diff --git a/Doxyfile b/Doxyfile index 84b0ada..480f9db 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,7 +1,7 @@ -# Doxyfile 1.9.7 +# Doxyfile 1.12.0 # This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. +# Doxygen (www.doxygen.org) for a project. # # All text after a double hash (##) is considered a comment and is placed in # front of the TAG it is preceding. @@ -15,10 +15,10 @@ # # Note: # -# Use doxygen to compare the used configuration file with the template +# Use Doxygen to compare the used configuration file with the template # configuration file: # doxygen -x [configFile] -# Use doxygen to compare the used configuration file with the template +# Use Doxygen to compare the used configuration file with the template # configuration file without replacing the environment variables or CMake type # replacement variables: # doxygen -x_noenv [configFile] @@ -63,17 +63,23 @@ PROJECT_BRIEF = "The Windows app for the virtual game controller." PROJECT_LOGO = +# With the PROJECT_ICON tag one can specify an icon that is included in the tabs +# when the HTML document is shown. Doxygen will copy the logo to the output +# directory. + +PROJECT_ICON = + # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If +# entered, it will be relative to the location where Doxygen was started. If # left blank the current directory will be used. OUTPUT_DIRECTORY = ./docs -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096 # sub-directories (in 2 levels) under the output directory of each output format # and will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where +# option can be useful when feeding Doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes # performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to # control the number of sub-directories. @@ -92,7 +98,7 @@ CREATE_SUBDIRS = NO CREATE_SUBDIRS_LEVEL = 8 -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode # U+3044. @@ -101,7 +107,7 @@ CREATE_SUBDIRS_LEVEL = 8 ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this +# documentation generated by Doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, # Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English @@ -115,14 +121,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the @@ -153,13 +159,13 @@ ABBREVIATE_BRIEF = "The $name class" \ the # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief +# Doxygen will generate a detailed section even if there is only a brief # description. # The default value is: NO. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. @@ -167,7 +173,7 @@ ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. @@ -177,11 +183,11 @@ FULL_PATH_NAMES = YES # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. # Stripping is only done if one of the specified strings matches the left-hand # part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to +# If left blank the directory from which Doxygen is run is used as the path to # strip. # # Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. +# will be relative from the directory where Doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. STRIP_FROM_PATH = @@ -195,14 +201,14 @@ STRIP_FROM_PATH = STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't # support long names like on DOS, Mac, or CD-ROM. # The default value is: NO. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the # first line (until the first dot) of a Javadoc-style comment as the brief # description. If set to NO, the Javadoc-style will behave just like regular Qt- # style comments (thus requiring an explicit @brief command for a brief @@ -211,17 +217,17 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = NO -# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line # such as # /*************** # as being the beginning of a Javadoc-style comment "banner". If set to NO, the # Javadoc-style will behave just like regular comments and it will not be -# interpreted by doxygen. +# interpreted by Doxygen. # The default value is: NO. JAVADOC_BANNER = NO -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus # requiring an explicit \brief command for a brief description.) @@ -229,7 +235,7 @@ JAVADOC_BANNER = NO QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a # multi-line C++ special comment block (i.e. a block of //! or /// comments) as # a brief description. This used to be the default behavior. The new default is # to treat a multi-line C++ comment block as a detailed description. Set this @@ -241,10 +247,10 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO -# By default Python docstrings are displayed as preformatted text and doxygen's +# By default Python docstrings are displayed as preformatted text and Doxygen's # special commands cannot be used. By setting PYTHON_DOCSTRING to NO the -# doxygen's special commands can be used and the contents of the docstring -# documentation blocks is shown as doxygen documentation. +# Doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as Doxygen documentation. # The default value is: YES. PYTHON_DOCSTRING = YES @@ -255,7 +261,7 @@ PYTHON_DOCSTRING = YES INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a new # page for each member. If set to NO, the documentation of a member will be part # of the file/class/namespace that contains it. # The default value is: NO. @@ -325,30 +331,30 @@ OPTIMIZE_OUTPUT_SLICE = NO # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript, # Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, # VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the -# default for Fortran type files). For instance to make doxygen treat .inc files +# default for Fortran type files). For instance to make Doxygen treat .inc files # as Fortran files (default is PHP), and .f files as C (default is Fortran), # use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. When specifying no_extension you should add +# the files are not read by Doxygen. When specifying no_extension you should add # * to the FILE_PATTERNS. # # Note see also the list of default file extension mappings. EXTENSION_MAPPING = -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all comments # according to the Markdown format, which allows for more readable # documentation. See https://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# The output of markdown processing is further processed by Doxygen, so you can +# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. @@ -358,7 +364,7 @@ MARKDOWN_SUPPORT = YES # to that level are automatically included in the table of contents, even if # they do not have an id attribute. # Note: This feature currently applies only to Markdown headings. -# Minimum value: 0, maximum value: 99, default value: 5. +# Minimum value: 0, maximum value: 99, default value: 6. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES. TOC_INCLUDE_HEADINGS = 5 @@ -366,15 +372,15 @@ TOC_INCLUDE_HEADINGS = 5 # The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to # generate identifiers for the Markdown headings. Note: Every identifier is # unique. -# Possible values are: DOXYGEN Use a fixed 'autotoc_md' string followed by a -# sequence number starting at 0. and GITHUB Use the lower case version of title -# with any whitespace replaced by '-' and punctations characters removed.. +# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0 and GITHUB use the lower case version of title +# with any whitespace replaced by '-' and punctuation characters removed. # The default value is: DOXYGEN. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES. MARKDOWN_ID_STYLE = GITHUB -# When enabled doxygen tries to link words that correspond to documented +# When enabled Doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or # globally by setting AUTOLINK_SUPPORT to NO. @@ -384,10 +390,10 @@ AUTOLINK_SUPPORT = YES # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and +# tag to YES in order to let Doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. +# versus func(std::string) {}). This also makes the inheritance and +# collaboration diagrams that involve STL classes more complete and accurate. # The default value is: NO. BUILTIN_STL_SUPPORT = NO @@ -399,16 +405,16 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. +# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse +# them like normal C++ but will assume all classes use public instead of private +# inheritance when no explicit protection keyword is present. # The default value is: NO. SIP_SUPPORT = NO # For Microsoft's IDL there are propget and propput attributes to indicate # getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. +# Doxygen to replace the get and set methods by a property in the documentation. # This will only work if the methods are indeed getting or setting a simple # type. If this is not the case, or you want to show the methods anyway, you # should set this option to NO. @@ -417,7 +423,7 @@ SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first +# tag is set to YES then Doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. @@ -475,18 +481,18 @@ TYPEDEF_HIDES_STRUCT = NO # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This # cache is used to resolve symbols given their name and scope. Since this can be # an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The +# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# Doxygen will become slower. If the cache is too large, memory is wasted. The # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest +# symbols. At the end of a run Doxygen will report the cache usage and suggest # the optimal cache size from a speed point of view. # Minimum value: 0, maximum value: 9, default value: 0. LOOKUP_CACHE_SIZE = 0 -# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use -# during processing. When set to 0 doxygen will based this on the number of +# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to use +# during processing. When set to 0 Doxygen will based this on the number of # cores available in the system. You can set it explicitly to a value larger # than 0 to get more control over the balance between CPU load and processing # speed. At this moment only the input processing can be done using multiple @@ -510,7 +516,7 @@ TIMESTAMP = DATE # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. @@ -576,7 +582,7 @@ EXTRACT_ANON_NSPACES = NO RESOLVE_UNNAMED_PARAMS = YES -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation # section is generated. This option has no effect if EXTRACT_ALL is enabled. @@ -584,7 +590,7 @@ RESOLVE_UNNAMED_PARAMS = YES HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option # will also hide undocumented C++ concepts if enabled. This option has no effect @@ -593,14 +599,14 @@ HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend # declarations. If set to NO, these declarations will be included in the # documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. @@ -614,7 +620,7 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be # able to match the capabilities of the underlying filesystem. In case the # filesystem is case sensitive (i.e. it supports files in the same directory # whose names only differ in casing), the option must be set to YES to properly @@ -623,7 +629,7 @@ INTERNAL_DOCS = NO # output files written for symbols that only differ in casing, such as for two # classes, one named CLASS and the other named Class, and to also support # references to files without having to specify the exact matching casing. On -# Windows (including Cygwin) and MacOS, users should typically set this option +# Windows (including Cygwin) and macOS, users should typically set this option # to NO, whereas on Linux or other Unix flavors it should typically be set to # YES. # Possible values are: SYSTEM, NO and YES. @@ -631,14 +637,14 @@ INTERNAL_DOCS = NO CASE_SENSE_NAMES = SYSTEM -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will # append additional text to a page's title, such as Class Reference. If set to # YES the compound reference will be hidden. # The default value is: NO. @@ -651,7 +657,7 @@ HIDE_COMPOUND_REFERENCE= NO SHOW_HEADERFILE = YES -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -664,7 +670,7 @@ SHOW_INCLUDE_FILES = YES SHOW_GROUPED_MEMB_INC = NO -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -676,14 +682,14 @@ FORCE_LOCAL_INCLUDES = NO INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. @@ -691,7 +697,7 @@ SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the # (brief and detailed) documentation of class members so that constructors and # destructors are listed first. If set to NO the constructors will appear in the # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. @@ -703,7 +709,7 @@ SORT_BRIEF_DOCS = NO SORT_MEMBERS_CTORS_1ST = NO -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the hierarchy # of group names into alphabetical order. If set to NO the group names will # appear in their defined order. # The default value is: NO. @@ -720,11 +726,11 @@ SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper # type resolution of all parameters of a function it will reject a match between # the prototype and the implementation of a member function even if there is # only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still # accept a match between prototype and implementation in such cases. # The default value is: NO. @@ -794,25 +800,25 @@ SHOW_FILES = YES SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from +# Doxygen should invoke to get the current version for each file (typically from # the version control system). Doxygen will invoke the program by executing (via # popen()) the command command input-file, where command is the value of the # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file +# by Doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated +# by Doxygen. The layout file controls the global structure of the generated # output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can +# that represents Doxygen's defaults, run Doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml # will be used as the name of the layout file. See also section "Changing the # layout of pages" for information. # -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# Note that if you run Doxygen from a directory containing a file called +# DoxygenLayout.xml, Doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. LAYOUT_FILE = @@ -827,19 +833,35 @@ LAYOUT_FILE = CITE_BIB_FILES = +# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH +# environment variable) so that external tools such as latex and gs can be +# found. +# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the +# path already specified by the PATH variable, and are added in the order +# specified. +# Note: This option is particularly useful for macOS version 14 (Sonoma) and +# higher, when running Doxygen from Doxywizard, because in this case any user- +# defined changes to the PATH are ignored. A typical example on macOS is to set +# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin +# together with the standard path, the full search path used by doxygen when +# launching external tools will then become +# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin + +EXTERNAL_TOOL_PATH = + #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the +# standard output by Doxygen. If QUIET is set to YES this implies that the # messages are off. # The default value is: NO. QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. @@ -847,14 +869,14 @@ QUIET = NO WARNINGS = YES -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. WARN_IF_UNDOCUMENTED = YES -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings for # potential errors in the documentation, such as documenting some parameters in # a documented function twice, or documenting parameters that don't exist or # using markup commands wrongly. @@ -862,8 +884,8 @@ WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES -# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete -# function parameter documentation. If set to NO, doxygen will accept that some +# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete +# function parameter documentation. If set to NO, Doxygen will accept that some # parameters have no documentation without warning. # The default value is: YES. @@ -871,7 +893,7 @@ WARN_IF_INCOMPLETE_DOC = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong parameter +# value. If set to NO, Doxygen will only warn about wrong parameter # documentation, but not about the absence of documentation. If EXTRACT_ALL is # set to YES then this flag will automatically be disabled. See also # WARN_IF_INCOMPLETE_DOC @@ -879,20 +901,20 @@ WARN_IF_INCOMPLETE_DOC = YES WARN_NO_PARAMDOC = NO -# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about -# undocumented enumeration values. If set to NO, doxygen will accept +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about +# undocumented enumeration values. If set to NO, Doxygen will accept # undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: NO. WARN_IF_UNDOC_ENUM_VAL = NO -# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop when # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS -# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but -# at the end of the doxygen process doxygen will return with a non-zero status. -# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves -# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not +# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the Doxygen process Doxygen will return with a non-zero status. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not # write the warning messages in between other messages but write them at the end # of a run, in case a WARN_LOGFILE is defined the warning messages will be # besides being in the defined file also be shown at the end of a run, unless @@ -903,7 +925,7 @@ WARN_IF_UNDOC_ENUM_VAL = NO WARN_AS_ERROR = NO -# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# The WARN_FORMAT tag determines the format of the warning messages that Doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated # and the warning text. Optionally the format may contain $version, which will @@ -916,7 +938,7 @@ WARN_FORMAT = "$file:$line: $text" # In the $text part of the WARN_FORMAT command it is possible that a reference # to a more specific place is given. To make it easier to jump to this place -# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# (outside of Doxygen) the user can define a custom "cut" / "paste" string. # Example: # WARN_LINE_FORMAT = "'vi $file +$line'" # See also: WARN_FORMAT @@ -949,7 +971,7 @@ INPUT = README.MD \ ./third-party-libs/QR-Code-generator/cpp/qrcodegen.hpp # This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: # https://www.gnu.org/software/libiconv/) for the list of possible encodings. @@ -959,12 +981,12 @@ INPUT = README.MD \ INPUT_ENCODING = UTF-8 # This tag can be used to specify the character encoding of the source files -# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# that Doxygen parses The INPUT_FILE_ENCODING tag can be used to specify # character encoding on a per file pattern basis. Doxygen will compare the file # name with each pattern and apply the encoding instead of the default # INPUT_ENCODING) if there is a match. The character encodings are a list of the -# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding -# "INPUT_ENCODING" for further information on supported encodings. +# form: pattern=encoding (like *.php=ISO-8859-1). +# See also: INPUT_ENCODING for further information on supported encodings. INPUT_FILE_ENCODING = @@ -974,17 +996,17 @@ INPUT_FILE_ENCODING = # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# read by doxygen. +# read by Doxygen. # # Note the list of default checked file patterns might differ from the list of # default file extension mappings. # -# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, -# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, -# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C -# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, -# *.vhdl, *.ucf, *.qsf and *.ice. +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, +# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, +# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, +# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to +# be provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.cc \ @@ -1043,7 +1065,7 @@ RECURSIVE = YES # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. # -# Note that relative paths are relative to the directory from which doxygen is +# Note that relative paths are relative to the directory from which Doxygen is # run. EXCLUDE = @@ -1098,7 +1120,7 @@ EXAMPLE_RECURSIVE = NO IMAGE_PATH = -# The INPUT_FILTER tag can be used to specify a program that doxygen should +# The INPUT_FILTER tag can be used to specify a program that Doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command: # @@ -1113,14 +1135,14 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # -# Note that doxygen will use the data processed and written to standard output +# Note that Doxygen will use the data processed and written to standard output # for further processing, therefore nothing else, like debug statements or used # commands (so in case of a Windows batch file always use @echo OFF), should be # written to standard output. # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. +# properly processed by Doxygen. INPUT_FILTER = @@ -1133,7 +1155,7 @@ INPUT_FILTER = # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. +# properly processed by Doxygen. FILTER_PATTERNS = @@ -1155,7 +1177,7 @@ FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. +# and want to reuse the introduction page also for the Doxygen output. USE_MDFILE_AS_MAINPAGE = README.MD @@ -1182,12 +1204,13 @@ FORTRAN_COMMENT_AFTER = 72 SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. +# multi-line macros, enums or list initialized variables directly into the +# documentation. # The default value is: NO. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any # special comment blocks from generated source code fragments. Normal C, C++ and # Fortran comments will always remain visible. # The default value is: YES. @@ -1225,7 +1248,7 @@ REFERENCES_LINK_SOURCE = YES SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# point to the HTML generated by the htags(1) tool instead of Doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system # (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. @@ -1239,14 +1262,14 @@ SOURCE_TOOLTIPS = YES # Doxygen will invoke htags (and that will in turn invoke gtags), so these # tools must be available from the command line (i.e. in the search path). # -# The result: instead of the source browser generated by doxygen, the links to +# The result: instead of the source browser generated by Doxygen, the links to # source code will now point to the output of htags. # The default value is: NO. # This tag requires that the tag SOURCE_BROWSER is set to YES. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a # verbatim copy of the header file for each class for which an include is # specified. Set to NO to disable this. # See also: Section \class. @@ -1254,19 +1277,19 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# If the CLANG_ASSISTED_PARSING tag is set to YES then Doxygen will use the # clang parser (see: # http://clang.llvm.org/) for more accurate parsing at the cost of reduced # performance. This can be particularly helpful with template rich C++ code for -# which doxygen's built-in parser lacks the necessary type information. -# Note: The availability of this option depends on whether or not doxygen was +# which Doxygen's built-in parser lacks the necessary type information. +# Note: The availability of this option depends on whether or not Doxygen was # generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO # If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS -# tag is set to YES then doxygen will add the directory of each input to the +# tag is set to YES then Doxygen will add the directory of each input to the # include path. # The default value is: YES. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. @@ -1275,7 +1298,7 @@ CLANG_ADD_INC_PATHS = YES # If clang assisted parsing is enabled you can provide the compiler with command # line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories +# the include paths will already be set by Doxygen for the files and directories # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. @@ -1289,7 +1312,7 @@ CLANG_OPTIONS = # specifying the -p option to a clang tool, such as clang-check. These options # will then be passed to the parser. Any options specified with CLANG_OPTIONS # will be added as well. -# Note: The availability of this option depends on whether or not doxygen was +# Note: The availability of this option depends on whether or not Doxygen was # generated with the -Duse_libclang=ON option for CMake. CLANG_DATABASE_PATH = @@ -1318,7 +1341,7 @@ IGNORE_PREFIX = # Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES @@ -1339,40 +1362,40 @@ HTML_OUTPUT = ./ HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a +# each generated HTML page. If the tag is left blank Doxygen will generate a # standard header. # # To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. +# that Doxygen needs, which is dependent on the configuration options used (e.g. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a # default header using # doxygen -w html new_header.html new_footer.html new_stylesheet.css # YourConfigFile # and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally +# for information on how to generate the default header that Doxygen normally # uses. # Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description +# default header when upgrading to a newer version of Doxygen. For a description # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_HEADER = doxygen/header.html # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard +# generated HTML page. If the tag is left blank Doxygen will generate a standard # footer. See HTML_HEADER for more information on how to generate a default # footer and what special commands can be used inside the footer. See also # section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. +# that Doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. +# the HTML output. If left blank Doxygen will generate a default style sheet. # See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. +# sheet that Doxygen normally uses. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as # it is more robust and this tag (HTML_STYLESHEET) will in the future become # obsolete. @@ -1382,7 +1405,7 @@ HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. +# created by Doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the # standard style sheet and is therefore more robust against future updates. # Doxygen will copy the style sheet files to the output directory. @@ -1397,8 +1420,8 @@ HTML_STYLESHEET = # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = doxygen-awesome-css/doxygen-awesome.css \ - doxygen-awesome-css/doxygen-awesome-sidebar-only.css \ - doxygen-awesome-css/doxygen-awesome-sidebar-only-darkmode-toggle.css + doxygen-awesome-css/doxygen-awesome-sidebar-only.css \ + doxygen-awesome-css/doxygen-awesome-sidebar-only-darkmode-toggle.css # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1409,17 +1432,17 @@ HTML_EXTRA_STYLESHEET = doxygen-awesome-css/doxygen-awesome.css \ # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_FILES = doxygen-awesome-css/doxygen-awesome-darkmode-toggle.js \ - doxygen-awesome-css/doxygen-awesome-fragment-copy-button.js \ - doxygen-awesome-css/doxygen-awesome-paragraph-link.js \ - doxygen-awesome-css/doxygen-awesome-interactive-toc.js + doxygen-awesome-css/doxygen-awesome-fragment-copy-button.js \ + doxygen-awesome-css/doxygen-awesome-paragraph-link.js \ + doxygen-awesome-css/doxygen-awesome-interactive-toc.js # The HTML_COLORSTYLE tag can be used to specify if the generated HTML output # should be rendered with a dark or light theme. -# Possible values are: LIGHT always generate light mode output, DARK always -# generate dark mode output, AUTO_LIGHT automatically set the mode according to -# the user preference, use light mode if no preference is set (the default), -# AUTO_DARK automatically set the mode according to the user preference, use -# dark mode if no preference is set and TOGGLE allow to user to switch between +# Possible values are: LIGHT always generates light mode output, DARK always +# generates dark mode output, AUTO_LIGHT automatically sets the mode according +# to the user preference, uses light mode if no preference is set (the default), +# AUTO_DARK automatically sets the mode according to the user preference, uses +# dark mode if no preference is set and TOGGLE allows a user to switch between # light and dark mode via a button. # The default value is: AUTO_LIGHT. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1475,6 +1498,33 @@ HTML_DYNAMIC_MENUS = YES HTML_DYNAMIC_SECTIONS = NO +# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be +# dynamically folded and expanded in the generated HTML source code. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_CODE_FOLDING = YES + +# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon in +# the top right corner of code and text fragments that allows the user to copy +# its content to the clipboard. Note this only works if supported by the browser +# and the web page is served via a secure context (see: +# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file: +# protocol. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COPY_CLIPBOARD = YES + +# Doxygen stores a couple of settings persistently in the browser (via e.g. +# cookies). By default these settings apply to all HTML pages generated by +# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store +# the settings under a project specific key, such that the user preferences will +# be stored separately. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_PROJECT_COOKIE = + # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to @@ -1492,7 +1542,7 @@ HTML_INDEX_NUM_ENTRIES = 100 # generated that can be used as input for Apple's Xcode 3 integrated development # environment (see: # https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To -# create a documentation set, doxygen will generate a Makefile in the HTML +# create a documentation set, Doxygen will generate a Makefile in the HTML # output directory. Running make will produce the docset in that directory and # running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at @@ -1540,7 +1590,7 @@ DOCSET_PUBLISHER_ID = org.doxygen.Publisher DOCSET_PUBLISHER_NAME = Publisher -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop # on Windows. In the beginning of 2021 Microsoft took the original page, with @@ -1551,7 +1601,7 @@ DOCSET_PUBLISHER_NAME = Publisher # ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML # files are now used as the Windows 98 help format, and will replace the old # Windows help format (.hlp) on all Windows platforms in the future. Compressed # HTML files also contain an index, a table of contents, and you can search for @@ -1571,7 +1621,7 @@ CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. +# Doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1673,7 +1723,7 @@ QHP_CUST_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location (absolute path -# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to # run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1718,7 +1768,7 @@ DISABLE_INDEX = NO # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine tune the look of the index (see "Fine-tuning the output"). As an -# example, the default style sheet generated by doxygen has an example that +# example, the default style sheet generated by Doxygen has an example that # shows how to put an image at the root of the tree instead of the PROJECT_NAME. # Since the tree basically has the same information as the tab index, you could # consider setting DISABLE_INDEX to YES when enabling this option. @@ -1740,7 +1790,7 @@ GENERATE_TREEVIEW = YES FULL_SIDEBAR = NO # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. +# Doxygen will group on one line in the generated HTML documentation. # # Note that a value of 0 will completely suppress the enum values from appearing # in the overview section. @@ -1749,6 +1799,12 @@ FULL_SIDEBAR = NO ENUM_VALUES_PER_LINE = 4 +# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified +# enumeration values besides the enumeration mnemonics. +# The default value is: NO. + +SHOW_ENUM_VALUES = NO + # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used # to set the initial width (in pixels) of the frame in which the tree is shown. # Minimum value: 0, maximum value: 1500, default value: 250. @@ -1756,21 +1812,21 @@ ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO -# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email # addresses. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. OBFUSCATE_EMAILS = YES -# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see # https://inkscape.org) to generate formulas as SVG images instead of PNGs for # the HTML output. These images will generally look nicer at scaled resolutions. @@ -1783,7 +1839,7 @@ HTML_FORMULA_FORMAT = png # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML +# Doxygen run you need to manually remove any form_*.png images from the HTML # output directory to force them to be regenerated. # Minimum value: 8, maximum value: 50, default value: 10. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1827,7 +1883,7 @@ MATHJAX_VERSION = MathJax_2 # Possible values are: HTML-CSS (which is slower, but has the best # compatibility. This is the name for Mathjax version 2, for MathJax version 3 # this will be translated into chtml), NativeMML (i.e. MathML. Only supported -# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This # is the name for Mathjax version 3, for MathJax version 2 this will be # translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. @@ -1861,7 +1917,7 @@ MATHJAX_RELPATH = MATHJAX_EXTENSIONS = -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces # of code that will be used on startup of the MathJax code. See the MathJax site # (see: # http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an @@ -1870,12 +1926,12 @@ MATHJAX_EXTENSIONS = MATHJAX_CODEFILE = -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and +# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for +# the HTML output. The underlying search engine uses JavaScript and DHTML and # should work on any modern browser. Note that when using HTML help # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) # there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then +# For large projects the JavaScript based search engine can be slow, then # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to # search using the keyboard; to jump to the search box use + S # (what the is depends on the OS and browser, but it is typically @@ -1894,7 +1950,7 @@ SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH -# setting. When disabled, doxygen will generate a PHP script for searching and +# setting. When disabled, Doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing # and searching needs to be provided by external tools. See the section # "External Indexing and Searching" for details. @@ -1903,7 +1959,7 @@ SEARCHENGINE = YES SERVER_BASED_SEARCH = NO -# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# When EXTERNAL_SEARCH tag is enabled Doxygen will no longer generate the PHP # script for searching. Instead the search results are written to an XML file # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain the @@ -1948,7 +2004,7 @@ SEARCHDATA_FILE = searchdata.xml EXTERNAL_SEARCH_ID = -# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through Doxygen # projects other than the one defined by this configuration file, but that are # all added to the same external search index. Each project needs to have a # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of @@ -1962,7 +2018,7 @@ EXTRA_SEARCH_MAPPINGS = # Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# If the GENERATE_LATEX tag is set to YES, Doxygen will generate LaTeX output. # The default value is: YES. GENERATE_LATEX = NO @@ -2007,7 +2063,7 @@ MAKEINDEX_CMD_NAME = makeindex LATEX_MAKEINDEX_CMD = makeindex -# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# If the COMPACT_LATEX tag is set to YES, Doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -2038,15 +2094,15 @@ EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for # the generated LaTeX document. The header should contain everything until the -# first chapter. If it is left blank doxygen will generate a standard header. It +# first chapter. If it is left blank Doxygen will generate a standard header. It # is highly recommended to start with a default header using # doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty # and then modify the file new_header.tex. See also section "Doxygen usage" for -# information on how to generate the default header that doxygen normally uses. +# information on how to generate the default header that Doxygen normally uses. # # Note: Only use a user-defined header if you know what you are doing! # Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. The following +# default header when upgrading to a newer version of Doxygen. The following # commands have a special meaning inside the header (and footer): For a # description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2055,10 +2111,10 @@ LATEX_HEADER = # The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for # the generated LaTeX document. The footer should contain everything after the -# last chapter. If it is left blank doxygen will generate a standard footer. See +# last chapter. If it is left blank Doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what # special commands can be used inside the footer. See also section "Doxygen -# usage" for information on how to generate the default footer that doxygen +# usage" for information on how to generate the default footer that Doxygen # normally uses. Note: Only use a user-defined footer if you know what you are # doing! # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2067,7 +2123,7 @@ LATEX_FOOTER = # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined # LaTeX style sheets that are included after the standard style sheets created -# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# by Doxygen. Using this option one can overrule certain style aspects. Doxygen # will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the @@ -2093,7 +2149,7 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# If the USE_PDFLATEX tag is set to YES, Doxygen will use the engine as # specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX # files. Set this option to YES, to get a higher quality PDF documentation. # @@ -2103,7 +2159,7 @@ PDF_HYPERLINKS = YES USE_PDFLATEX = YES -# The LATEX_BATCHMODE tag ignals the behavior of LaTeX in case of an error. +# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error. # Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch # mode nothing is printed on the terminal, errors are scrolled as if is # hit at every error; missing files that TeX tries to input or request from @@ -2118,7 +2174,7 @@ USE_PDFLATEX = YES LATEX_BATCHMODE = NO -# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# If the LATEX_HIDE_INDICES tag is set to YES then Doxygen will not include the # index chapters (such as File Index, Compound Index, etc.) in the output. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2145,7 +2201,7 @@ LATEX_EMOJI_DIRECTORY = # Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# If the GENERATE_RTF tag is set to YES, Doxygen will generate RTF output. The # RTF output is optimized for Word 97 and may not look too pretty with other RTF # readers/editors. # The default value is: NO. @@ -2160,7 +2216,7 @@ GENERATE_RTF = NO RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# If the COMPACT_RTF tag is set to YES, Doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -2180,28 +2236,36 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's +# Load stylesheet definitions from file. Syntax is similar to Doxygen's # configuration file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the -# default style sheet that doxygen normally uses. +# default style sheet that Doxygen normally uses. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's configuration file. A template extensions file can be +# similar to Doxygen's configuration file. A template extensions file can be # generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = +# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the RTF_OUTPUT output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTRA_FILES = + #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# If the GENERATE_MAN tag is set to YES, Doxygen will generate man pages for # classes and files. # The default value is: NO. @@ -2232,7 +2296,7 @@ MAN_EXTENSION = .3 MAN_SUBDIR = -# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without # them the man command would be unable to find the correct page. @@ -2245,7 +2309,7 @@ MAN_LINKS = NO # Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# If the GENERATE_XML tag is set to YES, Doxygen will generate an XML file that # captures the structure of the code including all documentation. # The default value is: NO. @@ -2259,7 +2323,7 @@ GENERATE_XML = NO XML_OUTPUT = xml -# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# If the XML_PROGRAMLISTING tag is set to YES, Doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size # of the XML output. @@ -2268,7 +2332,7 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES -# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, Doxygen will include # namespace members in file scope as well, matching the HTML output. # The default value is: NO. # This tag requires that the tag GENERATE_XML is set to YES. @@ -2279,7 +2343,7 @@ XML_NS_MEMB_FILE_SCOPE = NO # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- -# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# If the GENERATE_DOCBOOK tag is set to YES, Doxygen will generate Docbook files # that can be used to generate PDF. # The default value is: NO. @@ -2297,7 +2361,7 @@ DOCBOOK_OUTPUT = docbook # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# If the GENERATE_AUTOGEN_DEF tag is set to YES, Doxygen will generate an # AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures # the structure of the code including all documentation. Note that this feature # is still experimental and incomplete at the moment. @@ -2305,11 +2369,37 @@ DOCBOOK_OUTPUT = docbook GENERATE_AUTOGEN_DEF = NO +#--------------------------------------------------------------------------- +# Configuration options related to Sqlite3 output +#--------------------------------------------------------------------------- + +# If the GENERATE_SQLITE3 tag is set to YES Doxygen will generate a Sqlite3 +# database with symbols found by Doxygen stored in tables. +# The default value is: NO. + +GENERATE_SQLITE3 = NO + +# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be +# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put +# in front of it. +# The default directory is: sqlite3. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_OUTPUT = sqlite3 + +# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db +# database file will be recreated with each Doxygen run. If set to NO, Doxygen +# will warn if a database file is already found and not modify it. +# The default value is: YES. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_RECREATE_DB = YES + #--------------------------------------------------------------------------- # Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# If the GENERATE_PERLMOD tag is set to YES, Doxygen will generate a Perl module # file that captures the structure of the code including all documentation. # # Note that this feature is still experimental and incomplete at the moment. @@ -2317,7 +2407,7 @@ GENERATE_AUTOGEN_DEF = NO GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# If the PERLMOD_LATEX tag is set to YES, Doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI # output from the Perl module output. # The default value is: NO. @@ -2347,13 +2437,13 @@ PERLMOD_MAKEVAR_PREFIX = # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# If the ENABLE_PREPROCESSING tag is set to YES, Doxygen will evaluate all # C-preprocessor directives found in the sources and include files. # The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# If the MACRO_EXPANSION tag is set to YES, Doxygen will expand all macro names # in the source code. If set to NO, only conditional compilation will be # performed. Macro expansion can be done in a controlled way by setting # EXPAND_ONLY_PREDEF to YES. @@ -2412,7 +2502,7 @@ PREDEFINED = EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# If the SKIP_FUNCTION_MACROS tag is set to YES then Doxygen's preprocessor will # remove all references to function-like macros that are alone on a line, have # an all uppercase name, and do not end with a semicolon. Such function macros # are typically used for boiler-plate code, and will confuse the parser if not @@ -2436,26 +2526,26 @@ SKIP_FUNCTION_MACROS = YES # section "Linking to external documentation" for more information about the use # of tag files. # Note: Each tag file must have a unique name (where the name does NOT include -# the path). If a tag file is not located in the directory in which doxygen is +# the path). If a tag file is not located in the directory in which Doxygen is # run, you must also specify the path to the tagfile here. TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# When a file name is specified after GENERATE_TAGFILE, Doxygen will create a # tag file that is based on the input files it reads. See section "Linking to # external documentation" for more information about the usage of tag files. GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES, all external class will be listed in -# the class index. If set to NO, only the inherited external classes will be -# listed. +# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces +# will be listed in the class and namespace index. If set to NO, only the +# inherited external classes will be listed. # The default value is: NO. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will be +# in the topic index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. @@ -2478,7 +2568,7 @@ EXTERNAL_PAGES = YES HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# If you set the HAVE_DOT tag to YES then Doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: # https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is @@ -2487,8 +2577,8 @@ HIDE_UNDOC_RELATIONS = YES HAVE_DOT = YES -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed -# to run in parallel. When set to 0 doxygen will base this on the number of +# The DOT_NUM_THREADS specifies the number of dot invocations Doxygen is allowed +# to run in parallel. When set to 0 Doxygen will base this on the number of # processors available in the system. You can set it explicitly to a value # larger than 0 to get control over the balance between CPU load and processing # speed. @@ -2499,7 +2589,7 @@ DOT_NUM_THREADS = 0 # DOT_COMMON_ATTR is common attributes for nodes, edges and labels of # subgraphs. When you want a differently looking font in the dot files that -# doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# Doxygen generates you can specify fontname, fontcolor and fontsize attributes. # For details please see Node, # Edge and Graph Attributes specification You need to make sure dot is able # to find the font, which can be done by putting it in a standard location or by @@ -2533,37 +2623,47 @@ DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will +# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then Doxygen will # generate a graph for each documented class showing the direct and indirect # inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and # HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case # the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the # CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. # If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance -# relations will be shown as texts / links. +# relations will be shown as texts / links. Explicit enabling an inheritance +# graph or choosing a different representation for an inheritance graph of a +# specific class, can be accomplished by means of the command \inheritancegraph. +# Disabling an inheritance graph can be accomplished by means of the command +# \hideinheritancegraph. # Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. # The default value is: YES. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# If the COLLABORATION_GRAPH tag is set to YES then Doxygen will generate a # graph for each documented class showing the direct and indirect implementation # dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. +# class with other documented classes. Explicit enabling a collaboration graph, +# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the +# command \collaborationgraph. Disabling a collaboration graph can be +# accomplished by means of the command \hidecollaborationgraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. See also the chapter Grouping -# in the manual. +# If the GROUP_GRAPHS tag is set to YES then Doxygen will generate a graph for +# groups, showing the direct groups dependencies. Explicit enabling a group +# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means +# of the command \groupgraph. Disabling a directory graph can be accomplished by +# means of the command \hidegroupgraph. See also the chapter Grouping in the +# manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# If the UML_LOOK tag is set to YES, Doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. # The default value is: NO. @@ -2584,10 +2684,10 @@ UML_LOOK = NO UML_LIMIT_NUM_FIELDS = 10 -# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# If the DOT_UML_DETAILS tag is set to NO, Doxygen will show attributes and # methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS -# tag is set to YES, doxygen will add type and arguments for attributes and -# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# tag is set to YES, Doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, Doxygen # will not generate fields with class member information in the UML graphs. The # class diagrams will look similar to the default class diagrams but using UML # notation for the relationships. @@ -2599,8 +2699,8 @@ DOT_UML_DETAILS = NO # The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters # to display on a single line. If the actual line length exceeds this threshold -# significantly it will wrapped across multiple lines. Some heuristics are apply -# to avoid ugly line breaks. +# significantly it will be wrapped across multiple lines. Some heuristics are +# applied to avoid ugly line breaks. # Minimum value: 0, maximum value: 1000, default value: 17. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2615,24 +2715,29 @@ DOT_WRAP_THRESHOLD = 17 TEMPLATE_RELATIONS = NO # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to -# YES then doxygen will generate a graph for each documented file showing the +# YES then Doxygen will generate a graph for each documented file showing the # direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO, +# can be accomplished by means of the command \includegraph. Disabling an +# include graph can be accomplished by means of the command \hideincludegraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. INCLUDE_GRAPH = YES # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are -# set to YES then doxygen will generate a graph for each documented file showing +# set to YES then Doxygen will generate a graph for each documented file showing # the direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set +# to NO, can be accomplished by means of the command \includedbygraph. Disabling +# an included by graph can be accomplished by means of the command +# \hideincludedbygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# If the CALL_GRAPH tag is set to YES then Doxygen will generate a call # dependency graph for every global function or class method. # # Note that enabling this option will significantly increase the time of a run. @@ -2644,7 +2749,7 @@ INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO -# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# If the CALLER_GRAPH tag is set to YES then Doxygen will generate a caller # dependency graph for every global function or class method. # # Note that enabling this option will significantly increase the time of a run. @@ -2656,17 +2761,20 @@ CALL_GRAPH = NO CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# If the GRAPHICAL_HIERARCHY tag is set to YES then Doxygen will graphical # hierarchy of all classes instead of a textual one. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# If the DIRECTORY_GRAPH tag is set to YES then Doxygen will show the # dependencies a directory has on other directories in a graphical way. The # dependency relations are determined by the #include relations between the -# files in the directories. +# files in the directories. Explicit enabling a directory graph, when +# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command +# \directorygraph. Disabling a directory graph can be accomplished by means of +# the command \hidedirectorygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2719,7 +2827,7 @@ DOT_PATH = DOTFILE_DIRS = -# You can include diagrams made with dia in doxygen documentation. Doxygen will +# You can include diagrams made with dia in Doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. # If left empty dia is assumed to be found in the default search path. @@ -2732,7 +2840,7 @@ DIA_PATH = DIAFILE_DIRS = -# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# When using PlantUML, the PLANTUML_JAR_PATH tag should be used to specify the # path where java can find the plantuml.jar file or to the filename of jar file # to be used. If left blank, it is assumed PlantUML is not used or called during # a preprocessing step. Doxygen will generate a warning when it encounters a @@ -2740,20 +2848,20 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = -# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a -# configuration file for plantuml. +# When using PlantUML, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for PlantUML. PLANTUML_CFG_FILE = -# When using plantuml, the specified paths are searched for files specified by -# the !include statement in a plantuml block. +# When using PlantUML, the specified paths are searched for files specified by +# the !include statement in a PlantUML block. PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes -# larger than this value, doxygen will truncate the graph, which is visualized -# by representing a node as a red box. Note that doxygen if the number of direct +# larger than this value, Doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that if the number of direct # children of the root node in a graph is already larger than # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. @@ -2783,17 +2891,17 @@ MAX_DOT_GRAPH_DEPTH = 0 DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# If the GENERATE_LEGEND tag is set to YES Doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. -# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# Note: This tag requires that UML_LOOK isn't set, i.e. the Doxygen internal # graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate +# If the DOT_CLEANUP tag is set to YES, Doxygen will remove the intermediate # files that are used to generate the various graphs. # # Note: This setting is not only used for dot files but also for msc temporary @@ -2802,11 +2910,11 @@ GENERATE_LEGEND = YES DOT_CLEANUP = YES -# You can define message sequence charts within doxygen comments using the \msc -# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will +# You can define message sequence charts within Doxygen comments using the \msc +# command. If the MSCGEN_TOOL tag is left empty (the default), then Doxygen will # use a built-in version of mscgen tool to produce the charts. Alternatively, # the MSCGEN_TOOL tag can also specify the name an external tool. For instance, -# specifying prog as the value, doxygen will call the tool as prog -T +# specifying prog as the value, Doxygen will call the tool as prog -T # -o . The external tool should support # output file formats "png", "eps", "svg", and "ismap".