Bump org.rocksdb:rocksdbjni from 7.0.4 to 8.8.1 in /java/springboot

[dependabot]

Bumps org.rocksdb:rocksdbjni from 7.0.4 to 8.8.1.

Release notes

Sourced from org.rocksdb:rocksdbjni's releases.

RocksDB 8.8.1

8.8.1 (2023-11-17)

Bug fixes

• Make the cache memory reservation accounting in Tiered cache (primary and compressed secondary cache) more accurate to avoid over/under charging the secondary cache.
• Allow increasing the compressed_secondary_ratio in the Tiered cache after setting it to 0 to disable.

8.8.0 (2023-10-23)

New Features

• Introduce AttributeGroup by adding the first AttributeGroup support API, MultiGetEntity(). Through the use of Column Families, AttributeGroup enables users to logically group wide-column entities. More APIs to support AttributeGroup will come soon, including GetEntity, PutEntity, and others.
• Added new tickers rocksdb.fifo.{max.size|ttl}.compactions to count FIFO compactions that drop files for different reasons
• Add an experimental offpeak duration awareness by setting DBOptions::daily_offpeak_time_utc in "HH:mm-HH:mm" format. This information will be used for resource optimization in the future
• Users can now change the max bytes granted in a single refill period (i.e, burst) during runtime by SetSingleBurstBytes() for RocksDB rate limiter

Public API Changes

• The default value of DBOptions::fail_if_options_file_error changed from false to true. Operations that set in-memory options (e.g., DB::Open*(), DB::SetOptions(), DB::CreateColumnFamily*(), and DB::DropColumnFamily()) but fail to persist the change will now return a non-OK Status by default.
• Add new Cache APIs GetSecondaryCacheCapacity() and GetSecondaryCachePinnedUsage() to return the configured capacity, and cache reservation charged to the secondary cache.

Behavior Changes

• For non direct IO, eliminate the file system prefetching attempt for compaction read when Options::compaction_readahead_size is 0
• During a write stop, writes now block on in-progress recovery attempts
• Deleting stale files upon recovery are delegated to SstFileManger if available so they can be rate limited.

Bug Fixes

• Fix a bug in auto_readahead_size where first_internal_key of index blocks wasn't copied properly resulting in corruption error when first_internal_key was used for comparison.
• Fixed a bug where compaction read under non direct IO still falls back to RocksDB internal prefetching after file system's prefetching returns non-OK status other than Status::NotSupported()
• Add bounds check in WBWIIteratorImpl and make BaseDeltaIterator, WriteUnpreparedTxn and WritePreparedTxn respect the upper bound and lower bound in ReadOption. See 11680.
• Fixed the handling of wide-column base values in the max_successive_merges logic.
• Fixed a rare race bug involving a concurrent combination of Create/DropColumnFamily and/or Set(DB)Options that could lead to inconsistency between (a) the DB's reported options state, (b) the DB options in effect, and (c) the latest persisted OPTIONS file.
• Fixed a possible underflow when computing the compressed secondary cache share of memory reservations while updating the compressed secondary to total block cache ratio.

Performance Improvements

• Improved the I/O efficiency of DB::Open a new DB with create_missing_column_families=true and many column families.

RocksDB 8.7.3

8.7.3 (2023-10-30)

Behavior Changes

• Deleting stale files upon recovery are delegated to SstFileManger if available so they can be rate limited.

8.7.2 (2023-10-25)

Public API Changes

• Add new Cache APIs GetSecondaryCacheCapacity() and GetSecondaryCachePinnedUsage() to return the configured capacity, and cache reservation charged to the secondary cache.

Bug Fixes

• Fixed a possible underflow when computing the compressed secondary cache share of memory reservations while updating the compressed secondary to total block cache ratio.
• Fix an assertion failure when UpdeteTieredCache() is called in an idempotent manner.

8.7.1 (2023-10-20)

Bug Fixes

• Fix a bug in auto_readahead_size where first_internal_key of index blocks wasn't copied properly resulting in corruption error when first_internal_key was used for comparison.
• Add bounds check in WBWIIteratorImpl and make BaseDeltaIterator, WriteUnpreparedTxn and WritePreparedTxn respect the upper bound and lower bound in ReadOption. See 11680.

... (truncated)

Changelog

Sourced from org.rocksdb:rocksdbjni's changelog.

8.8.1 (11/17/2023)

Bug fixes

• Make the cache memory reservation accounting in Tiered cache (primary and compressed secondary cache) more accurate to avoid over/under charging the secondary cache.
• Allow increasing the compressed_secondary_ratio in the Tiered cache after setting it to 0 to disable.

8.8.0 (10/23/2023)

New Features

• Introduce AttributeGroup by adding the first AttributeGroup support API, MultiGetEntity(). Through the use of Column Families, AttributeGroup enables users to logically group wide-column entities. More APIs to support AttributeGroup will come soon, including GetEntity, PutEntity, and others.
• Added new tickers rocksdb.fifo.{max.size|ttl}.compactions to count FIFO compactions that drop files for different reasons
• Add an experimental offpeak duration awareness by setting DBOptions::daily_offpeak_time_utc in "HH:mm-HH:mm" format. This information will be used for resource optimization in the future
• Users can now change the max bytes granted in a single refill period (i.e, burst) during runtime by SetSingleBurstBytes() for RocksDB rate limiter

Public API Changes

• The default value of DBOptions::fail_if_options_file_error changed from false to true. Operations that set in-memory options (e.g., DB::Open*(), DB::SetOptions(), DB::CreateColumnFamily*(), and DB::DropColumnFamily()) but fail to persist the change will now return a non-OK Status by default.
• Add new Cache APIs GetSecondaryCacheCapacity() and GetSecondaryCachePinnedUsage() to return the configured capacity, and cache reservation charged to the secondary cache.

Behavior Changes

• For non direct IO, eliminate the file system prefetching attempt for compaction read when Options::compaction_readahead_size is 0
• During a write stop, writes now block on in-progress recovery attempts
• Deleting stale files upon recovery are delegated to SstFileManger if available so they can be rate limited.

Bug Fixes

• Fix a bug in auto_readahead_size where first_internal_key of index blocks wasn't copied properly resulting in corruption error when first_internal_key was used for comparison.
• Fixed a bug where compaction read under non direct IO still falls back to RocksDB internal prefetching after file system's prefetching returns non-OK status other than Status::NotSupported()
• Add bounds check in WBWIIteratorImpl and make BaseDeltaIterator, WriteUnpreparedTxn and WritePreparedTxn respect the upper bound and lower bound in ReadOption. See 11680.
• Fixed the handling of wide-column base values in the max_successive_merges logic.
• Fixed a rare race bug involving a concurrent combination of Create/DropColumnFamily and/or Set(DB)Options that could lead to inconsistency between (a) the DB's reported options state, (b) the DB options in effect, and (c) the latest persisted OPTIONS file.
• Fixed a possible underflow when computing the compressed secondary cache share of memory reservations while updating the compressed secondary to total block cache ratio.

Performance Improvements

• Improved the I/O efficiency of DB::Open a new DB with create_missing_column_families=true and many column families.

8.7.0 (09/22/2023)

New Features

• Added an experimental new "automatic" variant of HyperClockCache that does not require a prior estimate of the average size of cache entries. This variant is activated when HyperClockCacheOptions::estimated_entry_charge = 0 and has essentially the same concurrency benefits as the existing HyperClockCache.
• Add a new statistic COMPACTION_CPU_TOTAL_TIME that records cumulative compaction cpu time. This ticker is updated regularly while a compaction is running.
• Add GetEntity() API for ReadOnly DB and Secondary DB.
• Add a new iterator API Iterator::Refresh(const Snapshot *) that allows iterator to be refreshed while using the input snapshot to read.
• Added a new read option merge_operand_count_threshold. When the number of merge operands applied during a successful point lookup exceeds this threshold, the query will return a special OK status with a new subcode kMergeOperandThresholdExceeded. Applications might use this signal to take action to reduce the number of merge operands for the affected key(s), for example by running a compaction.
• For NewRibbonFilterPolicy(), made the bloom_before_level option mutable through the Configurable interface and the SetOptions API, allowing dynamic switching between all-Bloom and all-Ribbon configurations, and configurations in between. See comments on NewRibbonFilterPolicy()
• RocksDB now allows the block cache to be stacked on top of a compressed secondary cache and a non-volatile secondary cache, thus creating a three-tier cache. To set it up, use the NewTieredCache() API in rocksdb/cache.h..
• Added a new wide-column aware full merge API called FullMergeV3 to MergeOperator. FullMergeV3 supports wide columns both as base value and merge result, which enables the application to perform more general transformations during merges. For backward compatibility, the default implementation implements the earlier logic of applying the merge operation to the default column of any wide-column entities. Specifically, if there is no base value or the base value is a plain key-value, the default implementation falls back to FullMergeV2. If the base value is a wide-column entity, the default implementation invokes FullMergeV2 to perform the merge on the default column, and leaves any other columns unchanged.
• Add wide column support to ldb commands (scan, dump, idump, dump_wal) and sst_dump tool's scan command

Public API Changes

• Expose more information about input files used in table creation (if any) in CompactionFilter::Context. See CompactionFilter::Context::input_start_level,CompactionFilter::Context::input_table_properties for more.
• Options::compaction_readahead_size 's default value is changed from 0 to 2MB.
• When using LZ4 compression, the acceleration parameter is configurable by setting the negated value in CompressionOptions::level. For example, CompressionOptions::level=-10 will set acceleration=10
• The NewTieredCache API has been changed to take the total cache capacity (inclusive of both the primary and the compressed secondary cache) and the ratio of total capacity to allocate to the compressed cache. These are specified in TieredCacheOptions. Any capacity specified in LRUCacheOptions, HyperClockCacheOptions and CompressedSecondaryCacheOptions is ignored. A new API, UpdateTieredCache is provided to dynamically update the total capacity, ratio of compressed cache, and admission policy.
• The NewTieredVolatileCache() API in rocksdb/cache.h has been renamed to NewTieredCache().

... (truncated)

Commits

• 986b8b9 Update version to 8.8.1
• 35b30e4 Make CacheWithSecondaryAdapter reservation accounting more robust (#12059)
• 4d706dc Update HISTORY.md
• b375f59 Rate limiting stale sst files' deletion during recovery (#12016)
• 54bb018 Fix the ZStd checksum (#12005)
• 8d08b84 Update HISTORY.md
• 8767167 Add APIs to query secondary cache capacity and usage for TieredCache (#12011)
• 0d13952 Remove extra semicolon (#12017)
• b5fed4a Fix windows build errors (rdtsc and fnptr) (#12008)
• 366a61a Update 8.8.fb release note
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Superseded by #18.