conf.ini

; PLEASE READ
; Date: 2024-01-23, raven
; conf.ini with all maxed settings for modern machines.
; Read comments and adjust as needed.
;
; IT IS RECOMMENDED TO EDIT GRAPHICS VALUES HERE INSTEAD OF THE UI
; as some options are not available through the UI
;
; If having bad performance, reduce to the following settings first, in
; order of importance:
;   Effects=1
;   Forest=2
;   NumChannels=2
;
; More info:
; https://github.com/IL2HorusTeam/il2fb-ds-config
; https://il2horusteam.github.io/il2fb-ds-config/

; https://www.airgroup51.net/forum/index.php?topic=295.0
; https://www.mission4today.com/index.php?name=Knowledge_Base&cat=7
;
[il2]
title=Il2-Sturmovik 1946
hotkeys=HotKey game

[window]
width=2560
height=1440
; the optimum spotting resolution is something like 1920x1080
;width=1920
;height=1080
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=0
FullScreen=1
DrawIfNotFocused=1
EnableResize=0
EnableClose=1
SaveAspect=0
WideScreenFoV=1
UIColor=1
UIDetail=0
UIBackground=rnd
; Use3Renders and Use3RendersUI are for using 3 monitors at once:
Use3Renders=0
Use3RendersUI=0

[GLPROVIDER]
; The game has 2 renders, opengl (native) and directx8 (done via a wrapper to opengl)
; It is recommended to use opengl
GL=Opengl32.dll
[GLPROVIDERS]
Open GL=Opengl32.dll
DirectX=dx8wrap.dll

[NET]
; speed: server throughput in byes/sec
;   3000=modem 28800, 5000=modem56000, 25000=DSL cable
;   min: 300, max 1000000
speed=25000

routeChannels=0

; localHost: address of network interface to listen for all incoming connections
;   emtpy value: listen to all interfaces
localHost=

; localPort: UDP port number for client to connect to
; min: 1000, max 65000, default: 21000
localPort=21000

; socks related settings:
socksHost=
socksPort=
socksUser=
socksPwd=

; default server to connect to:
remotePort=21946
remoteHost=wildfeuer.ddns.net

; other servers:
remoteHost_000=il2org.ru:21000
remoteHost_001=162.142.42.32:21000
remoteHost_002=152.117.102.53:21000
remoteHost_003=95.107.40.202:21000
remoteHost_004=95.107.40.202:21001
remoteHost_005=il2org.ru:21001
remoteHost_006=il2org.ru:21002
remoteHost_007=mv-game-03.myvariety.net:21000
remoteHost_008=il2.com.ru:21001
remoteHost_009=il2-shturmovik.ru:21000
remoteHost_010=il2com.ru:21000
remoteHost_011=il2.com.ru:21002
remoteHost_012=185.42.61.26:21000
remoteHost_013=185.42.61.26:21001
remoteHost_014=217.78.176.50:21000
remoteHost_015=wildfeuer.ddns.net:21946


serverName=No Name
serverDescription=
; serverChannels: max number of users, min 1, max 128
serverChannels=127

; online score table filtering:
;   allows sever to hide certain details about players. Those shown with S by default
;   `USER STAT` on console will not work either
disableNetStatStatistics=0

showPilotNumber=1
showPilotPing=1
showPilotName=1
showPilotScore=1
showTeamScore=0
cumulativeTeamScore=0
showPilotArmy=1
showPilotACDesignation=1
showPilotACType=1

; checkRuntime: as server, force client-side verification
;   checkRuntime=0  no check is made (default)
;   checkRuntime=1  quick check
;   checkRuntime=2  comprehensive check
;   NOTE: during the comprehensive check, if the client runs a different OS version from the client,
;   the check may identify the OS differences as changes in game modules
checkRuntime=0

; Max allowed difference in time between server and client (protection from
; SpeedHack-like cheats). This may especially happen when the connection quality
; is low and connectivity errors occur. This may also happen if the hardware
; malfunctions, such as overheating of the computer timer causing frequency
; changes.
; float, min 0.01 (1%), default 0.2 (20%)
checkTimeSpeedDifferense=0.2

; enable speedhack protections at server side
checkServerTimeSpeed=1
; enable speedhack protections at client side
checkClientTimeSpeed=0

; checkTimeSpeedInterval
;   Max allowed time period when time difference can exceed
;   checkTimeSpeedDifferense value. Client will be disconnected from the server
;   kafter this period.
;   Type:	integer
;   Min:	1
;   Max:	1000
;   Default:	17
checkTimeSpeedInterval=17

; difficulty:
;   use difficulty editor to understand values
;   http://il2horusteam.github.io/il2fb-difficulty/
; example: difficulty=8796093022207

; SkinDownload:  users to see skins which aren't present on server
SkinDownload=1

; allowMorseAsText: online clients are allowed to use Morse as text
allowMorseAsText=1

; allowCustomSounds: allow to use custom sounds in my_presets and my_samples dirs
allowCustomSounds=1

; filterUserNames:
;   as server, filter out all non-latin and non-cyrillic chars from players name and callsign
filterUserNames=0

; refly params
;   allows server to disable refly button for predefined duration, or lives
;   reflyDisabled:
;     disable refly button until next mision. Default 0
;     reflyDisabled=0
;   reflyKIADelay:
;     Initial penalty (delay in seconds) for refly after death. Default 0
;     reflyKIADelay=0
;   reflyKIADelayMultiplier: default 0.0
;     Number of seconds, which will be multiplied by number of users's deaths and
;     added to initial penalty for refly after death. So, final penalty is following:
;     calculation penalty is as follows:
;     refly penalty = reflyKIADelay + (KIA count * reflyKIADelayMultiplier)
;     reflyKIADelayMultiplier=0.0
;    maxAllowedKIA:
;     limits of deaths per mission. default -1 (no limit)
;     maxAllowedKIA=-1


[MaxLag]
; this section is about "cheating has been detected" messages

; farMaxLagTime
;   Defines the maximum delay (in seconds) between packets received from a given
;   client. A time greater than this is considered a warp.
;   Min:	value of nearMaxLagTime
;   Max:	30.0
;   Default:	10.0
farMaxLagTime=10.0

; nearMaxLagTime:
;   Defines the max lag time allowed for an aircraft in an endangered position
;   before it is considered warping (cheating). This is meant to address players who
;   are lagging on purpose.
;   Min:	0.1
;   Max:	30.0
;   Default:	2.0
nearMaxLagTime=2.0

; cheaterWarningDelay
;   Defines the maximum amount of time the system will refrain from taking
;   action against a player acting out of bounds. This can be used to avoid issuing
;   multiple warnings for a single glitch.
;   Min:	1.0
;   Max:	30.0
;   Default:	10.0
cheaterWarningDelay=5.0

; cheaterWarningNum
;   Defines the max number of warnings issued before a player is autokicked by
;   the host. A value of -1 prevents autokicking.
;   Default:	3
cheaterWarningNum=-1

[chat]
region=(dx=0.39140624,dy=0.16527778,x=0.0,y=-0.004166667)
adr0=ALL
adr1=MY_ARMY
msg0=hi!
msg1=<obj<blue
msg2=<obj<red
msg3=<nextmap
msg4=<vote\u0020yes
msg5=<vote\u0020no
msg6=<help

; autoLogDetail:
;   Amount of events users will see in chat message.
;   0 	Minimum of events (e.g., user joined, user left, user is cheating).
;   1 	More events, including kills, crashes, captures and so on.
;   2 	More events, including destruction of ground units.
;   3 	All events, including different kinds of damages.
;   Type:	integer
;   Min:	0
;   Max:	3
;   Default:	3

[game]
Arcade=0
HighGore=0

; situation of the minimap. Can be moved with mouse button
mapPadX=1.0036458
mapPadY=0.35347223

mapPadMode=1
mapZoomMode=0
mapWheelMode=0
viewSet=56
Intro=0
NoSubTitles=0
SubTitlesLines=4
NoChatter=0
NoHudLog=0
NoLensFlare=0

; iconTypes: type of HUD-icons
;   0=off, 1=distance, 2=distance+PlayerName, 3=distance+Aircraft+PlayerName
;   recommendation: 0 (full real) or 3 (unless server has activated icons)
iconTypes=3

; mp_dotrange [FRIENDLY|FOE] [DEFAULT] [COLOR] [DOT] [RANGE] [TYPE] [ID] [NAME]
;
; The following keys define the distance at which the appropriate icon is enabled:
;  COLOR: The distance at which icons take the color of the inbound plane’s army. Icons farther away will be drawn in grey.
;  DOT: The distance at which the “dot� plane marker becomes visible.
;  RANGE: The distance at which the distance measurement appears in the icon.
;  TYPE: The distance at which the airplane model or model family becomes visible.
;  ID: The distance at which the tactical number is visible.
;  NAME: The distance at which the aircraft’s pilot name is visible (if it is driven by a human pilot).
;
; This setting is set in Users/icons
;
; mp_dotrange DEFAULT restores the Pacific Fighters predefined icon setup.
; mp_dotrange run without parameters prints the current icon setup ranges (which may be issued by both client and server).
;
; Example:
;  mp_dotrange FRIENDLY COLOR 0.1 DOT 15 RANGE 5 TYPE 0.1 ID 0.1 NAME 2.5
;  This will give you friendly info at Aircraft dot at 15km range at 5km Pilot name 2.5km all other at 100metres

eventlog=eventlog.lst
eventlogkeep=0
eventlogHouse=0

3dgunners=1
ScreenshotType=1
RecordingIndicator=0
MapAlpha=0.68
SaveTrk=0
SkipParatrooperViews=0

NoMissionInfoHud=0
noKillInfoHud=0
lowInfoHud=1

; BlockMorseChat: don't hear morse beeps sent by players by typing `Morse: foo` in chat
BlockMorseChat=0
ShowMorseAsText=1

IconUnits=0
SmallMapWPLabels=0

; TypeClouds:
;  0=standard clouds
;  1=improved quality clouds
;  Note: when online, the player will see the cloud type set by the server
TypeClouds=1

Mouse6DOFMove=0
DebugFM=0
hudMode=1

[HotKey game]
PrintScreen=ScreenShot
P=pause
Pause=pause
[HotKey gui]
Escape=activate
[HookViewFly Config]
; timeFirstStep: time until the aircraft crosses the flyby camera
timeFirstStep=3.0
; deltaZ: angle of the flyby camera to the plane
deltaZ=10.0
[HookView]
MouseLeft=Len
[HookView Config]
YawSpeed=0.1
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6

; LeanF: speed of head forward/backward motion, range 0.01 to 1
LeanF=1
; LeanS: speed of head sideways motion, range 0.01 to 1
LeanS=1
; Raise: speed of head up/down motion, range 0.01 to 1
Raise=1
; RubberBand: elasticity of the head motion limits
RubberBand=1.0

[HotKey builder]
; hotkey assignments when using the mission builder

MouseLeft=objectMove
MouseRight=popupmenu
; freeView: view In 3D mode, so at that location allows a free pivoting point of view.
;   Useful if you want to look at the placement of objects
Enter=freeView
; worldZoom: free zoom function for a selected area
Shift MouseLeft=worldZoom

; Alt + mouse: draw a box for selection/deselection
Alt MouseLeft=select+
Alt MouseRight=select-

; copy, cut, paste objects in selection
Ctrl C=mis_copy
Ctrl X=mis_cut
Ctrl V=mis_paste

Alt Ctrl=unselect
PageDown=change+
PageUp=change-
End=change++
Home=change--
Ctrl MouseLeft=insert+
Ctrl MouseRight=delete+
Insert=insert+
NumPad-0=insert+
; F: used in the "destruction" mode area to highlight the chosen degree of destruction
F=fill
NumPad.=delete+
Delete=delete+
Backspace=cursor
Tab=cursor
; land: hides the landscape, only airports and clouds visible
F10=land
F11=onLand
NumPad-=normalLand
NumPad+=toLand
; use num keypad to rotate objects:
NumPad-5=resetAngles
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-4=stepAzimut-15
NumPad-1=stepAzimut-30
NumPad-9=stepAzimut5
NumPad-6=stepAzimut15
NumPad-3=stepAzimut30

[MouseXYZ]
F1=SpeedSlow
F2=SpeedNormal
F3=SpeedFast
MouseRight=XYmove
F4 MouseRight=Zmove
MouseMiddle=Amove
F5 MouseRight=Amove
F6 MouseRight=Tmove
F7 MouseRight=Kmove
[MouseXYZ Config]
RealTime=1

[HotKey Console]
Shift Tab=Activate
[Console]
HISTORY=1024
HISTORYCMD=1024
LOAD=console.cmd
SAVE=console.cmd
LOG=0
LOGTIME=0
LOGFILE=log.lst
LOGKEEP=0
LOGDEBUG=0
; console commands:
; START SHOW to display fps
; CmdUser show user info

[sound]
SoundUse=1
SoundEngine=1

; Speakers:
;   0=Default, 1=Headphones, 2=Desktop speakers, 3=Quadraphonic, 4=Surround
Speakers=1

; Placement:
;   0=Default, 1=Small, 2=Narrow, 3=Wide
Placement=0

MasterVolume=10
ObjectVolume=3
Attenuation=7
VoiceVolume=5

; music settings:
MusicVolume=0
MusState.takeoff=1
MusState.inflight=1
MusState.crash=1
MusFlags.play=1

; SoundMode: 3d mode
;   0=Standard, 1=minimal, 2=balanced, 3=full
SoundMode=1

; SamplingRate:
;   0=Standard, 1=22 050 Hz, 2=44100 Hz
SamplingRate=2

; NumChannels:
;   0=Default
;   1=8
;   2=16 Best for quality vs. performance
;   3=32 Beware of performance hit!
NumChannels=3

; EAX (SoundExt* is EAX-specific settings)
; SoundFlags.hardware: enable EAX 1/2/3/4
;   recommended to use openalsoft dlls for EAX support
SoundFlags.hardware=1
SoundFlags.forceEAX1=0
; SoundExt.volumefx: disable eax reverb to workaround openal-soft bug
;   see https://github.com/kcat/dsoal/issues/93
SoundExt.volumefx=0
SoundExt.acoustics=1
SoundExt.extrender=1
; SoundExt.occlusions: cockpit cushions external sounds
SoundExt.occlusions=1

SoundFlags.streams=1
SoundFlags.duplex=1
SoundFlags.reversestereo=0
Channels=2
SoundSetupId=8

SoundFlags.voicemgr=1
SoundFlags.static=1
SoundFlags.bugscorrect=0
ActivationLevel=0.02
Preemphasis=0.85
RadioLatency=0.5
AGC=1
PTTMode=1
SoundFlags.UseRadioChatter=1
SoundFlags.AutoActivation=0
RadioFlags.Enabled=1
RadioEngine=2
RadioFlags.PTTMode=1
RadioFlags.PlayClicks=1
ActLevel=0
MicLevel=13

[rts]
; ProcessAffinityMask:
;   1: use core 1 (default). Better fps and less stuttering
;   2: use core 2
;   3: use core 1 and 2
;ProcessAffinityMask=1

mouseUse=2
joyUse=1
trackIRUse=1
DisableIME=0
locale=us
UseSmartAxis=0
JoyProfile=1

; joyTick=100, miliseconds, new in 4.14.1
; 44 Hz is 6.94ms , 120Hz is 8.3ms. 5ms seems enough
joyTick=5

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
SensitivityZ=1.0
Invert=0

[rts_joystick]
; config of first joystick axis. These appear in UI -> controls -> input
; For each axis there are 12 values, the first describes the size of the zero zone
; (values 0-50), the last of the strength of the filtering (0-100). The 10
; represent values in between the linearity of the stick movement in 10% values.
; (Each 0-100) all these values are 100, then the stick movement 100% linear. If
; the first on "10," IL2 response in 10% Stickauslenkung with 10% from 10% Ruderauslenkung.
;
; Only the values of the axes of the first controller in the Windows Game
; Controller menu can be changed with the hardware setup. You start with a
; prominent first The lines starting with 1X1, 1Y1, 1RX1, 1RZ1 etc., stand for the
; axes of the input device with ID 2 Are still connected to other game
; controllers, there are the rows 1X2, 1Y2, 1RX2, 1RZ2 etc., for the Windows ID3
; and ongoing. However, these are modifiable only through the conf.ini.

; all the bars must be up (100) in UI to have a flat curve for that axis
X=0 100 100 100 100 100 100 100 100 100 100 0 0
Y=0 100 100 100 100 100 100 100 100 100 100 0 0
Z=0 100 100 100 100 100 100 100 100 100 100 0 0
RZ=0 100 100 100 100 100 100 100 100 100 100 0 0
; FF: force feedback
FF=0
U=0 100 100 100 100 100 100 100 100 100 100 0 0
V=0 100 100 100 100 100 100 100 100 100 100 0 0
1X=0 100 100 100 100 100 100 100 100 100 100 0 0
1Y=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=0 100 100 100 100 100 100 100 100 100 100 0 0
1U=0 100 100 100 100 100 100 100 100 100 100 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
1X1=0 10 20 30 40 50 60 70 80 90 100 0 0
1Y1=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0 2
1RX1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ1=0 100 100 100 100 100 100 100 100 100 100 0 0
1U1=0 100 100 100 100 100 100 100 100 100 100 0 0
1V1=0 100 100 100 100 100 100 100 100 100 100 0 0

[rts_joystick1]
1X=0 100 100 100 100 100 100 100 100 100 100 0 0
1Y=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ=0 100 100 100 100 100 100 100 100 100 100 0 0
1U=0 100 100 100 100 100 100 100 100 100 100 0 0
1V=0 100 100 100 100 100 100 100 100 100 100 0 0
FF=0
1X1=0 100 100 100 100 100 100 100 100 100 100 0 0
1Y1=0 100 100 100 100 100 100 100 100 100 100 0 0
1Z1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RX1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RY1=0 100 100 100 100 100 100 100 100 100 100 0 0
1RZ1=0 100 100 100 100 100 100 100 100 100 100 0 0
1U1=0 100 100 100 100 100 100 100 100 100 100 0 0
1V1=0 100 100 100 100 100 100 100 100 100 100 0 0

[Render_OpenGL]
; TexQual:
;   3=Normal Textures, 2=smaller textures to a factor of 2, 1=factor of 4 smaller textures
;   0=factor of 8 smaller textures
;   at low texture memory of graphics card (16MB or less) should see an improvement.
;   use of option 1 or 0 in today's newer graphics cards is unlikely due to the amount of RAM they now use.
TexQual=3

; TexMipFilter:
;   0=None
;   1=Bilinear (fastest)
;   2=Trilinear (Improves quality with little sacrifice in speed)
;   3=anisotrophic (Best quality but slower)
TexMipFilter=3

; TexCompress:
;   0=No compression best quality
;   1=16bit conversion
;   2=S3TC compression, best performance with little worse texture quality
TexCompress=0
; TextFlags.TexCompressARBExt must be activated if S3TC compression is used
TexFlags.TexCompressARBExt=0

; TexFlags.UseDither: smooth transitions in 16-bit color depth
TexFlags.UseDither=0

TexFlags.UseAlpha=0
TexFlags.UseIndex=0

; TexFlags.PolygonStipple:
;   emulated shadow transparency in stencil buffer disabled (disabled if StencilBits = 0 under [window])
TexFlags.PolygonStipple=1

; TexFlags.UseClampedSprites: limit polygon count
TexFlags.UseClampedSprites=0

; TexFlags.DrawLandByTriangles: representation of the landscape surface in simple triangle geometry
TexFlags.DrawLandByTriangles=0

; TexFlags.UseVertexArrays: geometry calculation of the objects on Vertex Arrays
TexFlags.UseVertexArrays=1
TexFlags.VertexArrayExt=1

; TexFlags.DisableAPIExtensions: disable extensions of the video driver
TexFlags.DisableAPIExtensions=0

TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1

; TexFlags.SecondaryColorExt: at 0=multiple effects disappear, 1=two-dimensional clouds
TexFlags.SecondaryColorExt=1

TexFlags.ClipHintExt=1
TexFlags.UsePaletteExt=1

; TexFlags.TexAnisotropicExt: mipmaps are filtered specifically
;   0=filter mipmaps faster but with lower quality
;   1=best quality
;   Impact of this option is closely linked to TexMipFilter
TexFlags.TexAnisotropicExt=1

TexFlags.TexEnvCombineDot3=1
TexFlags.SeparateSpecular=1

TexFlags.TextureShaderNV=0
TexFlags.DepthClampNV=0
TexFlags.TexEnvCombine4NV=0

; HardwareShaders must be 1 to activate "perfect" mode
HardwareShaders=1
ForceShaders1x=0

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1

; MeshDetail: Level of Detail objects in play
;   0=lego-like, 1=log, 2=normal
MeshDetail=2

VisibilityDistance=3

; Sky: representation of clouds
;   0=no clouds (only available offline)
;   1=less clouds
;   2=normal clouds
Sky=2

; Forest: 1,2,3. for option 3, needs HardwareShaders=1
Forest=3

; Water:
;   Water=0 Water with flat geometry (fastest).
;   Water=1 Water with flat geometry (fast).
;   Water=2 This mode is visually similar to water = 3 but it runs on ATI cards 9800, X800, X1800 and later models.
;   Water=3 Fast render mode with Vertex Shaders 3.0 (NVIDIA 6600 and later models)
;   Water=4 Better quality mode with Vertex Shaders 3.0 (NVIDIA 6800 and later models)
Water=2

; Effects:
;   Effects=0 effects without shadows
;   Effects=1 effects with shadows
;   Effects=2 improved effects ligthing, needs 3.0+ Mhz CPU
Effects=2

; LandShading: detail of landscape lighting
;   3=building shadows
LandShading=3

LandDetails=2

; LandGeom: 2=normal visibility, 3=improved visibility
;   3 is not performance-optimized, and works only in graphics mode "perfect"
LandGeom=3

; CountryDetails: soil textures of ground are more diverse
CountryDetails=2

; TexLarge: high-resolution airplane textures. 0=off, 1=on
TexLarge=1

TexLandQual=3
TexLandLarge=1

; VideoSetupId:
;   0 Safe Settings
;   1 Default Settings
;   2 Maximum Settings
;   3 NVidia GeForce 6800/6600/FX/4/3
;   4 NVidia GeForce 5200..5900  1.x Shaders
;   5 NVidia GeForce 4MX
;   6 NVidia GeForce 2 GTS/MX/256
;   7 NVidia Riva TNT2
;   8 ATI Radeon X800/9800/9700/9600/9500
;   9 ATI Radeon 8500/9000
;   10 ATI Radeon
;   11 Intel 915/925 (GMA900)
;   12 Kyro II
;   13 Matrox G400
;   14 3dfx Voodoo 3
;   15 3dfx Voodoo 5
;   16 S3 Savage 4
;   17 Custom
VideoSetupId=17

; If you experience flickering airfields/roads when viewed from high altitude,
; add these two lines into the OpenGL section to fix the issue:
;   PolygonOffsetFactor=-0.15
;   PolygonOffsetUnits=-3.0
PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0

[DGen]
; Dynamic Campaign settings. Not added by default, use to alter campaigns
;NoBadWeather=1
;  either 0 or 1
;MissionDistance=50
;  from 10 to 200 Kilometers, depends on the map and targets available.
;  It is not guaranteed that there will be suitable targets in this distance
;NoAirfieldHighlight=1
;  Set to 1 or 0. Zero meaning you’ll have AAA/flak unit at some unused airbases
;RandomFlights=0
;  Can be set to 0 to 5 Random flights are flights not related to your mission,
;  both friendly and enemy are just incidental you may or may not see these flights,
;  they might not get close enough
;  Default or not having the line in conf.ini is average (3). Can affect frame rates.
;MaxFLAK=5
;  Can be set to 0 to 100, default or not having the line in conf.ini is 10.
;  Can affect frame rates. Affects the amount of flak generated from your airfield to target,
;  so can affect frame rates very much.
;AirIntensity=Low
;  Settings are low, medium and high. Default or not having the line in conf.ini
;  is medium. Sets the number of flights, enemy and friendly, that are related to
;  your mission. On low setting, there will be no random flights and it will
;  override the "RandomFlights=" setting in that case, ( see above ). Can
;  dramatically affect frame rates.
;GroundIntensity=Low
;  Settings are low, medium or high. On low, you'll only have ground objects around
;  target or active airfields. Default is medium (or not having the line in
;  conf.ini ) and there will also be extra objects around your flight route,
;  besides target area and active airfields. High gives you extra targets of
;  opportunity to and from your home field. Can dramatically affect frame rates.
;Maxbomberskill=1
;  Settings are 0, 1, 2 and 3, ( for rookie, average, veteran and ace ) and default or not
;  having this line in conf.ini, the AI bomber gunners will be kind of random or depend on
;  other settings like CampaignAI=. This limits the entire bomber skill ( not just the gunners )
;  to a lower level if preferred, so you can attack bombers more easily if you limit it to a low setting.
;  It affects only enemy AI for bombers, not friendly. Unfortunately, this does nothing for transport aircraft
;  such as LI-2, C-47 or JU-52, so be careful around those and don’t assume they will be limited like the bombers
;  if you set this to a low setting!!! Sometimes FW-200 Condor can also sometimes be assigned as a
;  transport plane in some maps, so watch it!!!!
;CampaignMissions=Hard
;  Settings are easy, normal or hard. Default or not having the line in conf.ini is
;  normal. This changes the scripts ( ops files, I.E. - ops41-E.dat, where "E",
;  means easy ) files in the Dgen folder used to generate missions. Affects the
;  number of enemy planes encoutered as opposed to the number of friendly planes in
;  your group/s. For example, set on easy, you might have a mission generated which
;  gives you four fighters on your side with four bombers, and two enemy fighters
;  will later show up to intercept your bombers. The very same mission on hard
;  might give you only two fighters on your side, maybe the same number of bombers
;  to escort, but you'll run into four enemy fighters to deal with!! This balances
;  out so it does not affect frame rate much, if at all.
;CampaignAI=Hard
;  Settings are easy, normal or hard. Default or not having the line in conf.ini is
;  normal. Increases enemy and friendly AI by a factor of one. Low increases
;  friendly AI level higher while lowering enemy AI level. High does the opposite.
;  Normal gives you a more even match of AI strength.
;CampaignLength=Short
;  VeryShort, Short, Medium, Long, VeryLong (VeryLong is default)
;CampaignDifficulty=Hard
;  Easy settings will add one level to all friendly groups and decrease enemy experience
;OperationVictory=100
;  In Pacific Fighters dynamic campaigns the player’s actions influence the outcome
;  of individual operations as well as the whole war. The system works by assigning a
;  static number of points to each target destroyed, and calculating a total number of points
;  for each side. If your side destroys enemy targets, points are added to your side’s tally.
;  If your side’s targets are destroyed by the enemy, the points are subtracted from your side’s tally..
;  Each side is assigned a predetermined number of points which in each operation means a
;  historical outcome (victory or defeat). If the operation’s tally does not match the historical outcome,
;  an alternative briefing is triggered which may mean a defeat for the side that historically won,
;  or vice versa.For example, if you want mission outcome to always be historical,
;  you can set the parameters to unachievable high values, such as:
;  OperationDefeat=-100
;  OperationVictory=3000
;  WarVictory=1000
;  OperationDefeat=-3000
;  WarDefeat=-1000
;  WarVictory=30000
;  WarDefeat=-30000
;  Default value for an operation outcome is 100 points (added if it’s a victory, subtracted if it’s a defeat).
;  War outcome’s value is 1,000 points By reducing the numbers you can make your contributions matter much more in the overall war effort.
;  The following point values are used
;  Carrier=100 points
;  Other ship=20 points
;  Plane=5 points
;  Tank=3 points
;  All other targets=1 point
;  The tallies are recalculated after each mission, and they’re checked at the end of each operation.
;UseParachutes=1
;  japanese have chutes from start of war
;PromotionRate=n.n
;  Influences the rate of player promotion during a DGen campaign.
;  Settings are 0.0 - 1.0 with the value being a percentage of promotion rate. Default is 1.0 (100%).
;  The default rate can be unrealistically high, rapidly promoting the player to the maximum rank
;  if they are doing well, even before the longer DGen campaigns are half-completed.
;  This is particularly true for those who start their campaigns from the third rank or higher.
;  0.2 - 0.3 is an ideal range for a more realistic rate of promotion and this should raise a
;  good performing player to the maximum rank near the end of a longer DGen campaign.
;UseParkedPlanes=1
;  places will be equipped with parked aircraft
;NoAirfieldHighlight=1
;  0 means that more seats be equipped with Flak

HistoricalRanks=1
CampaignLength=Medium
AirIntensity=high
GroundIntensity=high
RandomFlights=5
; CampaignMissions=Hard
; CampaignAI=Hard
; CampaignDifficulty=Hard
UseAsuraDGen=0

[Mods]
; Ultrapack options:
; make mouselook behave like in vanilla:
; UPFollowInertiaEnabled=0
; UPExternalInertiaEnabled=0
;
FOVAnim=1
FOVMin=5
FOVMax=175
; FOVSpeed:
; 200 means 2x:
FOVSpeed=200
FOVDefault=70
FOVLog=0
Stabs4All=0
NewTrackIR=1
AutoNtrk=0
Darkness=9
Diffuse=9
EventLogFlushTimeout=1000
LogFlushTimeout=1000
UPCockpitInertiaEnabled=0
UPCockpitInertiaValue=0.075
UPGunnerInertiaEnabled=0
UPGunnerInertiaValue=0.01
UPFollowInertiaEnabled=0
UPFollowInertiaPositionValue=0.01
UPFollowInertiaAngleValue=0.01
UPExternalIntertiaEnabled=1
UPExternalIntertiaValue=0.075
UPExternalTrackIREnabled=1
UPGameMenuStatusBar=1
UPGameMenuShowFPS=0
6dof_usezoom=0
6dof_usezoomc6=0
6dof_gfactor=1.0
6dof_tfactor=1.0
InstantLog=2
HighSpeedNet=1
AddDefaultCountryNone=0
useNetLogin=0
netLogin=
useNetLoginUser=0
netLoginUser=
; useNetCallsign allows you to use a different name than you have for your ingame pilot
useNetCallsign=1
;netCallsign=grey raven
SkinDownloadNotifications=1

; ngHUD mod (if installed)
; https://www.sas1946.com/main/index.php?topic=58163.0
;
; In order to enjoy all features of this mod as intended enable/disable the settings below:
;   Game settings (can be activated/deactivated anytime during a mission):
;     (ENABLE) Setup > Mis Settings > HUD > Show Subtitles
;     (ENABLE) Setup > Mis Settings > HUD > Show HUD Log
;   Mission/Campaign difficulty settings (cannot be changed during a mission/campaign):
;     (DISABLE) Difficulty > Views > No Speed Bar
;     Deactivate it to get all NG-HUD features! Otherwise you will get a 'light' version of NG-HUD
; This is a list of controls you will use often to interact with the HUD:
;  Toggle Speed Bar (International units / Imperial in knots / US Customary)
;  Toggle Icon Types (AI icons: Range + Type + Callsign)
;  Toggle Taxing Guide Line (Taxi to runway virtual aid)
;  Toggle Map (Mini map + NG-HUD Navigation aids)
;  Toggle Comms (Orders + NG-HUD Aircraft info)
;  Pause Game (Pause + Mission info)

;ngHUDposition=0,0,0,0
; Adjust HUD elements position in pixels
; (from left, from bottom, from right, from top)
; - Allowed values: Any positive number
; - Default value: 0,0,0,0
; (previous entries ngHUDleft, ngHUDbottom, ngHUDright, ngHUDtop are now obsolete)
;
; ngHUDsector=1
; Enable/disable the sector coordinates in the Speed Bar
; [Views > No Speed Bar] difficulty setting must be off
; - Allowed values: 1 (enabled) or 0 (disabled)
; - Default value: 1
;
; ngHUDsubtitles=8
; Set maximum number of subtitle lines to be displayed
; [HUD > Show Subtitles] misc setting must be on
; - Allowed values: 1 to 15
; - Default value: 8
;
; ngHUDmaptime=0
; Display the "time menu" when the map is on
; (useful for testing missions and online play)
; - Allowed values: 1 (yes) or 0 (no)
; - Default value: 0
;
; ngHUDpause=0
; Pause the game on mission start (offline only)
; - Allowed values: 1 (yes) or 0 (no)
; - Default value: 0
;
; ngHUDfpsbar=0
; Show/hide the FPS counter at the top of the screen
; - Allowed values: 1 (show) or 0 (hide)
; - Default value: 0
;
; ngHUDlogbottom=1
; Set the position of the log at the bottom or in the middle of the screen
; [HUD > Show HUD Log] misc setting must be on
; - Allowed values: 1 (bottom) or 0 (middle)
; - Default value: 1
; (Previous entry lowInfoHud is now obsolete)
;
; ngHUDloglines=3
; Set maximum number of log lines to be displayed
; [HUD > Show HUD Log] misc setting must be on
; - Allowed values: 1 to 10
; - Default value: 3
;
; ngHUDshiftmsg=5
; Main messages (excluding "Mission Complete", etc) exceeding X characters will
; be displayed at the bottom of the screen instead of in the middle
; - Allowed values: Any number from 0 to 100
; - Default value: 5 (shift to the bottom messages with more than 5 characters)
ngHUDposition=0,0,0,0
ngHUDsector=1
ngHUDsubtitles=8
ngHUDmaptime=0
ngHUDpause=0
ngHUDfpsbar=0
ngHUDlogbottom=1
ngHUDloglines=3
ngHUDshiftmsg=5

[DeviceLink]
; DeviceLink is used to export telemetry. Was used for external applications ala
; IL-2 Dials, like udpspeed. More info in DeviceLink.txt
;port=21100
;host=127.0.0.1
;IPS=127.0.0.1 192.168.0.10