config-2layer.kibot.yaml

# Example KiPlot config file
kibot:
  version: 1

filters:
  - name: only_jlc_parts
    comment: 'Only parts with JLC code'
    type: 'generic'
    include_only:
      - column: 'JLCPCB'
        regex: '^C\d+'
  - name: fix_rotation
    comment: 'Adjust rotation for JLC'
    type: rot_footprint
    rotations:
      - ["^TI_SO-", 270.0]
      - ["^SO-", 270.0]
      - ["^HTSSOP-", 270.0]
      - ["^SSOP-", 270.0]

global:
  variant: default

variants:
  - name: default
    comment: 'Just a place holder for the rotation filter'
    type: kibom
    variant: default
  - name: jlcpcb
    comment: 'JLCPCB requires some rotational transforms'
    type: kibom
    variant: jlcpcb
    pre_transform: fix_rotation

preflight:
  # Disable ERC for now while GPereira updates these items.
  run_erc: false
  update_xml: true
  # Disable DRC for now while GPereira updates these items.
  run_drc: false
  check_zone_fills: true
  ignore_unconnected: false

outputs:
  - name: 'ibom'
    comment: 'Interactive Bill of Materials'
    type: ibom
    dir: ibom

  - name: 'bom'
    comment: 'Bill of Materials'
    type: bom
    dir: .
    options:
      csv:
        hide_pcb_info: true
        hide_stats_info: true
      format: CSV

  - name: 'html_bom'
    comment: 'HTML BOM'
    type: bom
    dir: .
    options:
      html:
        datasheet_as_link: Datasheet
        digikey_link: Digikey
        title: 'Index MOBO Bill of Materials'

  - name: 'print_sch'
    comment: "Print schematic (PDF)"
    type: pdf_sch_print
    dir: .
    options:
      output: Schematic.pdf

  - name: 'print_front'
    comment: "Print F.Cu+Dwgs.User"
    type: pdf_pcb_print
    dir: .
    options:
      output_name: PCB.pdf
      separated: true
    layers:
      - layer: F.Cu
        description: 'Front Copper'
      - layer: B.Cu
        description: 'Back Copper'
      - layer: F.SilkS
        description: 'Front Silk'
      - layer: B.SilkS
        description: 'Rear Silk'

  - name: 'gerbers'
    comment: "Gerbers for the board house"
    type: gerber
    dir: gerbers
    options:
      # generic layer options
      exclude_edge_layer: true
      exclude_pads_from_silkscreen: false
      use_aux_axis_as_origin: false
      plot_sheet_reference: false
      plot_footprint_refs: true
      plot_footprint_values: true
      force_plot_invisible_refs_vals: false
      tent_vias: true

      # gerber options
      line_width: 0.1
      subtract_mask_from_silk: false
      use_protel_extensions: false
      gerber_precision: 4.6
      create_gerber_job_file: true
      use_gerber_x2_attributes: false
      use_gerber_net_attributes: false

      output: '%f.%i'


    layers:
      # When Moving to Four Layer, Set G2L and G3L as the suffixes
      - layer: F.Cu
        suffix: GTL
      - layer: B.Cu
        suffix: GBL
      - layer: F.SilkS
        suffix: GTO
      - layer: B.SilkS
        suffix: GBO
      - layer: F.Mask
        suffix: GTS
      - layer: B.Mask
        suffix: GBS
      - layer: Edge.Cuts
        suffix: GKO

  - name: 'drill_file'
    comment: 'Drill file for Board House'
    type: excellon
    dir: gerbers
    options:
      metric_units: false
      pth_and_npth_single_file: true

  - name: board_top
    comment: "Top layer view"
    type: pcbdraw
    dir: .
    options:
      format: png

  - name: board_bottom
    comment: "Bottom layer view"
    type: pcbdraw
    dir: .
    options:
      format: png
      bottom: true

  - name: 'pick_and_place_file'
    comment: 'Pick and Place Location File'
    type: position
    dir: gerbers
    options:
      format: CSV

  - name: 'bom_jlc'
    comment: "BoM for JLC"
    type: bom
    options:
      output: '%f_bom_jlc.%x'
        # exclude_filter: only_jlc_parts
      ref_separator: ','
      columns:
        - field: Value
          name: Comment
        - field: References
          name: Designator
        - field: Footprint
          name: Footprint
        - field: JLCPCB
          name: 'LCSC Part #'
      csv:
        hide_pcb_info: true
        hide_stats_info: true
        quote_all: true

  - name: 'pick_and_place_jlc'
    comment: 'Pick and place file, JLC style'
    type: position
    options:
      output: '%f_cpl_jlc.%x'
      format: CSV
      units: millimeters
      separate_files_for_front_and_back: false
      only_smd: true
      variant: jlcpcb
      columns:
        - id: Ref
          name: Designator
        - id: PosX
          name: "Mid X"
        - id: PosY
          name: "Mid Y"
        - id: Side
          name: Layer
        - id: Rot
          name: Rotation

  - name: 'step_file'
    comment: 'STEP file generation'
    type: step
    dir: .