Skip to content

Latest commit

 

History

History
87 lines (59 loc) · 3.92 KB

Readme.md

File metadata and controls

87 lines (59 loc) · 3.92 KB
Raw

node-red-contrib-johnny-five

A set of input and output nodes for controlling General Purpose Input and Outputs (GPIOs) though the use of johnny-five I/O Plugins as well as running johnny-five scripts!

Install via NPM

From inside your node-red directory:

npm install node-red-contrib-johnny-five

Control I/O for Analog, Digital, PWM and Servos

input output

Also Read and Write to i2c devices

i2c

Node configuration

  • 14 is the length of bytes to read (1 byte = 8 bits)
  • i2c bytes is an array of bytes. You can't use inject node directly because data has to be inside an array.
msg.payload=[0x00]
return msg;
  • i2c read and i2c write configure i2c connection. I2c and register are decimal values! parseInt(x, 10) function is used to read values.

Now with full Johnny-five support!

j5node

Supported Hardware

node-red-contrib-johnny-five supports several johnny-five I/O classes:

Device IO Plugin
Arduino/Firmata firmata
Raspberry Pi raspi-io
BeagleBone Black, Green, Pocket beaglebone-io
C.H.I.P. chip-io
Galileo/Edison galileo-io
Blend Micro blend-micro-io
LightBlue Bean bean-io
ble-io(esp32, curie) ble-io
Circuit Playground(classic) playground-io
Electirc Imp imp-io
Particle(Spark) Core particle-io

Arduino is supported out of the box, but for other devices, you'll need to install their IO plugin.

For example to install the Raspberry Pi plugin:

npm install raspi-io

Remote Arduino Support

If you're using Arduino/Firmata, you can connect to a remote device via a raw tcp socket, or an MQTT connection.

For example, if you wanted to connect using tcp, in node-red you could specify an ip and port. On another machine with an Arduino plugged in you could run a server that relays a tcp socket to a serial port such as: tcpSerialRelay.js

If you wanted to connect an Arduino to an MQTT server you can use a script such as: bindSerialToMQTT.js. In node-red you can connect to the same MQTT server and subscribe to the topic the arduino is publishing on, while publishing to the topic that the arduino is subscribed to.

License

MIT

Copyright (c) 2019 Sebastian Raff
Copyright (c) 2015 Luis Montes

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.