Error after the most recent commits for TBIW #28

freznel10 · 2021-08-13T13:50:17Z

freznel10
Aug 13, 2021

Traceback (most recent call last):

File "/app/src/generate_configuration.py", line 365, in

run()

File "/app/src/dactyl_manuform.py", line 3625, in run

mod_r = model_side(side="right")

File "/app/src/dactyl_manuform.py", line 3519, in model_side

shape = union([shape, sensor])

File "/app/src/helpers_cadquery.py", line 56, in union

shape = shape.union(item)

File "/opt/conda/lib/python3.9/site-packages/cadquery/cq.py", line 3242, in union

r = r.clean()

File "/opt/conda/lib/python3.9/site-packages/cadquery/occ_impl/shapes.py", line 389, in clean

upgrader.Build()

OCP.Standard.Standard_Failure: Courbes non jointives

joshreve · 2021-08-13T21:14:01Z

joshreve
Aug 13, 2021
Maintainer

Can you send your config or json file? Mine appears to be working. I will also commit one more time just in case. The engine has issues sometimes when coplanar objects are unioned. Not sure if that is the issue or not, but I should be able to figure it out with your config.

0 replies

freznel10 · 2021-08-13T22:27:13Z

freznel10
Aug 13, 2021
Author

I pulled the latest commit and get this error: Traceback (most recent call last): File "/app/src/generate_configuration.py", line 374, in <module> run() File "/app/src/dactyl_manuform.py", line 3651, in run mod_r = model_side(side="right") File "/app/src/dactyl_manuform.py", line 3545, in model_side shape = union([shape, sensor]) File "/app/src/helpers_cadquery.py", line 56, in union shape = shape.union(item) File "/opt/conda/lib/python3.9/site-packages/cadquery/cq.py", line 3242, in union r = r.clean() File "/opt/conda/lib/python3.9/site-packages/cadquery/occ_impl/shapes.py", line 389, in clean upgrader.Build() OCP.Standard.Standard_Failure: Courbes non jointives

>>

Is this a module/dependency problem? I'm building using Docker containers. Attaching my json here. When I change the engine to solid, it builds. However, the generated file fails to render in OpenSCAD. Thanks

…

On Sat, Aug 14, 2021 at 5:14 AM Joshua Shreve ***@***.***> wrote: Can you send your config or json file? Mine appears to be working. I will also commit one more time just in case. The engine has issues sometimes when coplanar objects are unioned. Not sure if that is the issue or not, but I should be able to figure it out with your config. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUD55P5C5QDLLGUGFRUWEELT4WDKHANCNFSM5CDUGLPQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> .

1 reply

joshreve Aug 14, 2021
Maintainer

I can't find the attachment. I'm guessing there is something in the config that creates an odd geometry, but I will check to see if I can make things more robust. Can you try building with the current default config that is checked in? I have that running correctly and it will tell me if the issue is with the specific configuration or with how you configuration is operating. I just ran through docker and had to delete and recreate the containers. Not sure why they were misbehaving, but it ran after that.

Either way, a quick check of your config will tell me the issue. You can also just paste it into a reply since I don't think the attachment shows up. Or if you have it in a forked repo, I'm happy to pull it from there as well.

freznel10 · 2021-08-15T06:31:11Z

freznel10
Aug 15, 2021
Author

Here's my config: { "ENGINE": "cadquery", "save_dir": ".", "config_name": "DM", "show_caps": false, "show_pcbs": false, "nrows": 5, "ncols": 6, "alpha": 0.26179916666666664, "beta": 0.08726638888888888, "centercol": 3, "centerrow_offset": 3, "tenting_angle": 0.26179916666666664, "symmetry": "symmetric", "column_style_gt5": "orthographic", "column_style": "standard", "thumb_offsets": [ 6, -3, 7 ], "keyboard_z_offset": 11, "thumb_style": "CARBONFET", "default_1U_cluster": false, "minidox_Usize": 1.6, "thumb_plate_tr_rotation": 0.0, "thumb_plate_tl_rotation": 0.0, "thumb_plate_mr_rotation": 0.0, "thumb_plate_ml_rotation": 0.0, "thumb_plate_br_rotation": 0.0, "thumb_plate_bl_rotation": 0.0, "trackball_in_wall": true, "tbiw_hole_diameter": 36, "tbiw_hole_height": 40, "tbiw_ball_center_row": 0.2, "tbiw_translational_offset": [ 0.0, 0.0, 3 ], "tbiw_rotation_offset": [ 0.0, 0.0, 0.0 ], "tbiw_left_wall_x_offset_override": 50.0, "tbiw_left_wall_z_offset_override": 0.0, "tbiw_left_wall_lower_y_offset": 0.0, "tbiw_left_wall_lower_z_offset": 0.0, "tbiw_oled_center_row": 0.75, "tbiw_oled_translation_offset": [ -3.5, 0, 1.5 ], "tbiw_oled_rotation_offset": [ 0, 0, 0 ], "other_thumb": "DEFAULT", "tbjs_key_diameter": 64, "tbjs_translational_offsets": [ [ 0.0, 0.0, -3.0 ], [ 0.0, 0.0, -3.0 ], [ 0.0, 0.0, -3.0 ], [ 0.0, 0.0, -3.0 ] ], "tbjs_rotation_offsets": [ [ 0.0, 0.0, 0.0 ], [ 0.0, 0.0, 0.0 ], [ 0.0, 0.0, 0.0 ], [ 0.0, 0.0, 0.0 ] ], "trackball_Usize": 1.5, "trackball_rotation": 0.0, "ball_side": "right", "ball_diameter": 34.0, "ball_wall_thickness": 5.0, "ball_gap": 1.0, "ball_z_offset": -3.0, "pinky_1_5U": false, "first_1_5U_row": 0, "last_1_5U_row": 5, "extra_width": 2.5, "extra_height": 1.0, "wall_z_offset": 15, "wall_x_offset": 5, "wall_y_offset": 6, "left_wall_x_offset": 12, "left_wall_z_offset": 3, "left_wall_lower_y_offset": 0, "left_wall_lower_z_offset": 0, "wall_thickness": 4.5, "wall_base_y_thickness": 4.5, "wall_base_x_thickness": 4.5, "wall_base_back_thickness": 4.5, "fixed_angles": [ 0.17453277777777776, 0.17453277777777776, 0, 0, 0, -0.26179916666666664, -0.26179916666666664 ], "fixed_x": [ -41.5, -22.5, 0, 20.3, 41.4, 65.5, 89.6 ], "fixed_z": [ 12.1, 8.3, 0, 5, 10.7, 14.5, 17.5 ], "fixed_tenting": 0.0, "plate_style": "NOTCH", "hole_keyswitch_height": 14.0, "hole_keyswitch_width": 14.0, "nub_keyswitch_height": 14.4, "nub_keyswitch_width": 14.4, "undercut_keyswitch_height": 14.0, "undercut_keyswitch_width": 14.0, "notch_width": 5.0, "sa_profile_key_height": 12.7, "sa_length": 18.5, "sa_double_length": 37.5, "plate_thickness": 5.1, "plate_rim": 2.0, "clip_thickness": 1.4, "clip_undercut": 1.0, "undercut_transition": 0.2, "plate_file": null, "plate_offset": 0.0, "oled_mount_type": "CLIP", "oled_center_row": 1.25, "oled_translation_offset": [ 0, 0, 4 ], "oled_rotation_offset": [ 0, 0, 0 ], "oled_configurations": { "UNDERCUT": { "oled_mount_width": 15.0, "oled_mount_height": 35.0, "oled_mount_rim": 3.0, "oled_mount_depth": 6.0, "oled_mount_cut_depth": 20.0, "oled_mount_location_xyz": [ -80.0, 20.0, 45.0 ], "oled_mount_rotation_xyz": [ 13.0, 0.0, -6.0 ], "oled_left_wall_x_offset_override": 28.0, "oled_left_wall_z_offset_override": 0.0, "oled_left_wall_lower_y_offset": 12.0, "oled_left_wall_lower_z_offset": 5.0, "oled_mount_undercut": 1.0, "oled_mount_undercut_thickness": 2.0 }, "SLIDING": { "oled_mount_width": 12.5, "oled_mount_height": 25.0, "oled_mount_rim": 2.5, "oled_mount_depth": 8.0, "oled_mount_cut_depth": 20.0, "oled_mount_location_xyz": [ -78.0, 10.0, 41.0 ], "oled_mount_rotation_xyz": [ 6.0, 0.0, -3.0 ], "oled_left_wall_x_offset_override": 24.0, "oled_left_wall_z_offset_override": 0.0, "oled_left_wall_lower_y_offset": 12.0, "oled_left_wall_lower_z_offset": 5.0, "oled_thickness": 4.2, "oled_edge_overlap_end": 6.5, "oled_edge_overlap_connector": 5.5, "oled_edge_overlap_thickness": 2.5, "oled_edge_overlap_clearance": 2.5, "oled_edge_chamfer": 2.0 }, "CLIP": { "oled_mount_width": 12.5, "oled_mount_height": 39.0, "oled_mount_rim": 2.0, "oled_mount_depth": 7.0, "oled_mount_cut_depth": 20.0, "oled_mount_location_xyz": [ -78.0, 20.0, 42.0 ], "oled_mount_rotation_xyz": [ 12.0, 0.0, -6.0 ], "oled_left_wall_x_offset_override": 24.0, "oled_left_wall_z_offset_override": 0.0, "oled_left_wall_lower_y_offset": 12.0, "oled_left_wall_lower_z_offset": 5.0, "oled_thickness": 4.2, "oled_mount_bezel_thickness": 3.5, "oled_mount_bezel_chamfer": 2.0, "oled_mount_connector_hole": 6.0, "oled_screen_start_from_conn_end": 6.5, "oled_screen_length": 24.5, "oled_screen_width": 10.5, "oled_clip_thickness": 1.5, "oled_clip_width": 6.0, "oled_clip_overhang": 1.0, "oled_clip_extension": 5.0, "oled_clip_width_clearance": 0.5, "oled_clip_undercut": 0.5, "oled_clip_undercut_thickness": 2.5, "oled_clip_y_gap": 0.2, "oled_clip_z_gap": 0.2 } }, "web_thickness": 4.0, "post_size": 0.1, "post_adj": 0, "screws_offset": "INSIDE", "screw_insert_height": 3.8, "screw_insert_bottom_radius": 2.655, "screw_insert_top_radius": 2.55, "wire_post_height": 7, "wire_post_overhang": 3.5, "wire_post_diameter": 2.6, "controller_mount_type": "EXTERNAL", "external_holder_height": 12.5, "external_holder_width": 28.75, "external_holder_xoffset": -5.0, "external_holder_yoffset": -4.5, "screw_hole_diameter": 3, "base_thickness": 3.0, "base_offset": 3.0, "base_rim_thickness": 5.0, "screw_cbore_diameter": 4.0, "screw_cbore_depth": 2.0, "plate_holes": true, "plate_holes_xy_offset": [ 0.0, 0.0 ], "plate_holes_width": 14.3, "plate_holes_height": 14.3, "plate_holes_diameter": 1.7, "plate_holes_depth": 20.0, "pcb_width": 18.0, "pcb_height": 18.0, "pcb_thickness": 1.5, "pcb_hole_diameter": 2, "pcb_hole_pattern_width": 14.3, "pcb_hole_pattern_height": 14.3, "column_offsets": [ [ 0, 0, 0 ], [ 0, 0, 0 ], [ 0, 2.82, -4.5 ], [ 0, 0, 0 ], [ 0, -6, 5 ], [ 0, -6, 5 ], [ 0, -6, 5 ] ] }

…

On Sun, Aug 15, 2021 at 2:41 AM Joshua Shreve ***@***.***> wrote: I can't find the attachment. I'm guessing there is something in the config that creates an odd geometry, but I will check to see if I can make things more robust. Can you try building with the current default config that is checked in? I have that running correctly and it will tell me if the issue is with the specific configuration or with how you configuration is operating. I just ran through docker and had to delete and recreate the containers. Not sure why they were misbehaving, but it ran after that. Either way, a quick check of your config will tell me the issue. You can also just paste it into a reply since I don't think the attachment shows up. Or if you have it in a forked repo, I'm happy to pull it from there as well. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUD55P3T75F6LTA3OHD5M43T422EBANCNFSM5CDUGLPQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> .

4 replies

joshreve Aug 15, 2021
Maintainer

So good and bad, it renders for me, so it is something in your environment. If you are using Docker I would consider deleting your apps and rebuilding them. I had an issue with the Docker building and clearing them out and rebuilding fixed it quickly. If you are on a Linux host I don't have that currently setup but the same could work. If you are running on Linux let me know and I can check the setup.

I feel like it has to do with the imported files as it fails on the trackball components. You could try building with the hotswap to see if you get the same issue to narrow it down to the import process.

freznel10 Aug 17, 2021
Author

I deleted all docker containers/images and reset everything but I still get the same error for TBIW when using cadquery. When I change to solid, TBIW builds. However, it fails to render in openscad because supposedly the polygons are not closed.

joshreve Aug 17, 2021
Maintainer

What is your OS, setup, etc, maybe that will help. Are you running the master or trackball branch?

joshreve Aug 17, 2021
Maintainer

That was a stupid question since only the trackball branch has the tbiw, but the other questions stand. I'm just not sure how to troubleshoot since your file work for me. If you are on windows then I am really confused since that is my current config.

Try the hotswap sockets without the trackball. That may help me debug.

I'm assuming you pulled latest. . . Just trying to think of next steps.

I will also try a fresh clone to see if I have something in my files that is not making it into the repo properly.

freznel10 · 2021-08-17T02:10:34Z

freznel10
Aug 17, 2021
Author

Windows 10 fresh install. Docker, WSL2 backend. Building using docker. Running the trackball branch. No problems in the master branch whatsoever. Master branch works fine. Only running into errors in the trackball branch specifically TBIW. For the trackball branch: Only things I changed in the config are CARBONFET thumb cluster and TBIW set to true. It builds in solid, previews fine in openSCAD, but render fails due to unclosed polygons/mesh. For CQ, it fails to build completely and I get the errors I posted before. I did a fresh install on an new machine since installing miniconda and all other dependencies somehow messes up ZMK. So I’m using a new machine write a fresh install to do the tests. Thank you!

…

On Tue, Aug 17, 2021 at 10:04 AM Joshua Shreve ***@***.***> wrote: What is your OS, setup, etc, maybe that will help. Are you running the master or trackball branch? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUD55PZVRT4J3T7XMFDMPC3T5G7RFANCNFSM5CDUGLPQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> .

0 replies

freznel10 · 2021-08-17T02:11:40Z

freznel10
Aug 17, 2021
Author

Alright, I will try the hot swap pockets and report back.

…

On Tue, Aug 17, 2021 at 10:10 AM Freznel Sta. Ana ***@***.***> wrote: Windows 10 fresh install. Docker, WSL2 backend. Building using docker. Running the trackball branch. No problems in the master branch whatsoever. Master branch works fine. Only running into errors in the trackball branch specifically TBIW. For the trackball branch: Only things I changed in the config are CARBONFET thumb cluster and TBIW set to true. It builds in solid, previews fine in openSCAD, but render fails due to unclosed polygons/mesh. For CQ, it fails to build completely and I get the errors I posted before. I did a fresh install on an new machine since installing miniconda and all other dependencies somehow messes up ZMK. So I’m using a new machine write a fresh install to do the tests. Thank you! On Tue, Aug 17, 2021 at 10:04 AM Joshua Shreve ***@***.***> wrote: > What is your OS, setup, etc, maybe that will help. Are you running the > master or trackball branch? > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#28 (reply in thread)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AUD55PZVRT4J3T7XMFDMPC3T5G7RFANCNFSM5CDUGLPQ> > . > Triage notifications on the go with GitHub Mobile for iOS > <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> > or Android > <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> > . >

3 replies

joshreve Aug 17, 2021
Maintainer

If that fails, I'll have to think about it a bit more. If the hot swap works you can try commenting out the actual trackball geometry in the code with the failing config, but I want to see what happens with hot swap first. You could also try the trackball thumb that was just added. I'm trying to see if it has to do with the trackball itself and the imports involved.

I did a fresh clone with no issues, so it has to be with the setup. . . . One other thought, do you have odd characters in the path or an excessively long path? It might be a linux vs windows naming issue. If so, the hotswap test will fail as well.

freznel10 Aug 17, 2021
Author

The hotswap build works. I tried the trackball thumb and it works as well. Ill try to transfer directories and see if its a naming issue.

joshreve Aug 18, 2021
Maintainer

If those work, I am really not sure. Try moving it around in XY with 'tbiw_translational_offset': (0.0, 0.0, 3). Maybe you have some marginal condition. The thumb uses the same parts and is "harder" to construct, so I am a bit at a loss. Sometimes you can get weird conditions on relative positioning and tolerances when it goes to union and shifting it may break it out of that issue.

freznel10 · 2021-08-18T14:09:06Z

freznel10
Aug 18, 2021
Author

I'll try that. I'm getting a new machine and install everything fresh. Ill ty to screen record the entire process and send a link to the video.

…

On Wed, Aug 18, 2021 at 7:45 PM Joshua Shreve ***@***.***> wrote: If those work, I am really not sure. Try moving it around in XY with 'tbiw_translational_offset': (0.0, 0.0, 3). Maybe you have some marginal condition. The thumb uses the same parts and is "harder" to construct, so I am a bit at a loss. Sometimes you can get weird conditions on relative positioning and tolerances when it goes to union and shifting it may break it out of that issue. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUD55P4OCQCAMBEOTJ6PCOLT5OMMJANCNFSM5CDUGLPQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> .

0 replies

freznel10 · 2021-08-24T04:23:23Z

freznel10
Aug 24, 2021
Author

I just used the latest commit. OpenSCAD file opens fine but when ti try to render I get this error: Rendering Polygon Mesh using CGAL... ERROR: The given mesh is not closed! Unable to convert to CGAL_Nef_Polyhedron. Geometries in cache: 1938 Geometry cache size in bytes: 15725800 CGAL Polyhedrons in cache: 4 CGAL cache size in bytes: 91245328 Total rendering time: 0:03:46.781 Top level object is a 3D object: Simple: yes Vertices: 13919 Halfedges: 62934 Edges: 31467 Halffacets: 35090 Facets: 17545 Volumes: 2 Rendering finished The render has a hole where the sensor lens go. I opened the trackball models in Blender and one of them has non-manifold geometry (one of the sensor models). Im using docker a new machine.

…

On Wed, Aug 18, 2021 at 10:08 PM Freznel Sta. Ana ***@***.***> wrote: I'll try that. I'm getting a new machine and install everything fresh. Ill ty to screen record the entire process and send a link to the video. On Wed, Aug 18, 2021 at 7:45 PM Joshua Shreve ***@***.***> wrote: > If those work, I am really not sure. Try moving it around in XY with > 'tbiw_translational_offset': (0.0, 0.0, 3). Maybe you have some marginal > condition. The thumb uses the same parts and is "harder" to construct, so I > am a bit at a loss. Sometimes you can get weird conditions on relative > positioning and tolerances when it goes to union and shifting it may break > it out of that issue. > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#28 (reply in thread)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AUD55P4OCQCAMBEOTJ6PCOLT5OMMJANCNFSM5CDUGLPQ> > . > Triage notifications on the go with GitHub Mobile for iOS > <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> > or Android > <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email> > . >

2 replies

nethermead Sep 4, 2021

I ran into this today for trackball builds. The tracker_sensor_mount.stl has errors. I can render in OpenSCAD (with similar errors to the above) but generated STLs are missing the sensor holder entirely. CQ renders for me and I can get an STL out of it and I'm now trying another test print of the trackball cluster. I've tried a couple of prints before from CQ but PrusaSlicer always goes wonky near the sensor hole. The resulting prints come out ragged around the hole with a section of the holder apparently printed in mid-air. I did a couple of tweaks to the config and reoriented the cluster test to see if that helps.

joshreve Sep 11, 2021
Maintainer

I think I need to go to a simpler geometry there. I am trying to match the spec sheet, but it creates a sharp angle intersection with a revolve which seems to be a real issue when translated to stl. I know this needs fixing. I got the cadquery version to print without an issue. Ideally I will translate this to geometric functions rather than an import and it should fix these issues.

I am aware of the issue, but completing a build at the moment to find the rest of the issues before doing a full round of cleanup. If anyone is interested in recreating with the helper function selection that would be hugely useful as that will be my future intent once I get through the initial build.

Check the dev build. @freznel10 fixed the geometry so it should be better in that build. I still want to get to directly generated vs imported, but that should fix the problem until that happens (which could be a while).

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Error after the most recent commits for TBIW #28

{{title}}

Replies: 7 comments 10 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Error after the most recent commits for TBIW #28

freznel10 Aug 13, 2021

Replies: 7 comments · 10 replies

joshreve Aug 13, 2021 Maintainer

freznel10 Aug 13, 2021 Author

joshreve Aug 14, 2021 Maintainer

freznel10 Aug 15, 2021 Author

joshreve Aug 15, 2021 Maintainer

freznel10 Aug 17, 2021 Author

joshreve Aug 17, 2021 Maintainer

joshreve Aug 17, 2021 Maintainer

freznel10 Aug 17, 2021 Author

freznel10 Aug 17, 2021 Author

joshreve Aug 17, 2021 Maintainer

freznel10 Aug 17, 2021 Author

joshreve Aug 18, 2021 Maintainer

freznel10 Aug 18, 2021 Author

freznel10 Aug 24, 2021 Author

nethermead Sep 4, 2021

joshreve Sep 11, 2021 Maintainer

freznel10
Aug 13, 2021

Replies: 7 comments 10 replies

joshreve
Aug 13, 2021
Maintainer

freznel10
Aug 13, 2021
Author

joshreve Aug 14, 2021
Maintainer

freznel10
Aug 15, 2021
Author

joshreve Aug 15, 2021
Maintainer

freznel10 Aug 17, 2021
Author

joshreve Aug 17, 2021
Maintainer

joshreve Aug 17, 2021
Maintainer

freznel10
Aug 17, 2021
Author

freznel10
Aug 17, 2021
Author

joshreve Aug 17, 2021
Maintainer

freznel10 Aug 17, 2021
Author

joshreve Aug 18, 2021
Maintainer

freznel10
Aug 18, 2021
Author

freznel10
Aug 24, 2021
Author

joshreve Sep 11, 2021
Maintainer