Home Assistant OS 14.1.rc1

[sairon]

Home Assistant Operating System

• Bump Buildroot to 2024.02.9 (Bump Buildroot to 2024.02.9 #3745) @sairon
• Enable TCPMSS target iptables module for all boards (Enable TCPMSS target iptables module for all boards #3739) @sairon

Raspberry Pi

• RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 (RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 #3715) @sairon
• Compile hailo_pci module from original sources on RPi 5 (Compile hailo_pci module from original sources on RPi 5 #3732) @sairon
• Fix Hailo-8 firmware path expected since driver v4.19.0 (Fix Hailo-8 firmware path expected since driver v4.19.0 #3721) @sairon
• Bump RPi SDIO WiFi firmware to latest version (Bump RPi SDIO WiFi firmware to latest version #3719) @sairon
• Bump Hailo-8 firmware to 4.19.0 for RPi kernel 6.6.62 (Bump Hailo-8 firmware to 4.19.0 for RPi kernel 6.6.62 #3716) @sairon

Home Assistant Yellow

• RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 (RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 #3715) @sairon
• Remove existing rauc.db from a data disk on the first boot (Remove existing rauc.db from a data disk on the first boot #3737) @sairon
• Add Hailo PCIe driver and firmware for Yellow (Add Hailo PCIe driver and firmware for Yellow #3734) @sairon
• Bump RPi SDIO WiFi firmware to latest version (Bump RPi SDIO WiFi firmware to latest version #3719) @sairon

Home Assistant Green

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Generic x86-64

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

ASUS Tinker

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Generic aarch64

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Build System

• Add HA Yellow image to RPi Imager index update action (Add HA Yellow image to RPi Imager index update action #3731) @sairon
• Bump docker/setup-buildx-action from 3.7.1 to 3.8.0 (Bump docker/setup-buildx-action from 3.7.1 to 3.8.0 #3746) @dependabot

---

This discussion was created from the release Home Assistant OS 14.1.rc1.

[Anto79-ops]

There are no issues on my NUC 12 (x86-64, bare-metal) with USB SkyConnect and USB Aeotec Z-Stick 7.

The system is running normally.

[Ladenburg1]

same issue here on a rpi5 with nvme as with the 14.0. System doesn't reboot and comes after a hard power off/on with the 13.2