wscript

#
# RTEMS Project (https://www.rtems.org/)
#
# Copyright (c) 2015-2016 Chris Johns <chrisj@rtems.org>. All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

#
# RTEMS LibBSD is a transparent source build of the FreeBSD kernel source for RTEMS.
#
# To use see README.waf shipped with this file.
#

from __future__ import print_function

rtems_version = "5"

try:
    import rtems_waf.rtems as rtems
except:
    print("error: no rtems_waf git submodule; see README.waf")
    import sys
    sys.exit(1)

import libbsd
import waf_libbsd
import os.path
import runpy
import sys
try:
    import configparser
except ImportError:
    import ConfigParser as configparser
import waflib.Options

builders = {}

BUILDSET_DIR = "buildset"
BUILDSET_DEFAULT = "buildset/default.ini"

def load_ini(conf, f):
    ini = configparser.ConfigParser()
    ini.read(f)
    if not ini.has_section('general'):
        conf.fatal("'{}' is missing a general section.".format(f))
    if not ini.has_option('general', 'name'):
        conf.fatal("'{}' is missing a general/name.".format(f))
    if ini.has_option('general', 'extends'):
        extends = ini.get('general', 'extends')
        extendfile = None
        basepath = os.path.dirname(f)
        if os.path.isfile(os.path.join(basepath, extends)):
            extendfile = os.path.join(basepath, extends)
        elif os.path.isfile(os.path.join(BUILDSET_DIR, extends)):
            extendfile = os.path.join(BUILDSET_DIR, extends)
        else:
            conf.fatal("'{}': Invalid file given for general/extends:'{}'"
                .format(f, extends))
        base = load_ini(conf, extendfile)
        for s in ini.sections():
            if not base.has_section(s):
                base.add_section(s)
            for o in ini.options(s):
                val = ini.get(s, o)
                base.set(s, o, val)
        ini = base
    return ini

def load_config(conf, f):
    ini = load_ini(conf, f)
    config = {}

    config['name'] = ini.get('general', 'name')

    config['modules-enabled'] = []
    mods = []
    if ini.has_section('modules'):
        mods = ini.options('modules')
    for mod in mods:
        if ini.getboolean('modules', mod):
            config['modules-enabled'].append(mod)
    return config

def update_builders(ctx, buildset_opt):
    global builders
    builders = {}

    buildsets = []
    if buildset_opt == []:
        buildset_opt.append(BUILDSET_DEFAULT)
    for bs in buildset_opt:
        if os.path.isdir(bs):
            for f in os.listdir(bs):
                if f[-4:] == ".ini":
                    buildsets += [os.path.join(bs,f)]
        else:
            for f in bs.split(','):
                buildsets += [f]

    for bs in buildsets:
        builder = waf_libbsd.Builder()
        libbsd.load(builder)
        bsconfig = load_config(ctx, bs)
        bsname = bsconfig['name']
        builder.updateConfiguration(bsconfig)
        builder.generate(rtems_version)
        builders[bsname]=builder

def bsp_init(ctx, env, contexts):
    # This function generates the builders and adds build-xxx, clean-xxx and
    # install-xxx targets for them.

    if not 'buildset' in env.options:
        # This happens if 'waf configure' hasn't been executed. In that case we
        # create the builders during the configure phase. After the first time
        # 'waf configure' is executed 'buildset' is read from the .lock_xxx
        # file. In that case the builders are overwritten during configure
        # phase. This is not really the cleanest solution but it works.
        return

    update_builders(ctx, env.options['buildset'])
    for builder in builders:
        # Update the contextes for build variants
        for y in contexts:
            newcmd = y.cmd + '-' + builder
            newvariant = y.variant + '-' + builder
            class context(y):
                cmd = newcmd
                variant = newvariant
                libbsd_buildset_name = builder

    # Transform the commands to per build variant commands
    commands = []
    for cmd in waflib.Options.commands:
        if cmd.startswith(('build', 'clean', 'install')):
            for builder in builders:
                commands += [cmd + '-' + builder]
        else:
            commands += [cmd]
    waflib.Options.commands = commands

def init(ctx):
    rtems.init(ctx, version = rtems_version, long_commands = True,
               bsp_init = bsp_init)

def options(opt):
    rtems.options(opt)
    opt.add_option("--enable-auto-regen",
                   action = "store_true",
                   default = False,
                   dest = "auto_regen",
                   help = "Enable auto-regeneration of LEX, RPC and YACC files.")
    opt.add_option("--enable-warnings",
                   action = "store_true",
                   default = False,
                   dest = "warnings",
                   help = "Enable all warnings. The default is quiet builds.")
    opt.add_option("--net-test-config",
                   default = "config.inc",
                   dest = "net_config",
                   help = "Network test configuration.")
    opt.add_option("--freebsd-options",
                   action = "store",
                   default = "",
                   dest = "freebsd_options",
                   help = "Set FreeBSD options (developer option).")
    opt.add_option("--optimization",
                   action = "store",
                   default = "2",
                   dest = "optimization",
                   help = "Set optimization level to OPTIMIZATION (-On compiler flag). Default is 2 (-O2).")
    opt.add_option("--buildset",
                   action = "append",
                   default = [],
                   dest = "buildset",
                   help = "Select build sets to build. If set to a directory, all .ini file in this directory will be used.")

def bsp_configure(conf, arch_bsp):
    conf.check(header_name = "dlfcn.h", features = "c")
    conf.check(header_name = "rtems/pci.h", features = "c", mandatory = False)
    if not rtems.check_posix(conf):
        conf.fatal("RTEMS kernel POSIX support is disabled; configure RTEMS with --enable-posix")
    if rtems.check_networking(conf):
        conf.fatal("RTEMS kernel contains the old network support; configure RTEMS with --disable-networking")
    env = conf.env.derive()
    for builder in builders:
        ab = conf.env.RTEMS_ARCH_BSP
        variant = ab + "-" + builder
        conf.msg('Configure variant: ', variant)
        conf.setenv(variant, env)
        builders[builder].bsp_configure(conf, arch_bsp)
        conf.setenv(ab)

def configure(conf):
    if conf.options.auto_regen:
        conf.find_program("lex", mandatory = True)
        conf.find_program("rpcgen", mandatory = True)
        conf.find_program("yacc", mandatory = True)
    conf.env.AUTO_REGEN = conf.options.auto_regen
    conf.env.WARNINGS = conf.options.warnings
    conf.env.NET_CONFIG = conf.options.net_config
    conf.env.FREEBSD_OPTIONS =conf.options.freebsd_options
    conf.env.OPTIMIZATION = conf.options.optimization
    conf.env.BUILDSET = conf.options.buildset
    if len(conf.env.BUILDSET) == 0:
        conf.env.BUILDSET += [BUILDSET_DEFAULT]
    update_builders(conf, conf.env.BUILDSET)
    rtems.configure(conf, bsp_configure)

def build(bld):
    rtems.build(bld)
    builders[bld.libbsd_buildset_name].build(bld)