System Requirements and BOM

Hardware BOM

• Xadow GSM+BLE w/ antenna [http://wiki.seeed.cc/Xadow_GSMPlusBLE/]
• Xadow 1.54” Touchscreen [http://wiki.seeed.cc/Xadow_1.54_inch_Touchscreen/]
• Xadow Audio [http://wiki.seeed.cc/Xadow_Audio/]
• Xadow GPSv2 [http://wiki.seeed.cc/Xadow_GPS_V2/]
• Xadow Basic Sensors [http://wiki.seeed.cc/Xadow_Basic_Sensors/]
• LiPo battery 520mAh (or higher...)
• [Casing material info coming soon...]

Software Requirements

Besides different options for the Development Environment for RePhone, and besides some of them being more effective and powerful and supported than others (writing code directly in C++ for instance), we decided to use the Arduino IDE for RePhone Kit to lower the entry barrier and make InPe' available to a wider audience of developers.

To upload and use the InPe' firmware you will need:

• Windows XP/Vista/7/8/8.1
  • If you are working on OS X we suggest you to run one of the aforementioned in a virtual machine. We are currently developing on Windows Vista 64 bit - Service Pack 2 running on Virtual Box [http://pclosmag.com/html/Issues/201309/page15.html - needs to be tested!]
  • If you are working on a Linux machine you might want to check https://www.seeed.cc/Arduino-IDE-for-RePhone-running-on-GNU-Linux-t-5198.html
• Arduino IDE for RePhone Kit http://wiki.seeed.cc/Arduino_IDE_for_RePhone_Kit/
• InPe’ repository at https://github.com/opencarecc/inpe by clicking the "Clone or download" and then the "Download ZIP" button