Is support AS6302T possible ?

[harnas8]

First of all, I wanted to thank you for sharing your work - it is really amazing!
Thanks to your project I was able to get the NAS fan management OOTB working., even the network LEDs and the general notification LED are working without any changes to the code.
I'm missing the disk activity LEDs for full happiness. Disk presence LEDs are on but its activity LEDs are off all the time. Could you direct me how to fix it ?
AS6302T.txt

[mafredri]

Thanks for uploading the info @harnas8. I created #11 as a shot in the dark, if we're lucky the AS63 also uses the same pin configuration as AS67. You can try it out if you want.

If that doesn't work, we'll probably need to look at the firmware to figure out what chip/pins are responsible for controlling the disk LEDs.

[harnas8]

Hi @mafredri, thanks for trying. I just tried my luck with your patch.
Current status:
I was able to play more with power and usb including colors - POWER and USB LEDs are working 100% (changing colors, triggering, etc.).
I see that the sata1-4 LEDs appeared (the box has only two drive slots, but it's ok for testing) however they still don't work - only the drive presence LEDs llights up.
I also tried to manually start them without success. I think this box needs more attention.
Could you point me to what I should and how to look for in the original FW?