pi5

[droidhackzor]

has anyone gotten this working on a pi5, i had this working on a pi zero w until it died but before that happened, i purchased a pi5 in the hopes that eventually i could figure out a way to use my spare 2TB nvme and m.2 for this since even a sata m.2 is faster than a micro-sd card, however, doing the same setup as for the zero, the pi5 doesn't seem to boot and ssh never connects, i am using a 256gig samsung high endurance and it just sits there. i have ordered a micro to full hdmi so i can use my test-tv to see whats going one during the setup but still not having any luck so figured i'd ask here while i wait for that hdmi. any help would be appreciated.

[marcone]

doing the same setup as for the zero, the pi5 doesn't seem to boot

If by that you mean that you used the prebuilt TeslaUSB image, then that's expected. Pi 5 needs a more recent version of Raspberry Pi OS, so you will need to flash a standard Raspberry Pi OS image and use the "manual" TeslaUSB installation procedure described in the wiki.

[droidhackzor]

Many thanks, I'll look into that after work tomorrow Sent from Samsung Galaxy smartphone. Get Outlook for Android<https://aka.ms/AAb9ysg>

…

________________________________ From: marcone ***@***.***> Sent: Wednesday, October 9, 2024 11:39:48 PM To: marcone/teslausb ***@***.***> Cc: droidhackzor ***@***.***>; Author ***@***.***> Subject: Re: [marcone/teslausb] pi5 (Discussion #886) doing the same setup as for the zero, the pi5 doesn't seem to boot If by that you mean that you used the prebuilt TeslaUSB image, then that's expected. Pi 5 needs a more recent version of Raspberry Pi OS, so you will need to flash a standard Raspberry Pi OS image and use the "manual" TeslaUSB installation procedure described in the wiki. — Reply to this email directly, view it on GitHub<#886 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AAYSDCTRVE3NMEMXYX4D7ETZ2YHKJAVCNFSM6AAAAABPV6QZLSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBZHE4DENQ>. You are receiving this because you authored the thread.Message ID: ***@***.***>