Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[BUG] symbol lookup error _ZN9libcamera8controls3rpi11ScalerCropsE again #741

Open
arsatyants opened this issue Nov 3, 2024 · 3 comments
Open

[BUG] symbol lookup error _ZN9libcamera8controls3rpi11ScalerCropsE again #741

arsatyants opened this issue Nov 3, 2024 · 3 comments

Comments

@arsatyants
Copy link

rpicam-apps Bug Report

Date: 04-11-2024 (01:11:15)
Command: ./camera-bug-report

Hardware information

** hostname **
pi5

** cat /proc/cpuinfo **
processor : 0
BogoMIPS : 108.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0b
CPU revision : 1

processor : 1
BogoMIPS : 108.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0b
CPU revision : 1

processor : 2
BogoMIPS : 108.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0b
CPU revision : 1

processor : 3
BogoMIPS : 108.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0b
CPU revision : 1

Revision : d04170
Serial : eecd602356a24b7c
Model : Raspberry Pi 5 Model B Rev 1.0

Configuration

** cat /boot/firmware/cmdline.txt **
console=serial0,115200 console=tty1 root=PARTUUID=458b983b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=UA
** cat /boot/firmware/config.txt **

For more options and information see

http://rptl.io/configtxt

Some settings may impact device functionality. See link above for details

Uncomment some or all of these to enable the optional hardware interfaces

#dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on

Enable audio (loads snd_bcm2835)

dtparam=audio=on

Additional overlays and parameters are documented

/boot/firmware/overlays/README

Automatically load overlays for detected cameras

camera_auto_detect=1
gpu_mem=128
start_x=1

Automatically load overlays for detected DSI displays

display_auto_detect=1

Automatically load initramfs files, if found

auto_initramfs=1

Enable DRM VC4 V3D driver

dtoverlay=vc4-kms-v3d
max_framebuffers=2

Don't have the firmware create an initial video= setting in cmdline.txt.

Use the kernel's default instead.

disable_fw_kms_setup=1

Run in 64-bit mode

arm_64bit=1

Disable compensation for displays with overscan

disable_overscan=1

Run as fast as firmware / board allows

arm_boost=1

[cm4]

Enable host mode on the 2711 built-in XHCI USB controller.

This line should be removed if the legacy DWC2 controller is required

(e.g. for USB device mode) or if USB support is not required.

otg_mode=1

[all]

dtparam=uart0=on
dtparam=pciex1_gen=3

Logs

** dmesg **
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.6.51+rpt-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd165e0..0x000000003fd16617 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376
[ 0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:27:01:47 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=458b983b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=UA
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Memory: 7890880K/8380416K available (13440K kernel code, 2224K rwdata, 4304K rodata, 5056K init, 1213K bss, 161856K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43243 entries in 43 pages
[ 0.000000] ftrace: allocated 43 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000155] Console: colour dummy device 80x25
[ 0.000159] printk: console [tty1] enabled
[ 0.000329] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000337] pid_max: default: 32768 minimum: 301
[ 0.000361] LSM: initializing lsm=capability,integrity
[ 0.000419] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000440] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000764] cgroup: Disabling memory control group subsystem
[ 0.001151] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001180] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001199] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001255] rcu: Hierarchical SRCU implementation.
[ 0.001259] rcu: Max phase no-delay instances is 1000.
[ 0.001854] EFI services will not be available.
[ 0.001927] smp: Bringing up secondary CPUs ...
[ 0.002078] Detected PIPT I-cache on CPU1
[ 0.002121] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002300] Detected PIPT I-cache on CPU2
[ 0.002333] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002500] Detected PIPT I-cache on CPU3
[ 0.002529] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.002555] smp: Brought up 1 node, 4 CPUs
[ 0.002573] SMP: Total of 4 processors activated.
[ 0.002578] CPU features: detected: 32-bit EL0 Support
[ 0.002582] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.002586] CPU features: detected: Common not Private translations
[ 0.002590] CPU features: detected: CRC32 instructions
[ 0.002595] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.002598] CPU features: detected: LSE atomic instructions
[ 0.002602] CPU features: detected: Privileged Access Never
[ 0.002605] CPU features: detected: RAS Extension Support
[ 0.002609] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.002645] CPU: All CPU(s) started at EL2
[ 0.002648] alternatives: applying system-wide alternatives
[ 0.004328] devtmpfs: initialized
[ 0.007187] Enabled cp15_barrier support
[ 0.007198] Enabled setend support
[ 0.007248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.007257] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[ 0.008128] pinctrl core: initialized pinctrl subsystem
[ 0.008280] DMI not present or invalid.
[ 0.008453] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.009025] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.009073] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.009122] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.009142] audit: initializing netlink subsys (disabled)
[ 0.009196] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.009317] thermal_sys: Registered thermal governor 'step_wise'
[ 0.009329] cpuidle: using governor menu
[ 0.009387] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.009416] ASID allocator initialised with 32768 entries
[ 0.009723] Serial: AMBA PL011 UART driver
[ 0.010720] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.011062] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.011076] printk: console [ttyAMA10] enabled
[ 0.757865] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-10-21T14:27:49, variant start_cd
[ 0.771921] raspberrypi-firmware soc:firmware: Firmware hash is 951e1cc900000000000000000000000000000000
[ 0.788051] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.795137] Modules: 0 pages in range for non-PLT usage
[ 0.795139] Modules: 129408 pages in range for PLT usage
[ 0.804892] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.817828] iommu: Default domain type: Translated
[ 0.822643] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.828948] SCSI subsystem initialized
[ 0.832741] usbcore: registered new interface driver usbfs
[ 0.838255] usbcore: registered new interface driver hub
[ 0.843597] usbcore: registered new device driver usb
[ 0.848750] pps_core: LinuxPPS API ver. 1 registered
[ 0.853733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.862906] PTP clock support registered
[ 0.867095] vgaarb: loaded
[ 0.869894] clocksource: Switched to clocksource arch_sys_counter
[ 0.876151] VFS: Disk quotas dquot_6.6.0
[ 0.885905] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.893010] FS-Cache: Loaded
[ 0.895926] CacheFiles: Loaded
[ 0.900482] NET: Registered PF_INET protocol family
[ 0.905511] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[ 0.915493] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
[ 0.924098] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[ 0.931876] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
[ 0.940093] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
[ 0.949101] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.955764] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
[ 0.963430] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.970343] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.977739] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.983553] RPC: Registered named UNIX socket transport module.
[ 0.989498] RPC: Registered udp transport module.
[ 0.994217] RPC: Registered tcp transport module.
[ 0.998936] RPC: Registered tcp-with-tls transport module.
[ 1.004440] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.010913] PCI: CLS 0 bytes, default 64
[ 1.014903] Trying to unpack rootfs image as initramfs...
[ 1.029965] kvm [1]: IPA Size Limit: 40 bits
[ 1.034333] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 1.043131] kvm [1]: vgic interrupt IRQ9
[ 1.047089] kvm [1]: VHE mode initialized successfully
[ 1.096753] Initialise system trusted keyrings
[ 1.101336] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.107839] zbud: loaded
[ 1.110626] NFS: Registering the id_resolver key type
[ 1.115721] Key type id_resolver registered
[ 1.119924] Key type id_legacy registered
[ 1.123961] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.130696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.138199] F2FS not supported on PAGE_SIZE(16384) != 4096
[ 1.143777] Key type asymmetric registered
[ 1.147899] Asymmetric key parser 'x509' registered
[ 1.152818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.160325] io scheduler mq-deadline registered
[ 1.164879] io scheduler kyber registered
[ 1.168929] io scheduler bfq registered
[ 1.173140] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
[ 1.182421] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
[ 1.190196] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
[ 1.197984] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
[ 1.205778] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
[ 1.214954] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
[ 1.224230] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[ 1.232921] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 1.244000] Console: switching to colour frame buffer device 240x67
[ 1.252038] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[ 1.257501] Freeing initrd memory: 17872K
[ 1.293939] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.300681] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 1.311321] serial serial0: tty port ttyS0 registered
[ 1.316744] iproc-rng200 107d208000.rng: hwrng registered
[ 1.322229] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 1.330779] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 1.339749] brd: module loaded
[ 1.344070] loop: module loaded
[ 1.347347] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.354719] Loading iSCSI transport class v2.0-870.
[ 1.360466] usbcore: registered new device driver r8152-cfgselector
[ 1.366777] usbcore: registered new interface driver r8152
[ 1.372300] usbcore: registered new interface driver lan78xx
[ 1.378001] usbcore: registered new interface driver smsc95xx
[ 1.383832] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.389629] dwc_otg: FIQ enabled
[ 1.389630] dwc_otg: NAK holdoff enabled
[ 1.389632] dwc_otg: FIQ split-transaction FSM enabled
[ 1.389634] Module dwc_common_port init
[ 1.389760] usbcore: registered new interface driver uas
[ 1.395108] usbcore: registered new interface driver usb-storage
[ 1.401256] mousedev: PS/2 mouse device common for all mice
[ 1.415249] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 1.421676] rpi-rtc soc:rpi_rtc: setting system clock to 2024-11-03T23:05:02 UTC (1730675102)
[ 1.430593] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 1.437159] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.445948] sdhci: Secure Digital Host Controller Interface driver
[ 1.452162] sdhci: Copyright(c) Pierre Ossman
[ 1.456577] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.462443] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.468524] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.475008] hid: raw HID events driver (C) Jiri Kosina
[ 1.480188] usbcore: registered new interface driver usbhid
[ 1.485787] usbhid: USB HID core driver
[ 1.489962] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 1.498542] NET: Registered PF_PACKET protocol family
[ 1.503645] Key type dns_resolver registered
[ 1.513158] registered taskstats version 1
[ 1.517346] Loading compiled-in X.509 certificates
[ 1.524755] Key type .fscrypt registered
[ 1.529156] Key type fscrypt-provisioning registered
[ 1.535775] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 1.543244] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 1.552816] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 1.561581] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 1.570346] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.580282] brcm-pcie 1000110000.pcie: Forcing gen 3
[ 1.585931] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 1.592851] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.598806] pci_bus 0000:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 1.609828] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 1.621473] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 1.627978] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.634813] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.749899] brcm-pcie 1000110000.pcie: link up, 8.0 GT/s PCIe x1 (!SSC)
[ 1.757001] pci 0000:01:00.0: [1e60:2864] type 00 class 0x0b4000
[ 1.763489] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit pref]
[ 1.771191] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[ 1.778885] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 1.786633] pci 0000:01:00.0: PME# supported from D3hot
[ 1.792345] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 1.817915] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.825007] pci 0000:00:00.0: BAR 9: assigned [mem 0x1800000000-0x18000fffff 64bit pref]
[ 1.833578] pci 0000:01:00.0: BAR 0: assigned [mem 0x1800000000-0x1800003fff 64bit pref]
[ 1.842150] pci 0000:01:00.0: BAR 4: assigned [mem 0x1800004000-0x1800007fff 64bit pref]
[ 1.850714] pci 0000:01:00.0: BAR 2: assigned [mem 0x1800008000-0x1800008fff 64bit pref]
[ 1.859277] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.864685] pci 0000:00:00.0: bridge window [mem 0x1800000000-0x18000fffff 64bit pref]
[ 1.873231] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 1.882132] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 1.891078] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.897645] pcieport 0000:00:00.0: PME: Signaling with IRQ 38
[ 1.903893] pcieport 0000:00:00.0: AER: enabled with IRQ 38
[ 1.910010] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 1.917416] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 1.926921] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 1.935635] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 1.944353] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 1.953065] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.962843] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 1.968268] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 1.975144] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 1.981061] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 1.992049] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 2.003655] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 2.010124] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 2.016899] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.129897] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 2.136976] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 2.143438] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 2.150154] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 2.156864] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 2.163632] pci 0001:01:00.0: supports D1
[ 2.168059] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.185905] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.192963] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 2.200536] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 2.208104] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 2.215669] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 2.223231] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 2.228607] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 2.236172] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.245053] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.253984] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 2.260531] pcieport 0001:00:00.0: PME: Signaling with IRQ 39
[ 2.266759] pcieport 0001:00:00.0: AER: enabled with IRQ 39
[ 2.272823] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 2.282326] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 2.291998] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 2.298952] rp1 0001:01:00.0: chip_id 0x20001927
[ 2.308980] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 101
[ 2.338794] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (2c:cf:67:27:01:47)
[ 2.350068] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 2.359039] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.364533] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 2.372641] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.382066] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000
[ 2.388315] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.393794] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 2.401467] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 2.408045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.416769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.424432] usb usb1: Product: xHCI Host Controller
[ 2.429726] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[ 2.436678] usb usb1: SerialNumber: xhci-hcd.0
[ 2.441654] hub 1-0:1.0: USB hub found
[ 2.445830] hub 1-0:1.0: 2 ports detected
[ 2.450388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.459108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.466770] usb usb2: Product: xHCI Host Controller
[ 2.472067] usb usb2: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[ 2.479100] usb usb2: SerialNumber: xhci-hcd.0
[ 2.484055] hub 2-0:1.0: USB hub found
[ 2.488234] hub 2-0:1.0: 1 port detected
[ 2.492851] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.498444] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 2.506536] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.516052] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000
[ 2.522293] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.527773] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 2.535542] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 2.542116] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.550937] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.558604] usb usb3: Product: xHCI Host Controller
[ 2.563909] usb usb3: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[ 2.570975] usb usb3: SerialNumber: xhci-hcd.1
[ 2.575933] hub 3-0:1.0: USB hub found
[ 2.580108] hub 3-0:1.0: 2 ports detected
[ 2.584651] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.593462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.601143] usb usb4: Product: xHCI Host Controller
[ 2.606559] usb usb4: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[ 2.613519] usb usb4: SerialNumber: xhci-hcd.1
[ 2.618482] hub 4-0:1.0: USB hub found
[ 2.622758] hub 4-0:1.0: 1 port detected
[ 2.627765] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.636532] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.645098] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.653582] platform 1000800000.codec: Adding to iommu group 0
[ 2.659972] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.668619] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.677352] platform 1000880000.pisp_be: Adding to iommu group 0
[ 2.683822] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.692207] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.700695] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 2.708299] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.717134] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 2.724924] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 2.732624] platform axi:gpu: Adding to iommu group 1
[ 2.738242] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 2.745762] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 2.753273] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.762151] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 2.769627] pl011-axi 1f00030000.serial: cts_event_workaround enabled
[ 2.770193] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 2.776838] mmc1: CQHCI version 5.10
[ 2.776956] 1f00030000.serial: ttyAMA0 at MMIO 0x1f00030000 (irq = 126, base_baud = 0) is a PL011 AXI
[ 2.796650] of_cfs_init
[ 2.799536] of_cfs_init: OK
[ 2.802816] clk: Disabling unused clocks
[ 2.831378] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 2.853902] usb 3-2: new full-speed USB device number 2 using xhci-hcd
[ 2.940938] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[ 2.948193] mmcblk0: mmc0:0001 SD128 117 GiB
[ 2.954152] mmcblk0: p1 p2
[ 2.957444] mmcblk0: mmc0:0001 SD128 117 GiB
[ 2.984439] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 2.995344] Freeing unused kernel memory: 5056K
[ 3.000369] Run /init as init process
[ 3.004452] with arguments:
[ 3.004454] /init
[ 3.004455] with environment:
[ 3.004456] HOME=/
[ 3.004458] TERM=linux
[ 3.029927] usb 3-2: New USB device found, idVendor=25a7, idProduct=fa23, bcdDevice= 2.41
[ 3.038633] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.046271] usb 3-2: Product: 2.4G Receiver
[ 3.052095] usb 3-2: Manufacturer: Compx
[ 3.057284] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 3.102251] input: Compx 2.4G Receiver as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:25A7:FA23.0001/input/input0
[ 3.132773] input: pwr_button as /devices/platform/pwr_button/input/input1
[ 3.167775] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 3.184757] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 3.261997] hid-generic 0003:25A7:FA23.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-xhci-hcd.1-2/input0
[ 3.294174] input: Compx 2.4G Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:25A7:FA23.0002/input/input2
[ 3.309222] input: Compx 2.4G Receiver as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:25A7:FA23.0002/input/input3
[ 3.323735] input: Compx 2.4G Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:25A7:FA23.0002/input/input4
[ 3.397953] input: Compx 2.4G Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:25A7:FA23.0002/input/input5
[ 3.413797] hid-generic 0003:25A7:FA23.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-xhci-hcd.1-2/input1
[ 3.487993] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[ 3.499071] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 3.506996] Console: switching to colour dummy device 80x25
[ 3.514958] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 3.523135] Registered IR keymap rc-cec
[ 3.527035] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[ 3.534362] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input7
[ 3.542732] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input8
[ 3.551909] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 3.560247] Registered IR keymap rc-cec
[ 3.564133] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[ 3.571441] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input9
[ 3.580315] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input10
[ 3.589599] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 3.596726] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 3.603616] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 3.610762] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 3.618335] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 3.674472] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[ 3.760741] Console: switching to colour frame buffer device 480x135
[ 3.790239] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 3.835610] uart-pl011 107d001000.serial: no DMA platform data
[ 4.041641] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none.
[ 4.698752] NET: Registered PF_INET6 protocol family
[ 4.704188] Segment Routing with IPv6
[ 4.707882] In-situ OAM (IOAM) with IPv6
[ 4.745954] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.778856] systemd[1]: Detected architecture arm64.
[ 4.788224] systemd[1]: Hostname set to .
[ 5.165415] systemd[1]: Queued start job for default target graphical.target.
[ 5.198910] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 5.206812] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 5.217575] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 5.229264] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 5.240852] systemd[1]: Created slice user.slice - User and Session Slice.
[ 5.250451] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 5.263918] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 5.279206] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-458b983b\x2d01.device - /dev/disk/by-partuuid/458b983b-01...
[ 5.293412] systemd[1]: Expecting device dev-dri-card0.device - /dev/dri/card0...
[ 5.303795] systemd[1]: Expecting device dev-dri-renderD128.device - /dev/dri/renderD128...
[ 5.315055] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
[ 5.325289] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 5.337089] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 5.348427] systemd[1]: Reached target slices.target - Slice Units.
[ 5.357587] systemd[1]: Reached target swap.target - Swaps.
[ 5.366059] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 5.377467] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 5.388984] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 5.400799] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 5.411907] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.422872] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.433632] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.444109] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.454990] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 5.489997] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.500970] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.511741] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.521712] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 5.542115] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 5.553515] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 5.565091] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.578042] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[ 5.589947] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 5.601003] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[ 5.611564] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ 5.612205] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.634265] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[ 5.644853] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[ 5.654509] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.654821] fuse: init (API version 7.39)
[ 5.679748] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 5.691761] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.703273] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.714287] i2c_dev: i2c /dev entries driver
[ 5.716046] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.732918] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 5.743930] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 5.754141] systemd[1]: Started systemd-journald.service - Journal Service.
[ 5.770034] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none.
[ 5.837084] systemd-journald[330]: Received client request to flush runtime journal.
[ 8.503650] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 8.513202] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 8.522598] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 8.532200] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 8.532292] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 8.534138] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 8.564991] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 8.576885] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 8.587553] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 8.597885] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 8.621472] mc: Linux media interface: v0.10
[ 8.656763] hailo: Init module. driver version 4.18.0
[ 8.665234] hailo 0000:01:00.0: Probing on: 1e60:2864...
[ 8.676199] hailo 0000:01:00.0: Probing: Allocate memory for device extension, 11632
[ 8.686035] hailo 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.694262] hailo 0000:01:00.0: Probing: Device enabled
[ 8.696858] videodev: Linux video capture interface: v2.00
[ 8.703080] hailo 0000:01:00.0: Probing: mapped bar 0 - 00000000cc42226d 16384
[ 8.717564] hailo 0000:01:00.0: Probing: mapped bar 2 - 00000000d79a6fe0 4096
[ 8.717572] hailo 0000:01:00.0: Probing: mapped bar 4 - 0000000071e16686 16384
[ 8.717577] hailo 0000:01:00.0: Probing: Force setting max_desc_page_size to 4096 (recommended value is 16384)
[ 8.717601] hailo 0000:01:00.0: Probing: Enabled 64 bit dma
[ 8.717605] hailo 0000:01:00.0: Probing: Using userspace allocated vdma buffers
[ 8.717610] hailo 0000:01:00.0: Disabling ASPM L0s
[ 8.717615] hailo 0000:01:00.0: Successfully disabled ASPM L0s
[ 8.869028] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 8.884726] pispbe 1000880000.pisp_be: Runtime PM usage count underflow!
[ 8.900615] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.901350] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.923276] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 8.933270] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 8.939738] rpivid 1000800000.codec: Device registered as /dev/video19
[ 8.944011] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 8.962119] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.970114] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.032905] Bluetooth: Core ver 2.22
[ 9.041636] NET: Registered PF_BLUETOOTH protocol family
[ 9.048789] Bluetooth: HCI device and connection manager initialized
[ 9.057564] Bluetooth: HCI socket layer initialized
[ 9.088680] hailo 0000:01:00.0: Firmware was loaded successfully
[ 9.091306] Bluetooth: L2CAP socket layer initialized
[ 9.108121] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 9.113972] Bluetooth: SCO socket layer initialized
[ 9.123143] hailo 0000:01:00.0: Probing: Added board 1e60-2864, /dev/hailo0
[ 9.145998] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.159915] usbcore: registered new interface driver brcmfmac
[ 9.187637] Bluetooth: HCI UART driver ver 2.3
[ 9.193598] Bluetooth: HCI UART protocol H4 registered
[ 9.207485] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.225482] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 9.244433] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 9.276500] Bluetooth: HCI UART protocol Broadcom registered
[ 9.516873] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 9.526443] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 9.545927] alsactl[464]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 9.545927] alsactl[463]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 9.550853] ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting
[ 9.634375] Bluetooth: hci0: BCM: chip id 107
[ 9.634616] Bluetooth: hci0: BCM: features 0x2f
[ 9.635725] Bluetooth: hci0: BCM4345C0
[ 9.635730] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 9.669048] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 10.150801] nvidia: loading out-of-tree module taints kernel.
[ 10.157941] nvidia: module license 'NVIDIA' taints kernel.
[ 10.164757] Disabling lock debugging due to kernel taint
[ 10.171455] nvidia: module license taints kernel.
[ 10.205730] nvidia-nvlink: Nvlink Core is being initialized, major device number 508
[ 10.214873] NVRM: No NVIDIA GPU found.
[ 10.249916] nvidia-nvlink: Unregistered Nvlink Core, major device number 508
[ 10.378565] Bluetooth: hci0: BCM: features 0x2f
[ 10.385830] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 10.393356] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 10.400887] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 11.946319] nvidia-nvlink: Nvlink Core is being initialized, major device number 508
[ 11.955453] NVRM: No NVIDIA GPU found.
[ 11.977914] nvidia-nvlink: Unregistered Nvlink Core, major device number 508
[ 13.673518] nvidia-nvlink: Nvlink Core is being initialized, major device number 508
[ 13.682660] NVRM: No NVIDIA GPU found.
[ 13.722074] nvidia-nvlink: Unregistered Nvlink Core, major device number 508
[ 14.349498] Adding 4194288k swap on /var/swap. Priority:-2 extents:131 across:98697216k SS
[ 14.507893] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.507902] Bluetooth: BNEP filters: protocol multicast
[ 14.507909] Bluetooth: BNEP socket layer initialized
[ 14.509784] Bluetooth: MGMT ver 1.22
[ 14.517207] NET: Registered PF_ALG protocol family
[ 16.244195] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 16.244202] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 16.246844] pps pps0: new PPS source ptp0
[ 16.247049] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 16.276365] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 19.251711] Bluetooth: RFCOMM TTY layer initialized
[ 19.251726] Bluetooth: RFCOMM socket layer initialized
[ 19.251735] Bluetooth: RFCOMM ver 1.11
[ 20.346748] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 23.256067] ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting
[ 31.391383] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 31.395856] Bridge firewalling registered
[ 31.562960] Initializing XFRM netlink socket
[ 96.248387] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 96.248402] Bluetooth: HIDP socket layer initialized
[ 96.249007] hid-generic 0005:099A:0500.0003: unknown main item tag 0x0
[ 96.249125] input: Bluetooth Keyboard as /devices/platform/soc/107d50c000.serial/serial0/serial0-0/bluetooth/hci0/hci0:11/0005:099A:0500.0003/input/input11
[ 96.249519] hid-generic 0005:099A:0500.0003: input,hidraw2: BLUETOOTH HID v1.1b Keyboard [Bluetooth Keyboard] on 2c:cf:67:27:01:49
[ 223.084903] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

** sudo vclog log --msg **
004747.163: Initial voltage 800000 temp 47172
004944.829: avs_2712: AVS pred 8224 822400 temp 49920
004944.840: vpred 822 mV +0
005568.944: FB framebuffer_swap 1
005586.484: Select resolution HDMI0/2 hotplug 1 max_mode 2
005598.874: HDMI0 edid block 0 offset 0
005598.884: 00ffffffffffff004c2d940f43325743
005598.896: 011f0103804627782ace51a6574c9f26
005598.907: 125054bfef80714f810081c081809500
005598.919: a9c0b300010108e80030f2705a80b058
005598.931: 8a00b9882100001e000000fd00184b1e
005598.942: 873c000a202020202020000000fc0055
005598.954: 3332523539780a2020202020000000ff
005598.965: 0048345a523130303032380a20200133
005611.355: HDMI0 edid block 1 offset 128
005611.367: 020334f04d611203130420221f105f60
005611.377: 5d5e23090707830100006d030c001000
005611.386: b83c20006001020367d85dc401788003
005611.396: e30f0104023a801871382d40582c4500
005611.405: b9882100001e023a80d072382d40102c
005611.415: 4580b9882100001e04740030f2705a80
005611.424: b0588a00b9882100001e565e00a0a0a0
005611.434: 295030203500b9882100001a000000a0
005611.462: HDMI0: best-mode 2 (limit 2) 1920x1080 60 Hz CEA modes 18000d8005000000000000e003000000 extensions 1
005611.476: Select resolution HDMI1/2 hotplug 0 max_mode 2
005611.516: FB0 disp 0 max-fb 2 1920x1080 stride 3840 base 0x3f800000
006502.636: dtb_file 'bcm2712-rpi-5-b.dtb'
006601.747: dtparam: spi=on
006613.155: dtparam: audio=on
006617.540: Unknown dtparam 'audio' - ignored
006672.921: Loaded overlay 'vc4-kms-v3d-pi5'
006673.033: dtparam: uart0=on
006684.085: dtparam: pciex1_gen=3
009924.520: Starting OS 9924 ms
009927.159: 00000040: -> 00000480
009927.177: 00000030: -> 00100080
009927.193: 00000034: -> 00100080
009927.210: 00000038: -> 00100080
009927.227: 0000003c: -> 00100080
010029.265: sdram: sdram refresh 2081->4162 (2)

** sudo vclog log --assert **

Memory

** cat /proc/meminfo **
MemTotal: 8241488 kB
MemFree: 5734656 kB
MemAvailable: 7182064 kB
Buffers: 79968 kB
Cached: 1618192 kB
SwapCached: 0 kB
Active: 1351552 kB
Inactive: 783424 kB
Active(anon): 633184 kB
Inactive(anon): 0 kB
Active(file): 718368 kB
Inactive(file): 783424 kB
Unevictable: 127648 kB
Mlocked: 0 kB
SwapTotal: 4194288 kB
SwapFree: 4194288 kB
Zswap: 0 kB
Zswapped: 0 kB
Dirty: 1040 kB
Writeback: 0 kB
AnonPages: 564720 kB
Mapped: 493184 kB
Shmem: 196176 kB
KReclaimable: 39424 kB
Slab: 85392 kB
SReclaimable: 39424 kB
SUnreclaim: 45968 kB
KernelStack: 6544 kB
PageTables: 15936 kB
SecPageTables: 0 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 8315024 kB
Committed_AS: 3698400 kB
VmallocTotal: 68180246528 kB
VmallocUsed: 23776 kB
VmallocChunk: 0 kB
Percpu: 1280 kB
CmaTotal: 327680 kB
CmaFree: 311200 kB

** sudo cat /sys/kernel/debug/dma_buf/bufinfo **

Dma-buf Objects:
size flags mode count exp_name ino name
11960320 00000002 00080007 00000013 drm 00000031
write fence:drm_sched v3d_tfu seq 432 signalled
write fence:drm_sched v3d_render seq 402 signalled
Attached Devices:
axi:gpu
axi:gpu
Total 2 devices attached

11960320 00000002 00080007 00000013 drm 00000029
write fence:drm_sched v3d_tfu seq 465 signalled
write fence:drm_sched v3d_render seq 391 signalled
Attached Devices:
axi:gpu
axi:gpu
Total 2 devices attached

11960320 00000002 00080007 00000013 drm 00000027
write fence:drm_sched v3d_tfu seq 433 signalled
write fence:drm_sched v3d_render seq 400 signalled
Attached Devices:
axi:gpu
axi:gpu
Total 2 devices attached

00016384 00000000 00080005 00000010 drm 00000007
write fence:drm_sched v3d_render seq 1260 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

00016384 00000000 00080005 00000010 drm 00000006
write fence:drm_sched v3d_render seq 1191 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

00016384 00000000 00080005 00000006 drm 00000005
Attached Devices:
1002000000.v3d
Total 1 devices attached

33177600 00000000 00080005 00000010 drm 00000004
write fence:drm_sched v3d_render seq 1263 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

00016384 00000000 00080005 00000010 drm 00000003
write fence:drm_sched v3d_render seq 1261 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

00016384 00000000 00080005 00000010 drm 00000002
write fence:drm_sched v3d_render seq 1065 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

33177600 00000000 00080005 00000010 drm 00000001
write fence:drm_sched v3d_render seq 1262 signalled
Attached Devices:
1002000000.v3d
1002000000.v3d
Total 2 devices attached

Total 10 objects, 102318080 bytes

** sudo cat /sys/kernel/debug/vcsm-cma/state **
cat: /sys/kernel/debug/vcsm-cma/state: No such file or directory

Media Devices

** media-ctl -d 0 -p **
Media controller API version 6.6.51

Media device information

driver pispbe
model pispbe
serial
bus info platform:1000880000.pisp_be
hw revision 0x2252700
driver version 6.6.51

Device topology

  • entity 1: pispbe (8 pads, 8 links)
    type V4L2 subdev subtype Unknown flags 0
    pad0: Sink
    <- "pispbe-input":0 [ENABLED,IMMUTABLE]
    pad1: Sink
    <- "pispbe-tdn_input":0 [ENABLED,IMMUTABLE]
    pad2: Sink
    <- "pispbe-stitch_input":0 [ENABLED,IMMUTABLE]
    pad3: Source
    -> "pispbe-output0":0 [ENABLED,IMMUTABLE]
    pad4: Source
    -> "pispbe-output1":0 [ENABLED,IMMUTABLE]
    pad5: Source
    -> "pispbe-tdn_output":0 [ENABLED,IMMUTABLE]
    pad6: Source
    -> "pispbe-stitch_output":0 [ENABLED,IMMUTABLE]
    pad7: Sink
    <- "pispbe-config":0 [ENABLED,IMMUTABLE]

  • entity 10: pispbe-input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video20
    pad0: Source
    -> "pispbe":0 [ENABLED,IMMUTABLE]

  • entity 16: pispbe-tdn_input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video21
    pad0: Source
    -> "pispbe":1 [ENABLED,IMMUTABLE]

  • entity 22: pispbe-stitch_input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video22
    pad0: Source
    -> "pispbe":2 [ENABLED,IMMUTABLE]

  • entity 28: pispbe-output0 (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video23
    pad0: Sink
    <- "pispbe":3 [ENABLED,IMMUTABLE]

  • entity 34: pispbe-output1 (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video24
    pad0: Sink
    <- "pispbe":4 [ENABLED,IMMUTABLE]

  • entity 40: pispbe-tdn_output (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video25
    pad0: Sink
    <- "pispbe":5 [ENABLED,IMMUTABLE]

  • entity 46: pispbe-stitch_output (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video26
    pad0: Sink
    <- "pispbe":6 [ENABLED,IMMUTABLE]

  • entity 52: pispbe-config (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video27
    pad0: Source
    -> "pispbe":7 [ENABLED,IMMUTABLE]

** media-ctl -d 1 -p **
Media controller API version 6.6.51

Media device information

driver pispbe
model pispbe
serial
bus info platform:1000880000.pisp_be
hw revision 0x2252700
driver version 6.6.51

Device topology

  • entity 1: pispbe (8 pads, 8 links)
    type V4L2 subdev subtype Unknown flags 0
    pad0: Sink
    <- "pispbe-input":0 [ENABLED,IMMUTABLE]
    pad1: Sink
    <- "pispbe-tdn_input":0 [ENABLED,IMMUTABLE]
    pad2: Sink
    <- "pispbe-stitch_input":0 [ENABLED,IMMUTABLE]
    pad3: Source
    -> "pispbe-output0":0 [ENABLED,IMMUTABLE]
    pad4: Source
    -> "pispbe-output1":0 [ENABLED,IMMUTABLE]
    pad5: Source
    -> "pispbe-tdn_output":0 [ENABLED,IMMUTABLE]
    pad6: Source
    -> "pispbe-stitch_output":0 [ENABLED,IMMUTABLE]
    pad7: Sink
    <- "pispbe-config":0 [ENABLED,IMMUTABLE]

  • entity 10: pispbe-input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video28
    pad0: Source
    -> "pispbe":0 [ENABLED,IMMUTABLE]

  • entity 16: pispbe-tdn_input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video29
    pad0: Source
    -> "pispbe":1 [ENABLED,IMMUTABLE]

  • entity 22: pispbe-stitch_input (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video30
    pad0: Source
    -> "pispbe":2 [ENABLED,IMMUTABLE]

  • entity 28: pispbe-output0 (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video31
    pad0: Sink
    <- "pispbe":3 [ENABLED,IMMUTABLE]

  • entity 34: pispbe-output1 (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video32
    pad0: Sink
    <- "pispbe":4 [ENABLED,IMMUTABLE]

  • entity 40: pispbe-tdn_output (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video33
    pad0: Sink
    <- "pispbe":5 [ENABLED,IMMUTABLE]

  • entity 46: pispbe-stitch_output (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video34
    pad0: Sink
    <- "pispbe":6 [ENABLED,IMMUTABLE]

  • entity 52: pispbe-config (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video35
    pad0: Source
    -> "pispbe":7 [ENABLED,IMMUTABLE]

** media-ctl -d 2 -p **
Media controller API version 6.6.51

Media device information

driver rpivid
model rpivid
serial
bus info platform:rpivid
hw revision 0x0
driver version 6.6.51

Device topology

  • entity 1: rpivid-source (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video19
    pad0: Source
    -> "rpivid-proc":0 [ENABLED,IMMUTABLE]

  • entity 3: rpivid-proc (2 pads, 2 links)
    type Node subtype Unknown flags 0
    pad0: Sink
    <- "rpivid-source":0 [ENABLED,IMMUTABLE]
    pad1: Source
    -> "rpivid-sink":0 [ENABLED,IMMUTABLE]

  • entity 6: rpivid-sink (1 pad, 1 link)
    type Node subtype V4L flags 0
    device node name /dev/video19
    pad0: Sink
    <- "rpivid-proc":1 [ENABLED,IMMUTABLE]

** media-ctl -d 3 -p **
Failed to enumerate /dev/media3 (-2)

** media-ctl -d 4 -p **
Failed to enumerate /dev/media4 (-2)

Cameras

** rpicam-hello --list-cameras **
rpicam-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.2: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE

Versions

** uname -a **
Linux pi5 6.6.51+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) aarch64 GNU/Linux

** cat /etc/os-release **
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

** vcgencmd version **
2024/10/21 15:27:49
Copyright (c) 2012 Broadcom
version 951e1cc9 (release) (embedded)

** rpicam-hello --version **
rpicam-hello: symbol lookup error: /lib/aarch64-linux-gnu/rpicam_app.so.1.5.2: undefined symbol: _ZN9libcamera8controls3rpi11ScalerCropsE
@arsatyants
Copy link
Author

it does not work again after removing all libcamera-related files in /usr/local/lib/aarch64-linux-gnu/ (but not the folder libcamera)

take in account /lib/aarch64-linux-gnu/rpicam_app.so.1.5.2 the last #723 bug was with /lib/aarch64-linux-gnu/rpicam_app.so.1.5.1:

@naushir
Copy link
Collaborator

naushir commented Nov 4, 2024

You need to build and install libcamera from this repo: https://github.com/raspberrypi/libcamera. Removing the system install of libcamera is not enough.

@arsatyants
Copy link
Author

libcamera is not buildable code

../src/libcamera/pipeline/rpi/pisp/pisp.cpp: In member function ‘int libcamera::PiSPCameraData::configureCfe()’:
../src/libcamera/pipeline/rpi/pisp/pisp.cpp:1868:13: error: ‘PISP_IMAGE_FORMAT_COMPRESSED’ was not declared in this scope; did you mean ‘PISP_IMAGE_FORMAT_UNCOMPRESSED’?
1868 | if (PISP_IMAGE_FORMAT_COMPRESSED(image.format)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| PISP_IMAGE_FORMAT_UNCOMPRESSED

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@arsatyants @naushir