v0.30.1

QCoDeS 0.30.1 (2021-12-03)

Relax type assertions for DataSet timestamps so that if in the database they are written as integers, as opposed to floats, a DataSet can still be loaded (#3644)

QCoDeS 0.30.0

QCoDeS 0.30.0 (2021-11-23)
New:

• A new DataSet type DataSetInMem has been added. This allows users to meassure without writing raw data to an sqlite database as well as to load netcdf files into a QCoDeS dataset. See here and here. (#3094)

• Added function get_channel_by_name to ChannelList class to get or or more channels in a ChannelList by name. (#3431)

• The changelog for upcoming changes in the next release is now automatically build from fragments as part of the documentation. (#3451)

Improved:

• The QcoDeS monitor can now be launched directly from a console using by running qcodes-monitor(.exe) (#3475)

• dond avoids setting setpoint parameters with values that are already set. This significantly improves the performance of the dond function in multi-dimensional measurements. (#3534)

• doNd functions now manually wait the delay between setpoints instead of using parameters post_delay attribute. This change prevents unintentional slow downs in measurements when the step delay of a setpoint parameter is considerably lower than the delay between measurement step points that passed into doNd functions. (#3576)

• It is now possible to configure the name of an exported files to include elements such as guid, sample_name and experiment_name. The default format has changed to include the captured_run_id and guid. (#3586)

Improved Drivers:

• Tektronix AWG70000 add support for 70001B and 70002B models. (#3438)

• Added support for flags (auxiliary outputs) for Tektronix AWG70000 sequences (#3450)

• The Galil documentation is now correctly included in the QCoDeS docs (#3452)

• Improved the drivers for Keysight N51x1 and N51x3 signal generators by:

  1. Adding explicit support for N5173B
  2. Fixing the power range of N5183B
  3. Fixing the frequency range options for N51x1 (#3555)

Under the hood:
*The QCoDeS changelog is now being build using towncrier. (#3397)

v0.30.0.dev0

A prerelease to test the automatic release

QCoDeS 0.29.1

This is a patch release to support the latest version of OpenCensus
to help resolve issues where pip is unable to pick the correct set
of dependencies. (#3426)

Full Changelog: v0.29.0...v0.29.1

QCoDeS 0.29.0 - September 2021

Changelog for QCoDeS 0.29.0

The September 2021 release of QCoDeS.

New:

• Simultaneous ramping feature that enables you to sweep an AMI 3D magnet to (x,y,z) in
  time T or at vector ramp rate R, ramping all 3 axes together (in parallel) and
  making a linear/vector trajectory from current field to the setpoint
  in 3D magnetic field space. Please see updates to the AMI magnet driver example
  documentation. (#3233)
• Galil DMC-41x3 stepper motor controller that can be used with Janis probes for
  moving the measurement arm. (#2626)

Improved:

• Documentation: clarified contribution guides and contacts (#3375, #3370)
• Raise ValueError if given more than one result for the same parameter name
  in DataSaver.add_result. (#3265)

Improved drivers:

• Keithley 2600 SMU support to return both voltage and current compliance limit errors. (#3339, #3362)
• Make SR86xBufferReadout parameter take kwargs and pass them to base class. (#3341)

Under the hood:

• Logging update to explicitly set encoding for file handler thus
  preventing issues on systems with less widespread encodings. (#3327)
• Add type packages discovered by mypy --install-types. (#3379)
• Resolved uncertainties package issues. (#3334)
• ISSUE_TEMPLATE.md updates for reporting a bug. (#3345)
• Make it possible to manually trigger codeql, using codeql-analysis.yml
  recommended by github. (#3314, #3329)
• Remove redundant filters from test runner. (#3295)

QCoDeS 0.29.0a1 - September 2021 (alpha release)

Publishing an alpha release to perform tests before actual release comes out, especially of #3339.

QCoDeS 0.28.0 - August 2021

Changelog for QCoDeS 0.28.0

The August 2021 release of QCoDeS.

---

Breaking Changes:

• get_guids_from_multiple_run_ids accepts connection over dbpath in the function. (#3222)

---

New:

• Use thread pool when acquiring parameters to save time on recreating threads, new ThreadPoolParamsCaller,
  use it in do1d, do2d, dond. (#3170)
• QCoDeS has not the ability to set a default experiment in a Python session, and now, creating/ loading an experiment
  automatically sets that experiment as the default one. (#3214)
• The dond function has gained the ability to produce multiple datasets when measuring multiple parameters. (#3186)
• Make parameter registration on instrument part of parameter init. (#3191)
• Add post sweep actions to doND sweeps. (#3283)
• load experiment functions accept duplicated experiment name, and new_experiment warns if creates duplicated
  experiment. (#3296)

---

Improved:

• Fix shapes of dond datasets with additional setpoints. (#3305)

---

Improved drivers:

• Update voltage parameter for Keithley2600 SMU to be aware of measurement status. (#3251)

---

Under the hood:

• Adding a Sphinx extension to document Parameter attributes. (#3224)
• Work around legacy test issue with hf51.12.1 on conda forge. (#3278)
• Make qcodes install mostly pep517/518 compliant. (#3288)
• Log all installed packages. (#3289)
• Remove pre-commit job from the repository in favor of pre-commit integration in the CI. (#3293, #3290)
• Explicitly depend on setuptools. (#3294)

QCoDeS 0.27.0 - July 2021

Changelog for QCoDeS 0.27.0

The July 2021 release of QCoDeS.

---

Breaking Changes:

• DelegateInstrument takes parameters as an optional, keyworded input argument. Any arguments passed as positional arguments after this one will break with this change. (#3089)

---

New:

• A generalized N-dimensional dond function has been created to work with sweep objects and measurement parameters. Currently available sweep objects are LinSweep and LogSweep that can be used for dond measurements. (#2990)
• The default value for default_parameter_name in the Loop QCoDeS dataset changed from amplitude to None.
  The amplitude value interferes with datasets where one of the setpoint arrays is called amplitude. (#3095)
• Abstract parameters has been added which allow one to create abstract instrument types that have parameters which can be overwritten in a subclass allowing the creation of instruments
  subclasses with a well-defined api. (#3125, #3217, #3197)
• DataSetProtocol created to define the protocol that datasets must implement to be able to act as a storage device for the measurement class. (#3075, #3092)
• Enable exporting complex numbers to netcdf. (#3126)

---

Improved:

• DelegateInstrument can now support instrument channels. (#3089)
• Decouple measurement name from dataset results table name to allow special characters in the measurement name. (#3185)
• Update the get started document with installing and using spyder and jupyter. (#3179)
• Add underlying_instrument property to _BaseParameter and use it in call_params_threaded instead of root_instrument. (3127)
• Ensure that the per array metadata is also exported to dataarrays and not just datasets. (#3116)
• Use threaded setting from config in doNd functions, and make process_params_meas public. (#3096)
• Don't allow metadata tags that are not valid python identifiers (#3192)
• Pulled out dataframe_to_csv into it's own submodule export_to_csv from the data_set submodule for easier reuse. (#3061)

---

Improved drivers:

• Fix to Rohde & Schwarz ZNB driver for setting npts in CW mode. (#3168)
• Update Keithley 2600 SMU current parameter to be aware of if current compliance is hit during measurement. (#3160)
• Alazar ATS drivers: Fix buffer size for mode='TS' and buffers_per_acquisition > 1. (#3118)
• New parameter complex_voltage has been added to the SR830 lockin amplifier. (#3078)

---

Under the hood:

• Add logging to measurement runs in doNd functions (#3206)
• Fix to speed up and properly set experiment in delegate device test (#3199)
• Remove bare wait test due to random failures (#3198)
• Revert checking of abstract parameters in post init due to unintended side effects (#3197)
• Use public interface for instrument in parameters (#3187)
• Fix numpy deprecation for ragged arrays (#3184)
• Add documentation to explain automatic CI (#3169)
• Give threads time to start in tests (#3167)
• Minimum changes to allow type checking to pass with numpy 1.21 (#3150)
• Add customDimensionsFilter to inject custom dim, and inject pythonExecutable (#3143)
• Add export info metadata to dataset (#3135)
• Pin typing packages the same way as other test dependancies do (#3123)
• Do not preserve gh pages branch history significantly reducing the size of the full clone of the QCoDeS repository (#3122)
• Add typing packages to conda CI (#3115)
• Fix link to pyvisa intersphinx (#3106)
• Compare shapes in RunDescriber equality method (#3105)
• Fix invalid array syntax in json schema (#3097)

QCoDeS 0.26.0 - May 2021

Changelog for QCoDeS 0.26.0

The May 2021 release of QCoDeS.

---

New:

• DelegateInstrument and InstrumentGroup drivers (#2928, #3031)
• Introducing merge_yaml function in Station and allow Station to load
  multiple config yaml files (#2936)
• Keysight VNA P9374A driver (#3034)

---

Improved:

• Ensure that plot dataset uses axis in the expected order (#3017)
• Make doNd reset original post_delay values + fix to keyboard interrupt (#2996)
• [Bug fix] Return parameter data with same type as before applying scale or
  offset (#2980)
• Improved plotting of pre-shaped 2d data (#3024)
• replace the use of Dict with Mapping for input args within instrument
  module (#3040)
• Convert input arguments to Mapping in dataset module (#3051)
• use nan + i*nan as placeholder for complex numbers (#3049)
• Add information about name keyword argument of Measurement module in
  relevant docs (#3052)

---

Improved drivers:

• Make wait times in blocking AMI430 field ramps adjustable (#3032)
• Keithley 2600: 4 probe current sweep support (#3023)

---

Under the hood:

• Add darker to precommit hooks (#2979)
• tests: cleanup warning handling (#2834)
• Fix NumpyJSONEncoder docstring (#2994)
• remove scientific deps job (#3014)
• upgrade precommit hooks to latest version (#3037)

QCoDeS 0.25.0 - April 2021

Changelog for QCoDeS 0.25.0

The April 2021 release of QCoDeS.

---

Breaking Changes:

• get_data_by_id no longer returns data for standalone parameters if there are no dependent parameters in the dataset. For the same reason plot_by_id and plot_dataset will no longer plot these standalone parameters. (#2918)
• xarray exported data no longer exports extra metadata columns under the extra_metadata tag since the extra dictionary level prevents exporting to netcdf (#2934)

---

Deprecation:

• get_data_by_id and get_shaped_data_by_runid are now deprecated. These functions now all have better alternatives in the build in get_parameter_data as well as Xarray and Pandas exporters. (#2921, #2925)

---

New:

• SP983c Basel IV amplifier remote control driver (#2707)
• Add support for Keysight 34411A (#2927)
• Added the functionality of getting guids from multiple run ids and directly from database (#2930)
• NumpyJSONEncoder: Add support for the uncertanties' UFloat type (#2933)
• Add conversion between qcodes legacy DataSet and xarray format (#2938)

---

Improved:

• plot_dataset: Improved performance by using in memory cache when possible to avoid reloading data from disk (#2918)
• contribution guidelines: remove no longer relevant sections and make the sections on naming somewhat less strict (#2937)
• remove double assignment of dataset variable in example notebook of Performing-measurements-using-qcodes-parameters-and-dataset (#2926)
• Update old driver notebooks (Agilent 34400A) docs (#2377)
• Update link from NI VISA to Keysight IO Libraries Suite on 'Getting Started' Doc (#2948)
• Removed ZI UHFLI notebook (#2893)

---

Improved drivers:

• Significant performance improvement in Tektronix5014 driver (#2910)
• AMI430 3D driver: allow instantiating from names of existing AMI430 instances, next to from AMI430 instances only driver (#2949)
• AMI430 3D driver: add docstring, extra test for initializing from AMI430 by name driver (#2951)
• Driver sr830 update: Add ChannelTrace class and related parameter ch{ch}_datatrace which makes buffered acquisition easier.(#2894)

---

Under the hood:

• Log sample_name, exp_name, dataset name when Measurement starts (#2952)
• Move private dataset export functions to their own module (#2904)
• Remove wait time test (#2935)
• fix(logger): Disable conditionally start logging for Sphinx documentation (#2909)
• Name legacy test datasets (#2950)
• use python -m pip to upgrade pip in github actions (#2955)