Do you think the result of tests are correct?

[ikspress]

I was attepted compile libnfc with libusb-win32, yet it couldn't find any devices which troubled me serveral days (I ensured that I plugged my FT232RL and PN532 module). After two days of debug, I began to suspect libusb-win32 make thing wrong on my machine. So I run the tests in libusb-win32 source tree, getting the following result.

$ ./testlibusb

Dev #0: 0000 - 0000

I would appreciate it if you could give me a hand.

[ikspress]

I reconfirmed that I installed FTDI driver and libusb-win32 driver, here're the partial result of the driverquery command

FTDIBUS      USB Serial Converter D Kernel        2021/7/5 20:37:11
FTSER2K      USB Serial Port Driver Kernel        2021/7/5 20:37:48
libusb0      libusb-win32 - Kernel  Kernel        2024/2/22 11:52:25

I noticed #35, is the FT232R* chip works properly with libusb-win32 now? If not, maybe I should purchase another one...

[ikspress]

Here is the screenshot of testlibusb-win.exe

[mcuee]

You have not installed libusb-win32 driver yet.

1. Filter driver -- using the filter driver wizard, not recommended since it may not work with some devices.
2. Device driver -- recommended, please use Zadig to install the device driver, this will replace the FTDI driver and your device will no longer function as a USB serial port.

[ikspress]

Thank you for your patience. libusb-win32 now works correctly! :)