ 2 Plus
printer_variant = 0.25
max_layer_height = 0.15
min_layer_height = 0.07
nozzle_diameter = 0.25
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle"
default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle

[printer:DeltiQ 2 Plus - 0.6 nozzle]
inherits = DeltiQ 2 Plus
printer_variant = 0.6
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.6
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle

[printer:DeltiQ 2 Plus - 0.8 nozzle]
inherits = DeltiQ 2 Plus
printer_variant = 0.8
max_layer_height = 0.6
min_layer_height = 0.3
nozzle_diameter = 0.8
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle

[printer:*DeltiQ 2 FlexPrint*]
inherits = *DeltiQ 2*
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
default_print_profile = DeltiQ 0.20mm FLEX
default_filament_profile = "DeltiQ FP2 - FLEX - Generic"
retract_length = 0.7
retract_speed = 25
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1

[printer:DeltiQ 2 + FlexPrint]
inherits = *DeltiQ 2 FlexPrint*
printer_model = DQ2+FP
printer_variant = 0.4
max_print_height = 300

[printer:DeltiQ 2 Plus + FlexPrint]
inherits = *DeltiQ 2 FlexPrint*
printer_model = DQ2P+FP
printer_variant = 0.4
max_print_height = 500

[printer:*DeltiQ 2 FlexPrint 2*]
inherits = *DeltiQ 2 FlexPrint*
default_filament_profile = "DeltiQ FP2 - FLEX - Generic"
retract_length = 0.8
retract_speed = 25
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2

[printer:DeltiQ 2 + FlexPrint 2]
inherits = *DeltiQ 2 FlexPrint 2*
printer_model = DQ2+FP2
printer_variant = 0.4
max_print_height = 300

[printer:DeltiQ 2 Plus + FlexPrint 2]
inherits = *DeltiQ 2 FlexPrint 2*
printer_model = DQ2P+FP2
printer_variant = 0.4
max_print_height = 500

[printer:*AzteQ*]
inherits = *DeltiQ 2*
max_print_height = 400
bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed heater\nM141 S0 ; Turn off chamber heater\nM104 S0 ; Turn off hotend heater\n\nG28 ; Home all axes\n\nM107 ; Turn off layer fan\n\nG90 ; Absolute positioning for motion\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5 ; Disable motor hold
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQI
retract_before_travel = 3
retract_before_wipe = 100%
retract_layer_change = 1
retract_length = 4
retract_length_toolchange = 10
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nM140 S[first_layer_bed_temperature] ; Set and continue - bed temperature\nM104 S150 ; Set and continue - hotend probing temperature\n[start_filament_gcode]\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM109 [filament_notes] ; Set and wait for material specific hotend probing temperature\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S{first_layer_temperature+extruder_temperature_offset} ; Set and continue - printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder
wipe = 1

[printer:AzteQ Industrial]
inherits = *AzteQ*
printer_model = AQI
printer_variant = 0.4
max_print_height = 400
default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)"
default_print_profile = AzteQ Industrial 0.30mm Normal

[printer:AzteQ Industrial - 0.6 nozzle]
inherits = AzteQ Industrial
printer_variant = 0.6
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.6
default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle"
default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle

[presets]
print = DeltiQ 0.20mm Normal
printer = DeltiQ 2
filament = DeltiQ - PLA - Generic