Start Klipper, Fluidd, Mainsail, Octoprint with Streaming Cam and Config Editor and also a firmware build image
WARNING be warned, I did not care about security (e.g. all auth is off, privileged access is granted).
WARNING - so only use this in a save environment and know what you do!
I like portainer as docker Web-GUI. You can use it to start the yaml file as a stack after bringing portainer up by:
docker run -d -p 9000:9000 --name portainer --restart=always -v /var/run/docker.sock:/var/run/docker.sock -v portainer_data:/data portainer/portainer-ce
Access Portainer: http://192.168.178.120:9000
- Start the stack (see yaml file in this folder)
- Access the Config-Editor (see the links below) and upload all files found in
https://github.com/naxan6/QidiKlipperFlashConfig/tree/main/configs
to
/cfg
(drag-and-drop from eg. windows explorer works great!)
be warned, you should look them through. Know what you do.
btw. I have 20T pulleys, an Icarus with Mini Sherpa and a PEI sheet as print surface - Alter printer.cfg to match your printers serial-device
- Right click Folder "cfg" and select "open in integrated terminal" --> the terminal open in the lower part.
- execute chmod 666 moonraker.cfg --> this grants readwrite files to everyone (including the moonraker-software that needs this)
- Restart the containers mhprinddklipper and after that mhprinddmoonraker
- Access Fluidd-Webgui (and all others) and check connectivity/configure everything to your liking (see the links below)
-
Fluidd: http://192.168.178.120:8093
-
Mainsail: http://192.168.178.120:8094
-
Octoprint: http://192.168.178.120:8095
-
Config-Editor: http://192.168.178.110:8096/?folder=/mhprinddFolders/
-
Cam1-Stream: http://192.168.178.120:8093/cam1/stream (the other ports 8094 and 8095 should also work)
-
Cam1-Snapshot: http://192.168.178.120:8093/cam1/snapshot (the other ports 8094 and 8095 should also work)