Plugin hosting request for buildpulse-flaky-tests-plugin

[siddhantdange]

Repository URL

https://github.com/buildpulse/buildpulse-flaky-tests-plugin

New Repository Name

buildpulse-flaky-tests-plugin

Description

Our Jenkins plugin allows one to easily send test results to BuildPulse for CI analytics and flaky test detection.

GitHub users to have commit permission

@siddhantdange

Jenkins project users to have release permission

sidbuildpulse

Issue tracker

GitHub issues

[github-actions]

Hello from your friendly Jenkins Hosting Checker

It appears you have some issues with your hosting request. Please see the list below and correct all issues marked Required. Your hosting request will not be approved until these issues are corrected. Issues marked with Warning or Info are just recommendations and will not stall the hosting process.

• ⛔ Required: The following usernames in 'Jenkins project users to have release permission' need to log into Jira: sidbuildpulse (reports are re-synced hourly, wait to re-check for a bit after logging in)
• ⛔ Required: The following usernames in 'Jenkins project users to have release permission' need to log into Artifactory: sidbuildpulse (reports are re-synced hourly, wait to re-check for a bit after logging in)

You can re-trigger a check by editing your hosting request or by commenting /hosting re-check

[siddhantdange]

/hosting re-check

[github-actions]

Hello from your friendly Jenkins Hosting Checker

It looks like you have everything in order for your hosting request. A member of the Jenkins hosting team will check over things that I am not able to check(code review, README content, etc) and process the request as quickly as possible. Thank you for your patience.

Hosting team members can host this request with /hosting host

[jenkins-cert-app]

Security audit, information and commands

The security team is auditing all the hosting requests, to ensure a better security by default.

This message informs you that a Jenkins Security Scan was triggered on your repository.
It takes ~10 minutes to complete.

Commands

The bot will parse all comments, and it will check if any line start with a command.

Security team only:

• /audit-ok => the audit is complete, the hosting can continue 🎉.
• /audit-skip => the audit is not necessary, the hosting can continue 🎉.
• /audit-findings => the audit reveals some issues that require corrections ✏️.

Anyone:

• /request-security-scan => the findings from the Jenkins Security Scan were corrected, this command will re-scan your repository 🔍.
• /audit-review => the findings from the audit were corrected, this command will ping the security team to review the findings 👀. It's only applicable when the previous audit required changes.

Only one command can be requested per comment.

(automatically generated message, version: 1.28.6)

[jenkins-cert-app]

❌ Jenkins Security Scan failed.
The Security team was notified about this.

[Wadeck]

Hey @siddhantdange
I think the Security scan is failing because you do not include in the pom.xml the pluginRepository, leading to the failure to find maven-hpi-plugin:3.13 (available in the Jenkins repo)

    <pluginRepositories>
        <pluginRepository>
            <id>repo.jenkins-ci.org</id>
            <url>https://repo.jenkins-ci.org/public/</url>
        </pluginRepository>
    </pluginRepositories>

[siddhantdange]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan discovered 4 finding(s) 🔍.

Please follow the instructions below for every identified issues:

• Implement the recommended fix to address the issue.
• If you think it's a false positive, suppress the warning directly within the code.
• Alternative, you write an explanation here about why you think it's irrelevant. That will require a manual review, leading to a slower process.

After addressing the findings through one of the above methods:

• If all modifications have been made to the code, please initiate a new security scan by triggering the /request-security-scan command.
• If there are any unresolved findings (those not corrected or suppressed), request a review from the Jenkins security team by using the /audit-review command.

---

Stapler: Missing POST/RequirePOST annotation

You can find detailed information about this finding here.

BuildPulseCommand.java#60

Potential CSRF vulnerability: If BuildPulseCommand#downloadAndGetCommand connects to user-specified URLs, modifies state, or is expensive to run, it should be annotated with @POST or @RequirePOST

Stapler: Missing permission check

You can find detailed information about this finding here.

BuildPulseCommand.java#60

Potential missing permission check in BuildPulseCommand#downloadAndGetCommand

Jenkins: Plaintext password storage

You can find detailed information about this finding here.

BuildPulseStep.java#28

Field should be reviewed whether it stores a password and is serialized to disk: key

BuildPulseCommand.java#20

Field should be reviewed whether it stores a password and is serialized to disk: key

[siddhantdange]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan discovered 3 finding(s) 🔍.

Please follow the instructions below for every identified issues:

• Implement the recommended fix to address the issue.
• If you think it's a false positive, suppress the warning directly within the code.
• Alternative, you write an explanation here about why you think it's irrelevant. That will require a manual review, leading to a slower process.

After addressing the findings through one of the above methods:

• If all modifications have been made to the code, please initiate a new security scan by triggering the /request-security-scan command.
• If there are any unresolved findings (those not corrected or suppressed), request a review from the Jenkins security team by using the /audit-review command.

---

Stapler: Missing POST/RequirePOST annotation

You can find detailed information about this finding here.

BuildPulseCommand.java#63

Potential CSRF vulnerability: If BuildPulseCommand#downloadAndGetCommand connects to user-specified URLs, modifies state, or is expensive to run, it should be annotated with @POST or @RequirePOST

Stapler: Missing permission check

You can find detailed information about this finding here.

BuildPulseCommand.java#63

Potential missing permission check in BuildPulseCommand#downloadAndGetCommand

Jenkins: Plaintext password storage

You can find detailed information about this finding here.

BuildPulseStep.java#28

Field should be reviewed whether it stores a password and is serialized to disk: keyId

[siddhantdange]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan did not find anything dangerous with your plugin, congratulations! 🎉

---

💡 The Security team recommends that you are setting up the scan in your repository by following our guide.

[siddhantdange]

@NotMyFault is there any further action needed?

[NotMyFault]

I'll take a look later the week

[siddhantdange]

@mawinter69 Updated once more - will add the config.jelly as a part of a future update. By the way, I appreciate all the time you're spending here!

Also looks like when clicking on a plugin 'Available Plugins', it redirects me to the plugin documentation (plugin README)

[mawinter69]

A few more things:

• the CODEOWNERS file is .github/CODEOWNERS, so delete the one in the project root and update the one in .github
• the urls in the pom.xml are wrong. You requested above buildpulse-flaky-tests-plugin so the urls in the pom should use that, what most people do is to write https://github.com/jenkinsci/${project.artifactId}-plugin , affected lines: 10, 30, 33 - 35
• The version in line 90 is probably not needed as you get the version via the bom

[siddhantdange]

@mawinter69 updated CODEOWNERS, pom.xml, and renamed the repository to buildpulse-flaky-tests-plugin

[mawinter69]

The urls in line 33-35 are missing a / after the org

[siddhantdange]

@NotMyFault @mawinter69 updated

[github-actions]

Hello from your friendly Jenkins Hosting Checker

It looks like you have everything in order for your hosting request. A member of the Jenkins hosting team will check over things that I am not able to check(code review, README content, etc) and process the request as quickly as possible. Thank you for your patience.

Hosting team members can host this request with /hosting host

[siddhantdange]

@mawinter69 is this approved?

[NotMyFault]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan discovered 2 finding(s) 🔍.

Please follow the instructions below for every identified issues:

• Implement the recommended fix to address the issue.
• If you think it's a false positive, suppress the warning directly within the code.
• Alternative, you write an explanation here about why you think it's irrelevant. That will require a manual review, leading to a slower process.

After addressing the findings through one of the above methods:

• If all modifications have been made to the code, please initiate a new security scan by triggering the /request-security-scan command.
• If there are any unresolved findings (those not corrected or suppressed), request a review from the Jenkins security team by using the /audit-review command.

---

Jenkins: Plaintext password storage

You can find detailed information about this finding here.

BuildPulseStep.java#42

Field should be reviewed whether it stores a password and is serialized to disk: key

BuildPulseCommand.java#24

Field should be reviewed whether it stores a password and is serialized to disk: keyId

[siddhantdange]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan discovered 1 finding(s) 🔍.

Please follow the instructions below for every identified issues:

• Implement the recommended fix to address the issue.
• If you think it's a false positive, suppress the warning directly within the code.
• Alternative, you write an explanation here about why you think it's irrelevant. That will require a manual review, leading to a slower process.

After addressing the findings through one of the above methods:

• If all modifications have been made to the code, please initiate a new security scan by triggering the /request-security-scan command.
• If there are any unresolved findings (those not corrected or suppressed), request a review from the Jenkins security team by using the /audit-review command.

---

Jenkins: Plaintext password storage

You can find detailed information about this finding here.

BuildPulseCommand.java#24

Field should be reviewed whether it stores a password and is serialized to disk: keyId

[siddhantdange]

/request-security-scan

[jenkins-cert-app]

The Jenkins Security Scan did not find anything dangerous with your plugin, congratulations! 🎉

---

💡 The Security team recommends that you are setting up the scan in your repository by following our guide.

[siddhantdange]

@NotMyFault keyId is never serialized to disk

[siddhantdange]

@NotMyFault @mawinter69 Just wanted to bump this

[timja]

Hi apologies for the delay.

---

1. function name should not include step: https://github.com/buildpulse/buildpulse-flaky-tests-plugin/blob/main/src/main/java/io/jenkins/plugins/buildpulse/BuildPulseStep.java#L195
2. its not recommended to include developers in your pom.xml as from experience this is never maintained, information from the plugin site will come from this repository in respect to maintainers, https://github.com/buildpulse/buildpulse-flaky-tests-plugin/blob/main/pom.xml#L18-L24
3. your plugin doesn't look to be properly setup in respect to version, you should have revision and changelist properties defined, see https://github.com/jenkinsci/archetypes/blob/master/empty-plugin/src/main/resources/archetype-resources/pom.xml#L35-L36

[mawinter69]

• Please do not use System.out.println here https://github.com/buildpulse/buildpulse-flaky-tests-plugin/blob/6046891a9fbcc70e164a7a01cf009cb9b50a401c/src/main/java/io/jenkins/plugins/buildpulse/BuildPulseStep.java#L190