Skip to content

ThermalDuct

Jump to bottom
Jonathan edited this page Aug 17, 2020 · 4 revisions

ThermalDuct

The ThermalDuct element performs a simple adiabatic pressure loss calculation. The pressure loss is calculated by the S_dP socket (or input by the user if this socket is empty). The duct maintains a constant enthalpy while the pressure loss is applied.

Usage

  • The duct element calculates an pressure drop.

  • The pressure drop can either be input or calculated from a subelement.

  • The heat loss can either be input or calculated from a subelement.

  • There are two option switches that determine where the dP and Q are calculated.

This wiki page is intended to serve as documentation for the NPSS Power System Library (PSL). The PSL is maintained by NASA at the NASA Glenn Research Center, and funded by the Revolutionary Vertical Lift Technology (RVLT) project. A detailed table of contents for this page can be found in the Home page.

Table of Contents

  1. Home
  2. Library Structure
  3. Fundamental Classes and Components
  4. Modeling Components
  5. Examples
Clone this wiki locally