Controllers

Controllers are part of the MVC architecture. They are objects of classes extending from [[yii\base\Controller]] and are responsible for processing requests and generating responses. In particular, after taking over the control from applications, controllers will analyze incoming request data, pass them to models, inject model results into views, and finally generate outgoing responses.

Actions

Controllers are composed of actions which are the most basic units that end users can address and request for execution. A controller can have one or multiple actions.

The following example shows a post controller with two actions: view and create:

namespace app\controllers;

use Yii;
use app\models\Post;
use yii\web\Controller;
use yii\web\NotFoundHttpException;

class PostController extends Controller
{
    public function actionView($id)
    {
        $model = Post::findOne($id);
        if ($model === null) {
            throw new NotFoundHttpException;
        }

        return $this->render('view', [
            'model' => $model,
        ]);
    }

    public function actionCreate()
    {
        $model = new Post;

        if ($model->load(Yii::$app->request->post()) && $model->save()) {
            return $this->redirect(['view', 'id' => $model->id]);
        } else {
            return $this->render('create', [
                'model' => $model,
            ]);
        }
    }
}

In the view action (defined by the actionView() method), the code first loads the model according to the requested model ID; If the model is loaded successfully, it will display it using a view named view. Otherwise, it will throw an exception.

In the create action (defined by the actionCreate() method), the code is similar. It first tries to populate the model using the request data and save the model. If both succeed it will redirect the browser to the view action with the ID of the newly created model. Otherwise it will display the create view through which users can provide the needed input.

Routes

End users address actions through the so-called routes. A route is a string that consists of the following parts:

a module ID: this exists only if the controller belongs to a non-application module;
a controller ID: a string that uniquely identifies the controller among all controllers within the same application (or the same module if the controller belongs to a module);
an action ID: a string that uniquely identifies the action among all actions within the same controller.

Routes take the following format:

ControllerID/ActionID

or the following format if the controller belongs to a module:

ModuleID/ControllerID/ActionID

So if a user requests with the URL http://hostname/index.php?r=site/index, the index action in the site controller will be executed. For more details on how routes are resolved into actions, please refer to the Routing and URL Generation section.

Creating Controllers

In [[yii\web\Application|Web applications]], controllers should extend from [[yii\web\Controller]] or its child classes. Similarly in [[yii\console\Application|console applications]], controllers should extend from [[yii\console\Controller]] or its child classes. The following code defines a site controller:

namespace app\controllers;

use yii\web\Controller;

class SiteController extends Controller
{
}

Controller IDs

Usually, a controller is designed to handle the requests regarding a particular type of resource. For this reason, controller IDs are often nouns referring to the types of the resources that they are handling. For example, you may use article as the ID of a controller that handles article data.

By default, controller IDs should contain these characters only: English letters in lower case, digits, underscores, hyphens, and forward slashes. For example, article and post-comment are both valid controller IDs, while article?, PostComment, admin\post are not.

A controller ID may also contain a subdirectory prefix. For example, admin/article stands for an article controller in the admin subdirectory under the [[yii\base\Application::controllerNamespace|controller namespace]]. Valid characters for subdirectory prefixes include: English letters in lower and upper cases, digits, underscores, and forward slashes, where forward slashes are used as separators for multi-level subdirectories (e.g. panels/admin).

Controller Class Naming

Controller class names can be derived from controller IDs according to the following procedure:

Turn the first letter in each word separated by hyphens into upper case. Note that if the controller ID contains slashes, this rule only applies to the part after the last slash in the ID.
Remove hyphens and replace any forward slashes with backward slashes.
Append the suffix Controller.
Prepend the [[yii\base\Application::controllerNamespace|controller namespace]].

The following are some examples, assuming the [[yii\base\Application::controllerNamespace|controller namespace]] takes the default value app\controllers:

article becomes app\controllers\ArticleController;
post-comment becomes app\controllers\PostCommentController;
admin/post-comment becomes app\controllers\admin\PostCommentController;
adminPanels/post-comment becomes app\controllers\adminPanels\PostCommentController.

Controller classes must be autoloadable. For this reason, in the above examples, the article controller class should be saved in the file whose alias is @app/controllers/ArticleController.php; while the admin/post-comment controller should be in @app/controllers/admin/PostCommentController.php.

Info: The last example admin/post-comment shows how you can put a controller under a sub-directory of the [[yii\base\Application::controllerNamespace|controller namespace]]. This is useful when you want to organize your controllers into several categories and you do not want to use modules.

Controller Map

You can configure the [[yii\base\Application::controllerMap|controller map]] to overcome the constraints of the controller IDs and class names described above. This is mainly useful when you are using third-party controllers and you do not have control over their class names.

You may configure the [[yii\base\Application::controllerMap|controller map]] in the application configuration. For example:

[
    'controllerMap' => [
        // declares "account" controller using a class name
        'account' => 'app\controllers\UserController',

        // declares "article" controller using a configuration array
        'article' => [
            'class' => 'app\controllers\PostController',
            'enableCsrfValidation' => false,
        ],
    ],
]

Default Controller

Each application has a default controller specified via the [[yii\base\Application::defaultRoute]] property. When a request does not specify a route, the route specified by this property will be used. For [[yii\web\Application|Web applications]], its value is 'site', while for [[yii\console\Application|console applications]], it is help. Therefore, if a URL is http://hostname/index.php, then the site controller will handle the request.

You may change the default controller with the following application configuration:

[
    'defaultRoute' => 'main',
]

Creating Actions

Creating actions can be as simple as defining the so-called action methods in a controller class. An action method is a public method whose name starts with the word action. The return value of an action method represents the response data to be sent to end users. The following code defines two actions, index and hello-world:

namespace app\controllers;

use yii\web\Controller;

class SiteController extends Controller
{
    public function actionIndex()
    {
        return $this->render('index');
    }

    public function actionHelloWorld()
    {
        return 'Hello World';
    }
}

Action IDs

An action is often designed to perform a particular manipulation of a resource. For this reason, action IDs are usually verbs, such as view, update, etc.

By default, action IDs should contain these characters only: English letters in lower case, digits, underscores, and hyphens. (You can use hyphens to separate words.) For example, view, update2, and comment-post are all valid action IDs, while view? and Update are not.

You can create actions in two ways: inline actions and standalone actions. An inline action is defined as a method in the controller class, while a standalone action is a class extending [[yii\base\Action]] or its child classes. Inline actions take less effort to create and are often preferred if you have no intention to reuse these actions. Standalone actions, on the other hand, are mainly created to be used in different controllers or be redistributed as extensions.

Inline Actions

Inline actions refer to the actions that are defined in terms of action methods as we just described.

The names of the action methods are derived from action IDs according to the following procedure:

Turn the first letter in each word of the action ID into upper case.
Remove hyphens.
Prepend the prefix action.

For example, index becomes actionIndex, and hello-world becomes actionHelloWorld.

Note: The names of the action methods are case-sensitive. If you have a method named ActionIndex, it will not be considered as an action method, and as a result, the request for the index action will result in an exception. Also note that action methods must be public. A private or protected method does NOT define an inline action.

Inline actions are the most commonly defined actions because they take little effort to create. However, if you plan to reuse the same action in different places, or if you want to redistribute an action, you should consider defining it as a standalone action.

Standalone Actions

Standalone actions are defined in terms of action classes extending [[yii\base\Action]] or its child classes. For example, in the Yii releases, there are [[yii\web\ViewAction]] and [[yii\web\ErrorAction]], both of which are standalone actions.

To use a standalone action, you should declare it in the action map by overriding the [[yii\base\Controller::actions()]] method in your controller classes like the following:

public function actions()
{
    return [
        // declares "error" action using a class name
        'error' => 'yii\web\ErrorAction',

        // declares "view" action using a configuration array
        'view' => [
            'class' => 'yii\web\ViewAction',
            'viewPrefix' => '',
        ],
    ];
}

As you can see, the actions() method should return an array whose keys are action IDs and values the corresponding action class names or configurations. Unlike inline actions, action IDs for standalone actions can contain arbitrary characters, as long as they are declared in the actions() method.

To create a standalone action class, you should extend [[yii\base\Action]] or a child class, and implement a public method named run(). The role of the run() method is similar to that of an action method. For example,

<?php
namespace app\components;

use yii\base\Action;

class HelloWorldAction extends Action
{
    public function run()
    {
        return "Hello World";
    }
}

Action Results

The return value of an action method or of the run() method of a standalone action is significant. It stands for the result of the corresponding action.

The return value can be a response object which will be sent to the end user as the response.

For [[yii\web\Application|Web applications]], the return value can also be some arbitrary data which will be assigned to [[yii\web\Response::data]] and be further converted into a string representing the response body.
For [[yii\console\Application|console applications]], the return value can also be an integer representing the [[yii\console\Response::exitStatus|exit status]] of the command execution.

In the examples shown above, the action results are all strings which will be treated as the response body to be sent to end users. The following example shows how an action can redirect the user browser to a new URL by returning a response object (because the [[yii\web\Controller::redirect()|redirect()]] method returns a response object):

public function actionForward()
{
    // redirect the user browser to http://example.com
    return $this->redirect('http://example.com');
}

Action Parameters

The action methods for inline actions and the run() methods for standalone actions can take parameters, called action parameters. Their values are obtained from requests. For [[yii\web\Application|Web applications]], the value of each action parameter is retrieved from $_GET using the parameter name as the key; for [[yii\console\Application|console applications]], they correspond to the command line arguments.

In the following example, the view action (an inline action) has declared two parameters: $id and $version.

namespace app\controllers;

use yii\web\Controller;

class PostController extends Controller
{
    public function actionView($id, $version = null)
    {
        // ...
    }
}

The action parameters will be populated as follows for different requests:

http://hostname/index.php?r=post/view&id=123: the $id parameter will be filled with the value '123', while $version is still null because there is no version query parameter.
http://hostname/index.php?r=post/view&id=123&version=2: the $id and $version parameters will be filled with '123' and '2', respectively.
http://hostname/index.php?r=post/view: a [[yii\web\BadRequestHttpException]] exception will be thrown because the required $id parameter is not provided in the request.
http://hostname/index.php?r=post/view&id[]=123: a [[yii\web\BadRequestHttpException]] exception will be thrown because $id parameter is receiving an unexpected array value ['123'].

If you want an action parameter to accept array values, you should type-hint it with array, like the following:

public function actionView(array $id, $version = null)
{
    // ...
}

Now if the request is http://hostname/index.php?r=post/view&id[]=123, the $id parameter will take the value of ['123']. If the request is http://hostname/index.php?r=post/view&id=123, the $id parameter will still receive the same array value because the scalar value '123' will be automatically turned into an array.

The above examples mainly show how action parameters work for Web applications. For console applications, please refer to the Console Commands section for more details.

Default Action

Each controller has a default action specified via the [[yii\base\Controller::defaultAction]] property. When a route contains the controller ID only, it implies that the default action of the specified controller is requested.

By default, the default action is set as index. If you want to change the default value, simply override this property in the controller class, like the following:

namespace app\controllers;

use yii\web\Controller;

class SiteController extends Controller
{
    public $defaultAction = 'home';

    public function actionHome()
    {
        return $this->render('home');
    }
}

Controller Lifecycle

When processing a request, an application will create a controller based on the requested route. The controller will then undergo the following lifecycle to fulfill the request:

The [[yii\base\Controller::init()]] method is called after the controller is created and configured.
The controller creates an action object based on the requested action ID:
- If the action ID is not specified, the [[yii\base\Controller::defaultAction|default action ID]] will be used.
- If the action ID is found in the [[yii\base\Controller::actions()|action map]], a standalone action will be created;
- If the action ID is found to match an action method, an inline action will be created;
- Otherwise an [[yii\base\InvalidRouteException]] exception will be thrown.
The controller sequentially calls the beforeAction() method of the application, the module (if the controller belongs to a module), and the controller.
- If one of the calls returns false, the rest of the uncalled beforeAction() methods will be skipped and the action execution will be cancelled.
- By default, each beforeAction() method call will trigger a beforeAction event to which you can attach a handler.
The controller runs the action.
- The action parameters will be analyzed and populated from the request data.
The controller sequentially calls the afterAction() method of the controller, the module (if the controller belongs to a module), and the application.
- By default, each afterAction() method call will trigger an afterAction event to which you can attach a handler.
The application will take the action result and assign it to the response.

Best Practices

In a well-designed application, controllers are often very thin, with each action containing only a few lines of code. If your controller is rather complicated, it usually indicates that you should refactor it and move some code to other classes.

Here are some specific best practices. Controllers

may access the request data;
may call methods of models and other service components with request data;
may use views to compose responses;
should NOT process the request data - this should be done in the model layer;
should avoid embedding HTML or other presentational code - this is better done in views.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

structure-controllers.md

structure-controllers.md

Controllers

Actions

Routes

Creating Controllers

Controller IDs

Controller Class Naming

Controller Map

Default Controller

Creating Actions

Action IDs

Inline Actions

Standalone Actions

Action Results

Action Parameters

Default Action

Controller Lifecycle

Best Practices

Files

structure-controllers.md

Latest commit

History

structure-controllers.md

File metadata and controls

Controllers

Actions

Routes

Creating Controllers

Controller IDs

Controller Class Naming

Controller Map

Default Controller

Creating Actions

Action IDs

Inline Actions

Standalone Actions

Action Results

Action Parameters

Default Action

Controller Lifecycle

Best Practices