Provide smaller sized models for smaller 3D printers

[sander1095]

I own a Prusa mini+ which can print ~180mm x 180mm x 180mm which is smaller than the required 210mm.

If this model and guide could be updated to also support a smaller model, I could print and set it up with my own printer!

[martinwoodward]

Will take a look at creating a smaller version. In the meantime people have successfully scaled the model down in the prusia slicer and it's come out well so maybe give that a go in the meantime.

[basvandesande]

on my Bambulab A1 mini, I scaled the model down to 86% for both X and Y axis. I left the Z axis to 100%
This should allow me to fit in the electronics. I'll share some pictures once the parts arrive (which should be tmrw).

[sander1095]

Hey @basvandesande , any updates?

[jgarverick]

I'm working on an 80% scaled version for the A1 mini that I'll be testing this weekend. If all looks good I plan on submitting a PR with the updated 3mf file. @basvandesande @sander1095

[martinwoodward]

Awesome thanks @jgarverick