Skip to content

Latest commit

 

History

History
142 lines (110 loc) · 4.6 KB

README.md

File metadata and controls

142 lines (110 loc) · 4.6 KB
Raw

Power-supply-noise-aware test pattern timing analysis and regeneration

Indroduction

This framework contain several excution files

  • sim_test : Run time-logic simulation
  • idea_test : Run idea simulation and verify the results
  • pat_regene : Run pattern regeneration to maintain fault coverage
  • find_ppo : simulate ppi2 for test patterns
  • path_gene : generate spice file (with/without power grid) and perfrom HSPICE/NANOSIM simulation automatically

Input files

For basic time-logic-simulation, we need those files to perform simulation

  • circuit.v : the circuit compiled by CADENCE encounder
  • standard_library.lib : contain timing informations and internal current informations
  • pattern.pat : the pattern file is connverted from stil using fixStil.out and stil2pat.py

For idea simulation, we need all files above and other additional files:

  • circuit.dspf : the power grid RC information of the circuit and top module pin capacitance
  • circuit.spf : netlist RC informations of circuit

For pattern regeneration, we perfrom idea simulation to all patterns and find out risky patterns. So we need all files above and other files as well:

  • idea.log : idea simulation result for each pattern
  • wgl file : wgl file of the patterns set

Input files setup

The benchmark file structure should be build as follow:

  • benchmark_folder
    • circuit_name
      • circuit.v
      • circuit.pat
      • circuit.dspf
      • circuit.spf
      • circuit.wgl
      • circuit.sp
    • Library
      • library.lib
      • library.v
    • delay
      • v1.1.delay
      • v0.9.delay
      • ...

If you want to perform path generation to build SPICE files for each patterns, there are many important pre-setup:

  • change workspace directory in pkg/idea/src/path_gene.cpp: line 294 to get the correct workspace. The workspace can be anywhere you want.
  • make sure the CIRCUIT.SP have correct include files, otherwise path_gene.sh can not perform HSPICE simulation.

Usage

Perform timed-logic simulation

./script/sim_test CIRCUIT_NAME

Perform idea simulation under specific supply voltage

./script/idea_test.sh CIRCUIT_NAME VOLTAGE

Perform pattern regeneration

./script/pat_regene.sh LIB.V CIRCUIT.V CIRCUIT_NAME WGL IDEA_LOG METHOD_ID ITERATION

Simulate ppi2 for test patterns

./script/find_ppo.sh CIRCUIT_NAME

Generate spice file (with/without power grid) and perform HSPICE/NANOSIM simulation automatically

./script/path_gene.sh CIRCUIT_NAME VOLTAGE NANOSIM/HSPICE

Perform idea simulation under specific pattern file

./script/idea_log.sh CIRCUIT_NAME VOLTAGE PAT

Output File Format

For sim_test.sh idea_test.sh, find_ppo.sh and idea_lo.sh, the output only shows on terminal. (They will not generate any specific files)
For path_gene.sh, there will be a new circuit directory in the workspace you setup, which contain every SPICE simulation results of each patterns.
For pat_regene.sh, there will be a new circuit directory in the workspace you setup, it will show the regeneration result for method1 and method2 directory and each directory contain iteration directory to save logs of both ATPG and fault simulation.

Package Usage

If you want to modify the c++ files, here is the package organization:

Interface Package

Parse files to perform circuit simulations

  • verilog
  • standard delay format
  • pattern file

IR_Interface Package

Parse files related to power grid and library

  • library
  • dspf
  • spf

Core Package

Perform timed circuit simulation

  • circuit builder
  • circuit structure
  • library parser
  • library structure
  • pattern set
  • circuit simulator
  • waveform

IR Core Package

Perform power grid simulation

  • RLC component
  • power grid structure
  • power grid voltage solver

Matrix Package

KLU sparse matrix solver interface used for solving voltage

  • matrix and vector structure
  • solver

IDEA Package

Perform pattern simulation

  • verify to hspice
  • spice file generator
  • idea simulation
  • atpg regeneration

Utility Package

  • tetramax c++ interface
  • HSPICE c++ interface
  • waveform viewer

preconditions (Modify carefully!)

Here is some preconditions that I based on to write the codes. Please makesure your new codes will not violated these preconditions, otherwise the framework may crash. You need to check the code very carefully!

In path_generator.cpp:

  • pin Q ID of SDFF is 0
  • pin QN ID of SDFF is 1
  • pin SI ID of SDFF is 2
  • pin D ID of SDFF is 0

In verify.cpp:

  • assume all flip-flop name are capital

All wires and power grid nodes are translate by following rule: (Especially when you want to find a specific net by name)

  1. small case only
  2. erase every '\'
  3. change every '/' to '_'