Skip to content

Latest commit

 

History

History
53 lines (39 loc) · 2.28 KB

README.md

File metadata and controls

53 lines (39 loc) · 2.28 KB
Raw

SonyQX30_Remote

Raspberry Pi 3 Python based App to stream Live Video out from Sony lensstyle QX30 for drone applications Features

  1. Control Sony Lens Camera: Take Picture or Video, Zoom, switch mode
  2. See status of Sony Lens Camera: battery, SD Card, mode and zoom factor
  3. Live picture feed
  4. See status of Autopilot: battery, GPS Quality, artifical horizon, speed, altitude, yaw orientation
  5. See live feed from Raspy Cam
  6. switch to see both cams at one time, or only Sony or only Raspy Cam
  7. experimential Face detection with OpenCV

My initial idea was to control camera functions with rc inputs via an arduino nano connected with USB to Raspberry. But as we have mavlink i think it is better to monitor channel_raw input params. Arduino is only able to monitor 3 channels at one time.

Ideas for future releases:

  1. add precicion landing with Pi Camera face down (moved by a small servo)
  2. add object tracking by moving the Sony Gimbal
  3. add more control over Sony Camera with a menu controlled by two channels, one to move the pointer and one to manipulate the value

requirements Hardware:

  1. Raspberry Pi 3
  2. Raspberry Pi Camera
  3. Sony DSC QX1/10/30
  4. HDMI Monitor

requirements Software:

  1. Raspberry Pi Desktop or Ubuntu
  2. Python 2.7 (was the max Version for Dronekit 1.x will be Python 3 for future releases)
  3. Mavproxy (will be removed as Dronekit 2.0 don't need it)
  4. Dronekit 1.5 (will be migrates to 2.0)
  5. OpenCV

To do:

  1. Migrate to DKPY 2.0
  2. remove code for controlling RC-in channels with Arduino Serial connection and monitor channels via mavlink

You can find informations on how to install needed modules on the following pages:

https://www.raspberrypi.org/downloads/

http://python.dronekit.io/1.5.0/

http://ardupilot.github.io/MAVProxy/

https://opencv.org

detailed informations on how to compile openCV on Adrians pages: https://www.pyimagesearch.com/2017/09/04/raspbian-stretch-install-opencv-3-python-on-your-raspberry-pi/

The pictures below are showing the output of Raspberry Pi. You can connect the HDMI port to an Ammimon Connex or Lightbridge to get both camera feeds transmitted