Skip to content

Latest commit

 

History

History
32 lines (24 loc) · 1012 Bytes

README.md

File metadata and controls

32 lines (24 loc) · 1012 Bytes
Raw

Prusa Slicer profiles

This repo contains Prusa Slicer profiles for MK3S+ derived from the ones generated with the config.

Warning

This is a work in progress repo, use at your own risk!

Installation

Clone this repo into your Slicer's profile directory, on Linux, it is currently ~/.config/PrusaSlicer/print. If git does not allow to clone into a non-empty directory, clone it to /tmp and then move all the files (including the .git) directory to the profiles' folder.

Naming scheme

lh**_per*_top*_bot*_ew**_inf**_fill****__ef**_seam****.ini
  • lh --- layer height, given in one-hundredths of milimeters, e.g. 020 is 0.20mm,
  • per --- number of perimeters,
  • top --- number of top solid layers,
  • bot --- number of bottom solid layers,
  • ew --- extrusion width, analogically to lh,
  • inf --- infill, given in percent, e.g. 50 means 50% infill,
  • fill --- infill pattern,
  • ef --- elephant foot compensation value, analogically to lh,
  • seam --- seam position.