Skip to content

Latest commit

 

History

History
109 lines (98 loc) · 3.23 KB

README.md

File metadata and controls

109 lines (98 loc) · 3.23 KB
Raw

SmartThings Edge Driver for Sony Bravia TVs

Driver Folder

Overview

Installation

On your TV:

  • Turn on Network -> Remote Start
  • Turn on Network -> Home Network -> Simple IP Control
  • Set Network -> Home Network -> Authentication to Normal and Pre-Shared Key
  • Set a Pre-Shared Key

In SmartThings:

  • Enroll in the channel and install the driver
  • With the TV on, select to scan nearby for new devices in the SmartThings app
  • In the settings menu of the new device, enter the pre-shared key and configure the number of inputs

Settings

  • Passkey - The Pre-Shared Key set up on your TV. This setting is required to be able to launch apps.
  • HDMI Inputs - The number of HDMI inputs to include in the source list.
  • Component Inputs - The number of Component inputs to include in the source list.
  • Composite Inputs - The number of Composite inputs to include in the source list.
  • Screen Mirroring Inputs - The number of Screen Mirroring inputs to include in the source list.
  • PC Inputs - The number of PC inputs to include in the source list.
  • SCART Inputs - The number of SCART inputs to include in the source list.
  • Re-query App List on Refresh - The app list will be re-queried on hub reboot and when settings are changed. Enabling this setting will also re-query the app list when the device is refreshed. This generally shouldn't be necessary.
  • Remove System Apps from List - Remove the following apps from the app list:
    • Bonus Offer
    • BRAVIA notifications
    • Help
    • Play Store
    • Sony Select
    • Timers & Clock
    • TV Control with Smart Speakers
  • Remove Duplicate Apps from List - Eliminate duplicate app names from the app list. The first uri discovered will be mapped to the app name.
  • IRCC Command Delay - The delay (in milliseconds) between IRCC commands sent using the Send command automation.

Sending IRCC Commands

Automations can use Send command to send a series of remote control commands. The commands should be a comma-delimited series of integers. The IRCC codes below are from the Sony documentation. There are other codes beyond these, though all codes may not work with all models.

Command Code
Display 5
Home 6
Options 7
Return 8
Up 9
Down 10
Right 11
Left 12
Confirm 13
Red 14
Green 15
Yellow 16
Blue 17
Num1 18
Num2 19
Num3 20
Num4 21
Num5 22
Num6 23
Num7 24
Num8 25
Num9 26
Num0 27
Volume Up 30
Volume Down 31
Mute 32
Channel Up 33
Channel Down 34
Subtitle 35
DOT 38
Picture Off 50
Wide 61
Jump 62
Sync Menu 76
Forward 77
Play 78
Rewind 79
Prev 80
Stop 81
Next 82
Pause 84
Flash Plus 86
Flash Minus 87
TV Power 98
Audio 99
Input 101
Sleep 104
Sleep Timer 105
Video 2 108
Picture Mode 110
Demo Surround 121
HDMI 1 124
HDMI 2 125
HDMI 3 126
HDMI 4 127
Action Menu 129
Help 130

Live Logging

Instructions