programmers_guide.md

Programmer's Guide

There are in general only two software controllable functions in the clock manager.

Transactional Clock Hints

To enable a transactional clock, set the corresponding hint in CLK_HINTS to 1. To disable a transactional clock, set the corresponding hint in CLK_HINTS to 0. Note, a 0 does not indicate clock is actually disabled, software can thus check CLK_HINTS_STATUS for the actual state of the clock.

Peripheral Clock Controls

To control peripheral clocks, directly change the bits in CLK_ENABLES.

Device Interface Functions (DIFs)

• Device Interface Functions

Register Table

• Register Table