diff --git a/pulsar/README.md b/pulsar/README.md
index 0a4a777..f509d1c 100644
--- a/pulsar/README.md
+++ b/pulsar/README.md
@@ -1,58 +1,108 @@
 # Apache Pulsar Connector
 
-A Hazelcast Jet connector for Apache Pulsar which enables Hazelcast Jet 
+A Hazelcast Jet connector for Apache Pulsar which enables Hazelcast Jet
 pipelines to read/write from/to Pulsar topics.
 
 It uses the Pulsar client library to read and publish messages from/to a
 Pulsar topic. Pulsar client library provides two different ways of
 reading messages from a topic. They are namely Consumer API and Reader
 API that have major differences. Pulsar connectors have benefits of both
-Consumer API and Reader API.
+Consumer API and Reader API. Both the sources and sink creation APIs of
+the Pulsar connector implement the builder pattern. We get the required
+parameters in the constructor and other parameters in the setters.
+Configuration values are set to default values and these default values
+can be changed using setters. We setted readerName, consumerName,
+subscriptionName, batchReceivePolicy to their default values, but they
+can be changed by using the configuration setters. Since the batch
+receive policy of the consumer is more likely to change, a separate
+builder setter is created for it.
+
+ The Pulsar Consumer Source is a distributed source that is created
+using the Consumer abstraction of the Pulsar. The Consumer API has a
+subscription mechanism which is used to consume messages from the first
+unacknowledged message of this subscription. The consumer source uses
+shared (or round-robin) subscription mode. We create one consumer client
+per source processor of Hazelcast Jet, and these allow consuming
+messages in a distributed manner. This source consumes messages in a
+blocking batch manner, and the batch receive policy can be configurable
+in the builder methods. The distributed manner prevents the order of
+messages from being preserved. Since the Pulsar Consumer API does not
+return the cursor for the last consumed message, it is incapable of
+assuring fault-tolerance.
+
+ The Pulsar Reader Source is a fault-tolerant source that provides the
+exactly-once processing guarantee. In Pulsar Reader Source, the
+MessageId of the latest read message is stored in the snapshot. In case
+of failure, the job restarts from the latest snapshot and reads from the
+stored MessageId. Since it requires a partition-mapping logic, this
+source is not a distributed source.
+
+The Consumer Source is faster than the Reader Source because the
+Consumer source is a distributed source. But, the Reader Source is
+better than the Consumer in terms of processing guarantee it provides.
 
 Besides, this Pulsar client library has an API called the Producer API.
 The Pulsar connector enables users to use the Pulsar topic as a sink in
 Jet pipelines.
+
+Note that: The Pulsar sources and sink do not fail fast in the scenario
+that when the job reading Pulsar topic using the Pulsar consumer source
+is running and Pulsar broker is closed, the job doesn't fail, it just
+prints log at warn level. The reason for this is that the Pulsar Client
+tries to reconnect to the broker with exponential backoff in this case,
+and while doing this, we cannot notice the connection issue because it
+only prints logs without throwing an exception.
+
+For more detailed information about the design of this connector
+[look](https://jet-start.sh/docs/design-docs/009-pulsar-connector)
+
 ## Connector Attributes
 
 ### Source Attributes
+
 |  Atrribute  | Value |
 |:-----------:|-------|
 | Has Source  |  Yes  |
 | Batch       |   No  |
 | Stream      |  Yes  |
-| Distributed |   Yes  |
+| Distributed |  Yes  |
 
 ### Sink Attributes
+
 |  Atrribute  | Value |
 |:-----------:|-------|
 | Has Sink    |  Yes  |
 | Distributed |  Yes  |
 
-
 ## Getting Started
 
 ### Installing
 
-The Hazelcast Apache Pulsar Connector artifacts are published on the Maven repositories.
+The Hazelcast Apache Pulsar Connector artifacts are published on the
+Maven repositories.
 
-Add the following lines to your pom.xml to include it as a dependency to your project:
+Add the following lines to your pom.xml to include it as a dependency to
+your project:
 
-```
+```xml
 <dependency>
     <groupId>com.hazelcast.jet.contrib</groupId>
     <artifactId>pulsar</artifactId>
     <version>${version}</version>
 </dependency>
 ```
-If you are using Gradle: 
-```
+
+If you are using Gradle:
+
+```gradle
 compile group: 'com.hazelcast.jet.contrib', name: 'pulsar', version: ${version}
 ```
+
 ## Running the tests
 
-To run the tests run the command below: 
+To run the tests run the command below:
 
-```
+```sh
 ./gradlew test
 ```
 
@@ -61,11 +111,14 @@ To run the tests run the command below:
 #### Reading from a Pulsar topic
 
 ##### Using Pulsar Reader Source
-We have tutorial for the Pulsar reader source [here](https://jet-start.sh/docs/tutorials/pulsar).
+
+We have tutorial for the Pulsar reader source
+[here](https://jet-start.sh/docs/tutorials/pulsar).
 
 ##### Using Pulsar Consumer Source
 
 In practice, using Pulsar consumer stream source like this:
+
 ```java
 import com.hazelcast.jet.contrib.pulsar.*;
 [...]
@@ -78,14 +131,14 @@ StreamSource<String> pulsarReaderSource = PulsarSources.pulsarConsumerBuilder(
                            to String before emitting. */
             ).build();
 pipeline.readFrom(pulsarSource)
-        .writeTo(Sinks.logger()); 
+        .writeTo(Sinks.logger());
 ```
 
 ### Publish Messages to a Pulsar topic
 
-The pipeline below connects the local Pulsar cluster located at 
-`localhost:6650`(default address) and then publishes messages
-to the pulsar topic, `hazelcast-demo-topic`,
+The pipeline below connects the local Pulsar cluster located at
+`localhost:6650`(default address) and then publishes messages to the
+pulsar topic, `hazelcast-demo-topic`,
 
 ```java
 import com.hazelcast.jet.contrib.pulsar.*;
@@ -107,10 +160,11 @@ p.readFrom(TestSources.itemStream(15))
 
 * **Ufuk Yılmaz**
 
-See also the list of [contributors](https://github.com/hazelcast/hazelcast-jet-contrib/graphs/contributors) 
+See also the list of
+[contributors](https://github.com/hazelcast/hazelcast-jet-contrib/graphs/contributors)
 who participated in this project.
 
 ## License
 
-This project is licensed under the Apache 2.0 license - see the [LICENSE](../LICENSE) 
-file for details
+This project is licensed under the Apache 2.0 license - see the
+[LICENSE](../LICENSE) file for details