Idea: Add dkms support?

[Jibun-no-Kage]

Just for your consideration (this example assumes x86/x86_64):

# cd /root
# git clone https://github.com/ivanovborislav/rtl8188eu.git
# cd rtl8188eu

# nano dkms.conf
PACKAGE_NAME="rtl8188eu"
PACKAGE_VERSION="5.13.3"
MAKE[0]="'make' -j$(nproc) KVER=${kernelver} KSRC=/lib/modules/${kernelver}/build"
CLEAN="'make' clean"
BUILT_MODULE_NAME[0]="8188eu"
DEST_MODULE_LOCATION[0]="/kernel/drivers/net/wireless"
AUTOINSTALL="yes"

# mkdir -p /usr/src/rtl8188eu-5.13.3/
# cp -ar /root/rtl8188eu/* /usr/src/rtl8188eu-5.13.3/
# dkms add -m rtl8188eu -v 5.13.3
# dkms build -m rtl8188eu -v 5.13.3
# dkms install -m rtl8188eu -v 5.13.3
# dkms status

# dkms status
rtl8188eu, 5.13.3, 5.10.0-19-686-pae, i686: installed

# dkms status
rtl8188eu, 5.13.3, 5.10.0-19-amd64, x86_64: installed

Of course for Pi would need to change Makefile. But the same basic steps should work. By the way, I have seen a couple of Makefiles that figure out the architecture, so you don't have to do the Pi specific tweaks of the Makefile.

Would not be to hard to create a install-driver and remove-driver scripts. If your are open to a PR?

[ivanovborislav]

OK, i will add dkms support.

[Jibun-no-Kage]

That is really cool. Thanks for doing it.

[ivanovborislav]

Thank you for your wonderful idea!

[Jibun-no-Kage]

Sure, I just noticed that a few other drivers I use for WiFi USB adapters/dongles on Github, implemented DKMS, and wondered why you project did not, so figured I ask. :)