Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Can't install TUF-AX3000 V2 firmwares #664

Open
sojusnik opened this issue Aug 26, 2024 · 3 comments
Open

Can't install TUF-AX3000 V2 firmwares #664

sojusnik opened this issue Aug 26, 2024 · 3 comments
Labels
bug Something isn't working

Comments

@sojusnik
Copy link

sojusnik commented Aug 26, 2024 •
edited
Loading

Router Model Affected
TUF-AX3000 V2

Firmware Version Affected
all versions

Is this bug present in upstream Merlin releases too?
can't check, because Merlin doesn't support TUF-AX3000 V2

Describe the bug
I want to upgrade from stock to this firmware, but when going in the web UI to "firmware upgrade", then uploading the most recent firmware, I see the updating process going from 1% to 99%, then the window reloads without any notifications about a successful upgrade or the like, asking my username and password to log in, where I see the old interface with the old stock firmware version number (which is the most recent one):

grafik

I've tried using Firefox and Brave Browser, factory resetting the router (through the web UI and by rebooting and holding the WPS button) before and after upgrading and tried installing all 3 stable releases (all are "non-tuf" with ASUS' default interface)

https://github.com/gnuton/asuswrt-merlin.ng/releases/download/3004.388.8_2-gnuton1/TUF-AX3000_V2_3004_388.8_2-gnuton1_nand_squashfs.pkgtb
https://github.com/gnuton/asuswrt-merlin.ng/releases/download/3004.388.7_1-gnuton1/TUF-AX3000_V2_3004_388.7_1-gnuton1_nand_squashfs.pkgtb
https://github.com/gnuton/asuswrt-merlin.ng/releases/download/3004.388.6_2-gnuton1/TUF-AX3000_V2_3004_388.6_2-gnuton1_nand_squashfs.pkgtb

but without any success.

To Reproduce
Steps to reproduce the behavior:

  1. Go to "firmware upgrade" in the web UI
  2. Click on "upload" to select the firmware
  3. Wait until the upgrade process has finished
  4. Observe that the old stock firmware is still installed

Expected behavior
The new firmware should be installed.
@sojusnik sojusnik added the bug Something isn't working label Aug 26, 2024
@sojusnik sojusnik mentioned this issue Aug 26, 2024
Open
@gnuton
Copy link
Owner

gnuton commented Aug 27, 2024

Hi @sojusnik can you show us the logs?
It's important to tell which version of the firmware you have tested

@sojusnik
Copy link
Author

I want to upgrade from stock 3.0.0.4.388_23785-g6bb7c92 to TUF-AX3000_V2_3004_388.8_2-gnuton1_nand_squashfs.pkgtb (hash verified).

So I've cleared all logs, restarted the router and did a firmware upgrade (should be around 08:47). This is the whole log I get:

May  5 07:05:04 kernel: klogd started: BusyBox v1.24.1 (2023-07-29 16:15:51 CST)
May  5 07:05:04 kernel: Linux version 4.19.183 (gitserv_asus@bpza001bud) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Sat Jul 29 16:17:43 CST 2023
May  5 07:05:04 kernel: random: get_random_bytes called from start_kernel+0x9c/0x490 with crng_init=0
May  5 07:05:04 kernel: Kernel command line: console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe isolcpus=3 rootwait mtdparts=spi1.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_6 ubi.mtd=image ubi.block=0,6 rootfstype=squashfs cma=0M
May  5 07:05:04 kernel: Virtual kernel memory layout:
May  5 07:05:04 kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
May  5 07:05:04 kernel:     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
May  5 07:05:04 kernel:     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
May  5 07:05:04 kernel:     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
May  5 07:05:04 kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
May  5 07:05:04 kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
May  5 07:05:04 kernel:       .text : 0x(ptrval) - 0x(ptrval)   (8160 kB)
May  5 07:05:04 kernel:       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
May  5 07:05:04 kernel:       .data : 0x(ptrval) - 0x(ptrval)   ( 255 kB)
May  5 07:05:04 kernel:        .bss : 0x(ptrval) - 0x(ptrval)   ( 311 kB)
May  5 07:05:04 kernel: CCI hardware cache coherency enabled
May  5 07:05:04 kernel: bootloader version  U-Boot 2019.07 (Jul 29 2023 - 17:59:49 +0800), Build: 5.04L.0
May  5 07:05:04 kernel: inMemNvramData.szBoardId TUF_AX3000_V2
May  5 07:05:04 kernel: size of sk_buff 368
May  5 07:05:04 kernel: offset of cb in sk_buff 256
May  5 07:05:04 kernel: PMC driver initcall
May  5 07:05:04 kernel: PMC driver scanning DT
May  5 07:05:04 kernel: pmc match PMC brcm,bca-pmc-3-2
May  5 07:05:04 kernel:      Remapping PMC IO memories...
May  5 07:05:04 kernel:              phys              virt          size
May  5 07:05:04 kernel:      0x0000000080301018 0x00000000e0878018 0x00005080
May  5 07:05:04 kernel:      0x0000000080320000 0x00000000e0911000 0x00000240
May  5 07:05:04 kernel:      0x0000000080300400 0x00000000e0913400 0x000005d0
May  5 07:05:04 kernel:      0x0000000080380000 0x00000000e0915000 0x00001000
May  5 07:05:04 kernel: pmc_init:PMC using DQM mode
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 22
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 23
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 24
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 25
May  5 07:05:04 kernel: Allocated EXT_TIMER number 3
May  5 07:05:04 kernel: Broadcom Timer Initialized
May  5 07:05:04 kernel: Broadcom GBPM v0.1 initialized
May  5 07:05:04 kernel: Broadcom IQoS v1.0 initialized
May  5 07:05:04 kernel: Broadcom Logger v0.1
May  5 07:05:04 kernel: /dev/bcmnet Char device registered
May  5 07:05:04 kernel: skb_free_task created successfully with start budget 256
May  5 07:05:04 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 07:05:04 kernel: BLOG Rule v1.0 Initialized
May  5 07:05:04 kernel: Skip Legacy Led init
May  5 07:05:04 kernel: Initialise system trusted keyrings
May  5 07:05:04 kernel: Key type asymmetric registered
May  5 07:05:04 kernel: Asymmetric key parser 'x509' registered
May  5 07:05:04 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May  5 07:05:04 kernel: SPINAND ID 
May  5 07:05:04 kernel: 0x2c 
May  5 07:05:04 kernel: 0x24 
May  5 07:05:04 kernel: 0x2c 
May  5 07:05:04 kernel: 0x24 
May  5 07:05:04 kernel: MICRON
May  5 07:05:04 kernel:  MT29F2G01AB
May  5 07:05:04 kernel: 3 cmdlinepart partitions found on MTD device spi1.0
May  5 07:05:04 kernel: Creating 3 MTD partitions on "spi1.0":
May  5 07:05:04 kernel: 0x000000000000-0x000000200000 : "loader"
May  5 07:05:04 kernel: 0x000000200000-0x00000fe00000 : "image"
May  5 07:05:04 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May  5 07:05:04 kernel: brcmboard registered
May  5 07:05:04 kernel: brcmboard: brcm_board_init entry
May  5 07:05:04 kernel: Last RESET due to POR reset
May  5 07:05:04 kernel: RESET reason: 0x00000000
May  5 07:05:04 kernel: DYING GASP IRQ Initialized and Enabled
May  5 07:05:04 kernel: bcm_i2c: Error in loading module
May  5 07:05:04 kernel: init procfs
May  5 07:05:04 kernel: Bridge Broadcom hooks registered
May  5 07:05:04 kernel: Registering SWP/SWPB emulation handler
May  5 07:05:04 kernel: Loading compiled-in X.509 certificates
May  5 07:05:04 kernel: ubi0: attaching mtd2
May  5 07:05:04 kernel: ubi0: scanning is finished
May  5 07:05:04 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May  5 07:05:04 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 07:05:04 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 07:05:04 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 07:05:04 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May  5 07:05:04 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May  5 07:05:04 kernel: ubi0: max/mean erase counter: 40/17, WL threshold: 4096, image sequence number: 1687183831
May  5 07:05:04 kernel: ubi0: available PEBs: 422, total reserved PEBs: 1594, PEBs reserved for bad PEB handling: 40
May  5 07:05:04 kernel: ubi0: background thread "ubi_bgt0d" started, PID 104
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x8
May  5 07:05:04 kernel: Registered phy device: GPY211:0x19
May  5 07:05:04 kernel: Registered phy device: 5GAE:0x6
May  5 07:05:04 kernel: Registered phy device: 5GAE:0x7
May  5 07:05:04 kernel: Registered phy device: MAC2MAC:0x1
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x1
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x2
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x3
May  5 07:05:04 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 202
May  5 07:05:04 kernel: UBIFS (ubi0:10): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:10): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May  5 07:05:04 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 1609246B-13E9-4D4C-BC91-FFFA4BA17D4B, small LPT model
May  5 07:05:04 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 218
May  5 07:05:04 kernel: UBIFS (ubi0:11): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:11): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May  5 07:05:04 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID 29044A01-979E-405A-A47B-E6A108712C6B, small LPT model
May  5 07:05:04 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 248
May  5 07:05:04 kernel: UBIFS (ubi0:13): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:13): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May  5 07:05:04 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID BE885C4A-5B19-4475-8652-4D51BDD7CAE0, small LPT model
May  5 07:05:04 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 07:05:04 kernel: Disabling lock debugging due to kernel taint
May  5 07:05:04 kernel: BCMLIBS loaded...
May  5 07:05:04 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:3447^[[0m
May  5 07:05:04 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 3447^[[0m
May  5 07:05:04 kernel: License chip name: 6756 serial number: 000000000000000000000000
May  5 07:05:04 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 07:05:04 kernel: Broadcom Ingress QoS Module  Char Driver v1.0 Registered<303>^[[0m
May  5 07:05:04 kernel: Broadcom Ingress QoS v1.0 initialized
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<63>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May  5 07:05:04 kernel: npe_max_entries<35072>
May  5 07:05:04 kernel: Bind blog_notify_evt_enqueue_fn[<bf0e08bc>]
May  5 07:05:04 kernel: fc_evt task created successfully
May  5 07:05:04 kernel: max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5 
May  5 07:05:04 kernel: NBUFF v1.0 Initialized
May  5 07:05:04 kernel: fcache: mcast_max_groups<128> mcast_max_clients_per_group<63> mcast_max_clients<1024>
May  5 07:05:04 kernel: fcache: mcast_max_ent<1152>
May  5 07:05:04 kernel: fcache: ucast_max_ent<16384>
May  5 07:05:04 kernel: fcache: max_ent<17536>
May  5 07:05:04 kernel: ^[[0;36;44mTotal # of labels = 77^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 07:05:04 kernel: 	Pkt HW acceleration is disabled/unavailable.
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<302>^[[0m
May  5 07:05:04 kernel: fc_timer_task created successfully
May  5 07:05:04 kernel: 	Pkt HW acceleration is disabled/unavailable.
May  5 07:05:04 kernel: Created Proc FS /procfs/fcache
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 07:05:04 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xdec779d2]=0^[[0m
May  5 07:05:04 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 07:05:04 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May  5 07:05:04 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 07:05:04 kernel: Broadcom Command List Driver v1.0
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May  5 07:05:04 kernel: Open archer Netdevice
May  5 07:05:04 kernel: Archer DS DPI Initialized
May  5 07:05:04 kernel: Archer US DPI Initialized
May  5 07:05:04 kernel: Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10)
May  5 07:05:04 kernel: Archer WLAN Rx Thread Initialized
May  5 07:05:04 kernel: Sysport 0 WOL IRQ 55
May  5 07:05:04 kernel: Sysport Driver User IRQ: 0x80498284
May  5 07:05:04 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
May  5 07:05:04 kernel: SYSPORT User IRQ: interrupt_id 54, controller 4 (phys 0x80498284)
May  5 07:05:04 kernel: archer_dhd_processing_construct: Mon Jul 25 15:49:33 CST 2022 []
May  5 07:05:04 kernel: archer_dhd_processing_construct: 5c3593d8f15dd00c6085f7b2a50a0285
May  5 07:05:04 kernel: Archer DHD Initialized
May  5 07:05:04 kernel: Archer Mode set to L2+L3
May  5 07:05:04 kernel: Archer Mode set to L2+L3
May  5 07:05:04 kernel: Initialized Archer Host Layer
May  5 07:05:04 kernel: Flow Table (160, 40): 05313388, 2621440 bytes
May  5 07:05:04 kernel: Flow Info Table (44, 65536): ee139e56, 2883584 bytes
May  5 07:05:04 kernel: Command List Table (128): virt 0x044169ab, phys 0x95be673c, size 2244608 bytes
May  5 07:05:04 kernel: Command List Control Table (8): 7fa9602f, 140288 bytes
May  5 07:05:04 kernel: Sysport Classifier: Max Flows = 17536 / 65536
May  5 07:05:04 kernel: Archer IQ status changed from 0 to 1
May  5 07:05:04 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17536^[[0m
May  5 07:05:04 kernel: Retrieve num_fhw_path=64
May  5 07:05:04 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 07:05:04 kernel: Enabled Archer binding to Flow Cache
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
May  5 07:05:04 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:04 kernel: bcmenet DT
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x0
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x1
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 56 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 57 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 58 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 59 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 60 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 61 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 62 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 63 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 64 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 65 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 66 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 67 to 0x00016000
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x1
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x2
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x3
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x8
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x5
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x8
May  5 07:05:04 kernel: Lift external switch (sw1) out of Reset
May  5 07:05:04 kernel: tr_find_sf2_sw : reset gpio done
May  5 07:05:04 kernel: LAG/Trunking enabled <0x08>
May  5 07:05:04 kernel: ephy_leds_init SW 0 Port 0 led idx 0 configured as:
May  5 07:05:04 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:04 kernel: ^[[0;30;102m=== Start of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May  5 07:05:04 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable IDDQ
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:04 kernel: INFO _merlin28_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable IDDQ
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:04 kernel: Toggle Serdes Core #0 LANE #0 PMD and uC reset.
May  5 07:05:04 kernel: INFO merlin28_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x1
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.a Set uc_active = 1 
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4. Assert micro reset 
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.a.2 Micro code load and verify 
May  5 07:05:04 kernel: merlin28_load_firmware(): INFO: Start to download firmware to core #   0
May  5 07:05:04 kernel: merlin28_load_firmware():  Checking init_done initial value passed...
May  5 07:05:04 kernel: merlin28_load_firmware():  Checking init_done passed ...
May  5 07:05:04 kernel: merlin28_load_firmware():  begin writing firmware to the program ram ...
May  5 07:05:04 kernel: #################################################################################
May  5 07:05:04 kernel: merlin28_load_firmware():  end writing firmware to the program ram ...
May  5 07:05:04 kernel: Micro code read back verification succeeded
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.b De-assert micro reset  
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.c wait for uc_dsc_ready_for_cmd = 1 
May  5 07:05:04 kernel: merlin28_mptwo_poll_uc_dsc_ready_for_cmd_equals_1():  micro is ready for command ...
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 8. PLL Configuration 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Initialize 9.375G VCO programming 
May  5 07:05:04 kernel: No option found for: "-d ML_REFCLK_156P25", added default value 0 in index 9
May  5 07:05:04 kernel: merlin28_speed_set_core(): PMD Setup 50MHz, 9.375GHz VCO programming 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 9. Configure Core level regsiter 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 10. Set core_congif_from_pcs 
May  5 07:05:04 kernel: merlin28_speed_set_core(): RAM variable vco_rate is 15 
May  5 07:05:04 kernel: merlin28_cfg_core_ram_var(): program core_config_word 0x1e to ram address 0x50 ...
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 9. Reset Datapath (core) 
May  5 07:05:04 kernel: merline28_datapath_get_core_out_reset(): Datapath Reset (core) in progress 
May  5 07:05:04 kernel: merlin28_check_pll_lock(): Checking Core #0 PLL Lock Status 
May  5 07:05:04 kernel: merlin28_check_pll_lock(): PLL Locked
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 10. Lane Configuration 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 13.a. Configure lane registers 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 13.b. Configure lane's micro RAM vaiables 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): RAM variable an_enabled is 0 
May  5 07:05:04 kernel: merlin28_cfg_lane_ram_var():  program lane_config_word 0x4 to ram address 0x400 ...
May  5 07:05:04 kernel: merlin28_lane_config_speed(#2):  
May  5 07:05:04 kernel: CONFIGURING FOR FORCE 1G
May  5 07:05:04 kernel: INFO merlin28_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:04 kernel: INFO merlin28_speed_set_core(): END Merlin Initialization procedure
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerup_lane(): powering up core #0x0 lane #0x0
May  5 07:05:04 kernel: INFO merlin28_serdes_init(): END Merlin Initialization procedure
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May  5 07:05:04 kernel: ^[[0;30;102m=== End of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May  5 07:05:04 kernel: LAG/Trunking enabled <0x08>
May  5 07:05:04 kernel: SYSPORT Host Binding Successfull
May  5 07:05:04 kernel: Archer CPU Affinity = 3
May  5 07:05:04 kernel: eth1      : Down          C8:7F:54:22:50:98 IntSw:P0 Lgcl: 0 LAN PHY_ID:0x08:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 IntSw:P1 Lgcl: 1     PHY_ID:0x01:OnChip RGMII NoApd    PwrUp      Unknown      2_EXTSW Cfg: FIX.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth0      : Down          C8:7F:54:22:50:98 IntSw:P5 Lgcl: 5 LAN      S1K2K
May  5 07:05:04 kernel:             PHY_ID:0x06:OnChip       ApdOn    PwrDn       5 Gbps    5GAE#L0.0 Cfg: ANG.  5 Gbps;             Down                                S1K2K5R:               S1K2K:           SGMII
May  5 07:05:04 kernel:             PHY_ID:0x19:Extrnl Cscde NoApd    PwrDn     2.5 Gbps       GPY211 Cfg: ANG.2.5 Gbps;             Dow
May  5 07:05:04 kernel: n                                  S1K2K:               S1K2K:          Uknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 IntSw:P8 Lgcl: 8     
May  5 07:05:04 kernel: eth2      : Down          C8:7F:54:22:50:98 ExtSw:P1 Lgcl: 9 LAN PHY_ID:0x01:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth3      : Down          C8:7F:54:22:50:98 ExtSw:P2 Lgcl:10 LAN PHY_ID:0x02:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth4      : Down          C8:7F:54:22:50:98 ExtSw:P3 Lgcl:11 LAN PHY_ID:0x03:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 ExtSw:P8 Lgcl:16     
May  5 07:05:04 kernel: logical_port 0: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
May  5 07:05:04 kernel: logical_port 1: intf_index 0, switch_index 0, phys_port 5 -> port_index 1, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 2: intf_index 0, switch_index 1, phys_port 1 -> port_index 2, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 3: intf_index 0, switch_index 1, phys_port 2 -> port_index 3, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 4: intf_index 0, switch_index 1, phys_port 3 -> port_index 4, nbr_of_queues 4
May  5 07:05:04 kernel: SYSPORT[0]: port[0] -> nbr_of_brcm_tags 1
May  5 07:05:04 kernel: SYSPORT[0]: port[1] -> nbr_of_brcm_tags 1
May  5 07:05:04 kernel: SYSPORT[0]: port[2] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0]: port[3] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0]: port[4] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0] = SWITCH_STACKED
May  5 07:05:04 kernel: RXQ[0]: IRQ 50, CPU 3
May  5 07:05:04 kernel: CSB Initialized: 0xdbabf000 (0xdbabf000), size 64 (128)
May  5 07:05:04 kernel: Ports 5, TDMA Rings 24
May  5 07:05:04 kernel: BCM6756_A1: ipg_length = 12 (0xe0882400 = 0x1)
May  5 07:05:04 kernel: Archer DMA Layer Initialized
May  5 07:05:04 kernel: Sysport Recycle Task: IRQ 51, CPU 3
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 
May  5 07:05:04 kernel: bcm_enet_init_post:L2413 ENET system contructed and configured enet-kthrd thread
May  5 07:05:04 kernel: enet_kthread_handler:L297 Instantiating ENET thread
May  5 07:05:04 kernel: bcm_mcast_init successful
May  5 07:05:04 kernel: Broadcom PCIe Host Controller Driver (impl1)^M
May  5 07:05:04 kernel:   bcm-pcie: DEF CFG: ssc 0x0, speed  0x0, bootorder 0x0, apon 0x0
May  5 07:05:04 kernel:   bcm-pcie:        : pwr 0x0, errlog 0x1111, msi 0x1111, acc  0x1111, pllclkid 0x3210
May  5 07:05:04 kernel:   bcm-pcie:        : loglevel 0x1 pllclkadj 0x0
May  5 07:05:04 kernel:   bcm-pcie: [1] DT node available: pcie@85000000
May  5 07:05:04 kernel:   bcm-pcie: found Port [1] GEN0 Core Rev [1.00] with 0 Lanes^M
May  5 07:05:04 kernel:   bcm-pcie: [1] vcore [0] initialized with [2] devices^M
May  5 07:05:04 kernel:   bcm-pcie: Core [0] DT node available: pcie0
May  5 07:05:04 kernel:   bcm-pcie: found Port [0] GEN2 Core Rev [4.02] with 2 Lanes^M
May  5 07:05:04 kernel: getrcal for res select 5, int 670, ext 640, ratio 122 ratio1 152, rcal 9
May  5 07:05:04 kernel:   bcm-pcie: Core [0] setting resistor calibration value to 0x9
May  5 07:05:04 kernel:   bcm-pcie: Core [0] link is DOWN^M
May  5 07:05:04 kernel:   bcm-pcie: Core [0] dev [0] powered down^M
May  5 07:05:04 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May  5 07:05:04 kernel: brcm_otp_init entry
May  5 07:05:04 kernel: emf: Unknown symbol osl_malloc (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_pktdup_cpy (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_mfree (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol linux_pktfree (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_pktdup (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_wmf_scbfind (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_malloc (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_detach (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_rtport_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_attach (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_rtport_add (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_mfree (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May  5 07:05:04 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:04 kernel: Loading wlshared Module...
May  5 07:05:04 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May  5 07:05:04 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May  5 07:05:04 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May  5 07:05:04 kernel: Loading HND Module
May  5 07:05:04 kernel: igs_module_init:840:	 IGS 29 create network socket successful
May  5 07:05:04 kernel: osl_skb_audit: PASS 
May  5 07:05:04 kernel: wl_module_init: passivemode set to 0x1
May  5 07:05:04 kernel: wl_module_init: txworkq set to 0x0
May  5 07:05:04 kernel: ^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May  5 07:05:04 kernel: si_doattach: using BAR0 value: enum_base=85000000
May  5 07:05:04 kernel: BME Service Initialization
May  5 07:05:04 kernel: BME: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:04 kernel: M2M: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M: SUCCESS eng 0 alloc rings <6fb7d44c,106e8497>,3c857d9e depth 256
May  5 07:05:04 kernel: M2M: SUCCESS eng 1 alloc rings <d32ee03a,86b5dba1>,8dbebfd1 depth 256
May  5 07:05:04 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0 
May  5 07:05:04 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May  5 07:05:04 kernel: CSIMON module registered
May  5 07:05:04 kernel: wl0_awl attach successful tx: 1, rx: 2
May  5 07:05:04 kernel: WL_FLCTL[0] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May  5 07:05:04 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
May  5 07:05:04 kernel: Archer WLAN XFER Thread 0 Initialized
May  5 07:05:04 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May  5 07:05:04 kernel: eth5: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth5 registered 
May  5 07:05:04 kernel: si_doattach: using BAR0 value: enum_base=86000000
May  5 07:05:04 kernel: BME Service Initialization
May  5 07:05:04 kernel: BME: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:04 kernel: M2M: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M: SUCCESS eng 0 alloc rings <9c91757e,41b2e102>,1803662d depth 256
May  5 07:05:04 kernel: M2M: SUCCESS eng 1 alloc rings <05f376e1,55fca25e>,14c69b1f depth 256
May  5 07:05:04 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0 
May  5 07:05:04 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May  5 07:05:04 kernel: CSIMON module registered
May  5 07:05:04 kernel: wl1_awl attach successful tx: 1, rx: 2
May  5 07:05:04 kernel: WL_FLCTL[1] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May  5 07:05:04 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
May  5 07:05:04 kernel: Archer WLAN XFER Thread 1 Initialized
May  5 07:05:04 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
May  5 07:05:04 kernel: eth6: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth6 registered 
May  5 07:05:04 kernel: bcm_bca_usb_ctrl_probe: usb3_enable 1 xhci_enable 1
May  5 07:05:04 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: Wowl not supported (-23)
May  5 07:05:07 kernel: Updating to new country DE
May  5 07:05:07 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: CSIMON: M2M usr already registered ...
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: Wowl not supported (-23)
May  5 07:05:08 kernel: eth1 (Int switch port: 0) (Logical Port: 0) (phyId: 8) Link Up at 1000 mbps full duplex
May  5 07:05:09 rc_service: service 2005:notify_rc restart_firewall
May  5 07:05:09 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:09 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:09 kernel: CSIMON: M2M usr already registered ...
May  5 07:05:09 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
May  5 07:05:12 WAN(0) Connection: WAN(0) link down.
May  5 07:05:14 wlceventd: main(1239): wlceventd Start...
May  5 07:05:14 acsd: eth5: Selecting 2g band ACS policy
May  5 07:05:14 TUF-AX3000_V2: start httpd:80
May  5 07:05:14 avahi-daemon[2086]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 07:05:14 disk monitor: be idle
May  5 07:05:14 httpd: Save SSL certificate...80
May  5 07:05:14 hour monitor: daemon is starting
May  5 07:05:14 hour monitor: daemon terminates
May  5 07:05:14 httpd: mssl_cert_key_match : PASS
May  5 07:05:14 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:14 miniupnpd[2123]: HTTP listening on port 44415
May  5 07:05:15 miniupnpd[2123]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:15 httpd: Succeed to init SSL certificate...80
May  5 07:05:15 avahi-daemon[2086]: Alias name "TUF-AX3000_V2" successfully established.
May  5 07:05:17 kernel: SCSI subsystem initialized
May  5 07:05:17 modprobe: module scsi_wait_scan not found in modules.dep
May  5 07:05:17 modprobe: module mbcache not found in modules.dep
May  5 07:05:17 modprobe: module jbd not found in modules.dep
May  5 07:05:17 modprobe: module ext3 not found in modules.dep
May  5 07:05:17 modprobe: module ext4 not found in modules.dep
May  5 07:05:17 modprobe: module ext2 not found in modules.dep
May  5 07:05:17 kernel: tfat: loading out-of-tree module taints kernel.
May  5 07:05:17 Mastiff: init
May  5 07:05:18 modprobe: module btusbdrv not found in modules.dep
May  5 07:05:18 ahs: [read_json]Update ahs JSON file.
May  5 07:05:18 init: fwver: 3.0.0.4_388_23785-g6bb7c92 (sn:NCIG59601301DXD /ha:C8:7F:54:22:50:98 )
May  5 07:05:18 acsd: eth5: selected channel spec: 0x1008 (8)
May  5 07:05:18 acsd: eth5: Adjusted channel spec: 0x1008 (8)
May  5 07:05:18 acsd: eth5: selected channel spec: 0x1008 (8)
May  5 07:05:22 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:24 wan: finish adding multi routes
May  5 07:05:24 BONDING: option disabled
May  5 07:05:24 roamast: ROAMING Start...
May  5 07:05:24 WAN(0) Connection: WAN was restored.
May  5 07:05:25 miniupnpd[2123]: shutting down MiniUPnPd
May  5 07:05:25 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:25 miniupnpd[2407]: HTTP listening on port 43975
May  5 07:05:25 miniupnpd[2407]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:25 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:25 rc_service: udhcpc_wan 2344:notify_rc stop_samba
May  5 07:05:25 rc_service: udhcpc_wan 2344:notify_rc start_samba
May  5 07:05:25 rc_service: waitting "stop_samba" via udhcpc_wan ...
May  5 07:05:25 Samba Server: smb daemon is stopped
May  5 07:05:26 wan_up: Find a 2.5G port on [eth0]
May  5 07:05:27 ntp: start NTP update
May  5 07:05:27 GPY211: ### GPY211 WAR 1G : eth0 ###
May  5 07:05:28 ping_target_with_size: Ping test is complete.
May  5 07:05:28 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 281869 seconds.
May  5 07:05:28 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link DOWN.
May  5 07:05:29 ping_target_with_size: Failed to ping target(80.108.102.1) with size(79)
May  5 07:05:31 ping_target_with_size: Ping test is complete.
May  5 07:05:31 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 281869 seconds.
May  5 07:05:32 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:32 ping_target_with_size: Failed to ping target(80.108.102.1) with size(80)
May  5 07:05:32 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 281869 seconds.
May  5 07:05:37 GPY211: ### GPY211 WAR AUTO : eth0 ###
May  5 07:05:38 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link DOWN.
May  5 07:05:39 WAN(0) Connection: WAN(0) link down.
May  5 07:05:43 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:46 WAN(0) Connection: WAN(0) link up.
May  5 07:05:46 rc_service: wanduck 1351:notify_rc restart_wan_if 0
May  5 07:05:50 wan: finish adding multi routes
May  5 07:05:50 miniupnpd[2407]: shutting down MiniUPnPd
May  5 07:05:50 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:51 miniupnpd[3124]: HTTP listening on port 35191
May  5 07:05:51 WAN(0) Connection: WAN was restored.
May  5 07:05:51 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:51 rc_service: udhcpc_wan 3080:notify_rc stop_samba
May  5 07:05:51 rc_service: udhcpc_wan 3080:notify_rc start_samba
May  5 07:05:51 rc_service: waitting "stop_samba" via udhcpc_wan ...
May  5 07:05:51 miniupnpd[3124]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:51 Samba Server: smb daemon is stopped
May  5 07:05:52 wan_up: Find a 2.5G port on [eth0]
May  5 07:05:53 ping_target_with_size: Ping test is complete.
May  5 07:05:53 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3600 seconds.
May  5 07:05:53 ntp: start NTP update
Aug 27 08:46:30 rc_service: ntp 2381:notify_rc restart_diskmon
Aug 27 08:46:30 disk_monitor: Finish
Aug 27 08:46:30 disk monitor: be idle
Aug 27 08:46:31 ping_target_with_size: Successful to ping target(80.108.102.1) with size(79)
Aug 27 08:46:31 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3600 seconds.
Aug 27 08:46:36 crond[2068]: time disparity of 3320741 minutes detected
Aug 27 08:46:37 wlceventd: wlceventd_proc_event(685): eth5: Auth BC:D0:74:2E:73:45, status: Successful (0), rssi:0
Aug 27 08:46:37 wlceventd: wlceventd_proc_event(722): eth5: Assoc BC:D0:74:2E:73:45, status: Successful (0), rssi:-74
Aug 27 08:47:59 rc_service: httpd 2069:notify_rc stop_upgrade
Aug 27 08:47:59 usb: USB is ejected
Aug 27 08:47:59 WEBDAV Server: daemon is stoped
Aug 27 08:47:59 WEBDAV Server: arpping daemon is stoped
Aug 27 08:47:59 iTunes: daemon is stoped
Aug 27 08:47:59 FTP Server: daemon is stopped
Aug 27 08:47:59 Samba Server: smb daemon is stopped
Aug 27 08:47:59 Timemachine: daemon is stoped
Aug 27 08:47:59 WEBDAV Server: daemon is stoped
Aug 27 08:47:59 iTunes: daemon is stoped
Aug 27 08:47:59 FTP Server: daemon is stopped
Aug 27 08:47:59 Samba Server: smb daemon is stopped
Aug 27 08:47:59 Timemachine: daemon is stoped
Aug 27 08:48:02 miniupnpd[3124]: shutting down MiniUPnPd
Aug 27 08:48:02 ahs: ===Terminate ahs daemon===
Aug 27 08:48:03 disk_monitor: Finish
Aug 27 08:48:03 Mastiff: Got SIGTERM
Aug 27 08:48:25 rc_service: httpd 2069:notify_rc start_upgrade
Aug 27 08:48:25 WEBDAV Server: daemon is stoped
Aug 27 08:48:25 FTP Server: daemon is stopped
Aug 27 08:48:25 Samba Server: smb daemon is stopped
Aug 27 08:48:25 Timemachine: daemon is stoped
Aug 27 08:48:25 lldpd[2144]: unable to send shutdown LLDPDU on eth6
Aug 27 08:48:25 kernel: wl0: random key value: 8C9D4A94AE98290053AD010CBA3F3F654FDD4BFEFC7E007D4D6FB4896F6633EB
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: Event handler is not created
Aug 27 08:48:25 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Aug 27 08:48:25 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Aug 27 08:48:25 kernel: CSIMON: M2M usr already registered ...
Aug 27 08:48:26 kernel: Event handler is not created
Aug 27 08:48:26 kernel: Event handler is not created
Aug 27 08:48:26 kernel: Event handler is not created
Aug 27 08:48:26 kernel: Wowl not supported (-23)
Aug 27 08:48:31 kernel: port_generic_stop 572 skip turnning off power on eth1 here
Aug 27 08:48:31 kernel: port_generic_stop 572 skip turnning off power on eth2 here
Aug 27 08:48:31 kernel: port_generic_stop 572 skip turnning off power on eth3 here
Aug 27 08:48:31 kernel: port_generic_stop 572 skip turnning off power on eth4 here
Aug 27 08:48:31 kernel: In wl_dfs_cac_notify_status chanspec 0x1008 DFS state 0
Aug 27 08:48:32 get_ext_phy_id: 2/1/0/0
May  5 07:05:04 kernel: klogd started: BusyBox v1.24.1 (2023-07-29 16:15:51 CST)
May  5 07:05:04 kernel: Linux version 4.19.183 (gitserv_asus@bpza001bud) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Sat Jul 29 16:17:43 CST 2023
May  5 07:05:04 kernel: random: get_random_bytes called from start_kernel+0x9c/0x490 with crng_init=0
May  5 07:05:04 kernel: Kernel command line: console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe isolcpus=3 rootwait mtdparts=spi1.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_6 ubi.mtd=image ubi.block=0,6 rootfstype=squashfs cma=0M
May  5 07:05:04 kernel: Virtual kernel memory layout:
May  5 07:05:04 kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
May  5 07:05:04 kernel:     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
May  5 07:05:04 kernel:     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
May  5 07:05:04 kernel:     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
May  5 07:05:04 kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
May  5 07:05:04 kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
May  5 07:05:04 kernel:       .text : 0x(ptrval) - 0x(ptrval)   (8160 kB)
May  5 07:05:04 kernel:       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
May  5 07:05:04 kernel:       .data : 0x(ptrval) - 0x(ptrval)   ( 255 kB)
May  5 07:05:04 kernel:        .bss : 0x(ptrval) - 0x(ptrval)   ( 311 kB)
May  5 07:05:04 kernel: CCI hardware cache coherency enabled
May  5 07:05:04 kernel: bootloader version  U-Boot 2019.07 (Jul 29 2023 - 17:59:49 +0800), Build: 5.04L.0
May  5 07:05:04 kernel: inMemNvramData.szBoardId TUF_AX3000_V2
May  5 07:05:04 kernel: size of sk_buff 368
May  5 07:05:04 kernel: offset of cb in sk_buff 256
May  5 07:05:04 kernel: PMC driver initcall
May  5 07:05:04 kernel: PMC driver scanning DT
May  5 07:05:04 kernel: pmc match PMC brcm,bca-pmc-3-2
May  5 07:05:04 kernel:      Remapping PMC IO memories...
May  5 07:05:04 kernel:              phys              virt          size
May  5 07:05:04 kernel:      0x0000000080301018 0x00000000e0878018 0x00005080
May  5 07:05:04 kernel:      0x0000000080320000 0x00000000e0911000 0x00000240
May  5 07:05:04 kernel:      0x0000000080300400 0x00000000e0913400 0x000005d0
May  5 07:05:04 kernel:      0x0000000080380000 0x00000000e0915000 0x00001000
May  5 07:05:04 kernel: pmc_init:PMC using DQM mode
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 22
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 23
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 24
May  5 07:05:04 kernel: map_hw_timer_interrupt,162: interrupt_id 25
May  5 07:05:04 kernel: Allocated EXT_TIMER number 3
May  5 07:05:04 kernel: Broadcom Timer Initialized
May  5 07:05:04 kernel: Broadcom GBPM v0.1 initialized
May  5 07:05:04 kernel: Broadcom IQoS v1.0 initialized
May  5 07:05:04 kernel: Broadcom Logger v0.1
May  5 07:05:04 kernel: /dev/bcmnet Char device registered
May  5 07:05:04 kernel: skb_free_task created successfully with start budget 256
May  5 07:05:04 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 07:05:04 kernel: BLOG Rule v1.0 Initialized
May  5 07:05:04 kernel: Skip Legacy Led init
May  5 07:05:04 kernel: Initialise system trusted keyrings
May  5 07:05:04 kernel: Key type asymmetric registered
May  5 07:05:04 kernel: Asymmetric key parser 'x509' registered
May  5 07:05:04 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May  5 07:05:04 kernel: SPINAND ID 
May  5 07:05:04 kernel: 0x2c 
May  5 07:05:04 kernel: 0x24 
May  5 07:05:04 kernel: 0x2c 
May  5 07:05:04 kernel: 0x24 
May  5 07:05:04 kernel: MICRON
May  5 07:05:04 kernel:  MT29F2G01AB
May  5 07:05:04 kernel: 3 cmdlinepart partitions found on MTD device spi1.0
May  5 07:05:04 kernel: Creating 3 MTD partitions on "spi1.0":
May  5 07:05:04 kernel: 0x000000000000-0x000000200000 : "loader"
May  5 07:05:04 kernel: 0x000000200000-0x00000fe00000 : "image"
May  5 07:05:04 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May  5 07:05:04 kernel: brcmboard registered
May  5 07:05:04 kernel: brcmboard: brcm_board_init entry
May  5 07:05:04 kernel: Last RESET due to SW reset
May  5 07:05:04 kernel: RESET reason: 0x80000000
May  5 07:05:04 kernel: DYING GASP IRQ Initialized and Enabled
May  5 07:05:04 kernel: bcm_i2c: Error in loading module
May  5 07:05:04 kernel: init procfs
May  5 07:05:04 kernel: Bridge Broadcom hooks registered
May  5 07:05:04 kernel: Registering SWP/SWPB emulation handler
May  5 07:05:04 kernel: Loading compiled-in X.509 certificates
May  5 07:05:04 kernel: ubi0: attaching mtd2
May  5 07:05:04 kernel: ubi0: scanning is finished
May  5 07:05:04 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May  5 07:05:04 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 07:05:04 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 07:05:04 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 07:05:04 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May  5 07:05:04 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May  5 07:05:04 kernel: ubi0: max/mean erase counter: 41/18, WL threshold: 4096, image sequence number: 1687183831
May  5 07:05:04 kernel: ubi0: available PEBs: 422, total reserved PEBs: 1594, PEBs reserved for bad PEB handling: 40
May  5 07:05:04 kernel: ubi0: background thread "ubi_bgt0d" started, PID 104
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x8
May  5 07:05:04 kernel: Registered phy device: GPY211:0x19
May  5 07:05:04 kernel: Registered phy device: 5GAE:0x6
May  5 07:05:04 kernel: Registered phy device: 5GAE:0x7
May  5 07:05:04 kernel: Registered phy device: MAC2MAC:0x1
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x1
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x2
May  5 07:05:04 kernel: Registered phy device: EGPHY:0x3
May  5 07:05:04 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 200
May  5 07:05:04 kernel: UBIFS (ubi0:10): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:10): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May  5 07:05:04 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 1609246B-13E9-4D4C-BC91-FFFA4BA17D4B, small LPT model
May  5 07:05:04 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 216
May  5 07:05:04 kernel: UBIFS (ubi0:11): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:11): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May  5 07:05:04 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID 29044A01-979E-405A-A47B-E6A108712C6B, small LPT model
May  5 07:05:04 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 246
May  5 07:05:04 kernel: UBIFS (ubi0:13): recovery needed
May  5 07:05:04 kernel: UBIFS (ubi0:13): recovery completed
May  5 07:05:04 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May  5 07:05:04 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:04 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May  5 07:05:04 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May  5 07:05:04 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID BE885C4A-5B19-4475-8652-4D51BDD7CAE0, small LPT model
May  5 07:05:04 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 07:05:04 kernel: Disabling lock debugging due to kernel taint
May  5 07:05:04 kernel: BCMLIBS loaded...
May  5 07:05:04 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: Scratch pad is not initialized.
May  5 07:05:04 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:3447^[[0m
May  5 07:05:04 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 3447^[[0m
May  5 07:05:04 kernel: License chip name: 6756 serial number: 000000000000000000000000
May  5 07:05:04 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 07:05:04 kernel: Broadcom Ingress QoS Module  Char Driver v1.0 Registered<303>^[[0m
May  5 07:05:04 kernel: Broadcom Ingress QoS v1.0 initialized
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<63>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May  5 07:05:04 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May  5 07:05:04 kernel: npe_max_entries<35072>
May  5 07:05:04 kernel: Bind blog_notify_evt_enqueue_fn[<bf0e08bc>]
May  5 07:05:04 kernel: fc_evt task created successfully
May  5 07:05:04 kernel: max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5 
May  5 07:05:04 kernel: NBUFF v1.0 Initialized
May  5 07:05:04 kernel: fcache: mcast_max_groups<128> mcast_max_clients_per_group<63> mcast_max_clients<1024>
May  5 07:05:04 kernel: fcache: mcast_max_ent<1152>
May  5 07:05:04 kernel: fcache: ucast_max_ent<16384>
May  5 07:05:04 kernel: fcache: max_ent<17536>
May  5 07:05:04 kernel: ^[[0;36;44mTotal # of labels = 77^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 07:05:04 kernel: 	Pkt HW acceleration is disabled/unavailable.
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<302>^[[0m
May  5 07:05:04 kernel: fc_timer_task created successfully
May  5 07:05:04 kernel: 	Pkt HW acceleration is disabled/unavailable.
May  5 07:05:04 kernel: Created Proc FS /procfs/fcache
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 07:05:04 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xefbf721c]=0^[[0m
May  5 07:05:04 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 07:05:04 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May  5 07:05:04 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 07:05:04 kernel: Broadcom Command List Driver v1.0
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May  5 07:05:04 kernel: Open archer Netdevice
May  5 07:05:04 kernel: Archer DS DPI Initialized
May  5 07:05:04 kernel: Archer US DPI Initialized
May  5 07:05:04 kernel: Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10)
May  5 07:05:04 kernel: Archer WLAN Rx Thread Initialized
May  5 07:05:04 kernel: Sysport 0 WOL IRQ 55
May  5 07:05:04 kernel: Sysport Driver User IRQ: 0x80498284
May  5 07:05:04 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
May  5 07:05:04 kernel: SYSPORT User IRQ: interrupt_id 54, controller 4 (phys 0x80498284)
May  5 07:05:04 kernel: archer_dhd_processing_construct: Mon Jul 25 15:49:33 CST 2022 []
May  5 07:05:04 kernel: archer_dhd_processing_construct: 5c3593d8f15dd00c6085f7b2a50a0285
May  5 07:05:04 kernel: Archer DHD Initialized
May  5 07:05:04 kernel: Archer Mode set to L2+L3
May  5 07:05:04 kernel: Archer Mode set to L2+L3
May  5 07:05:04 kernel: Initialized Archer Host Layer
May  5 07:05:04 kernel: Flow Table (160, 40): 6f6e4864, 2621440 bytes
May  5 07:05:04 kernel: Flow Info Table (44, 65536): 7839e9e5, 2883584 bytes
May  5 07:05:04 kernel: Command List Table (128): virt 0xec1e527a, phys 0x565d6cbe, size 2244608 bytes
May  5 07:05:04 kernel: Command List Control Table (8): 546874c5, 140288 bytes
May  5 07:05:04 kernel: Sysport Classifier: Max Flows = 17536 / 65536
May  5 07:05:04 kernel: Archer IQ status changed from 0 to 1
May  5 07:05:04 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17536^[[0m
May  5 07:05:04 kernel: Retrieve num_fhw_path=64
May  5 07:05:04 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 07:05:04 kernel: Enabled Archer binding to Flow Cache
May  5 07:05:04 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
May  5 07:05:04 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:04 kernel: bcmenet DT
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x0
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x1
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 56 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 57 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 58 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 59 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 60 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 61 to 0x00006000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 62 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 63 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 64 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 65 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 66 to 0x00016000
May  5 07:05:04 kernel: set RGMII pad ctrl for GPIO 67 to 0x00016000
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x1
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x2
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x3
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x8
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x5
May  5 07:05:04 kernel: Registered mac device: SF2MAC:0x8
May  5 07:05:04 kernel: Lift external switch (sw1) out of Reset
May  5 07:05:04 kernel: tr_find_sf2_sw : reset gpio done
May  5 07:05:04 kernel: LAG/Trunking enabled <0x08>
May  5 07:05:04 kernel: ephy_leds_init SW 0 Port 0 led idx 0 configured as:
May  5 07:05:04 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:04 kernel: ^[[0;30;102m=== Start of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May  5 07:05:04 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable IDDQ
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:04 kernel: INFO _merlin28_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable IDDQ
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:04 kernel: INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:04 kernel: Toggle Serdes Core #0 LANE #0 PMD and uC reset.
May  5 07:05:04 kernel: INFO merlin28_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x1
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.a Set uc_active = 1 
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4. Assert micro reset 
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.a.2 Micro code load and verify 
May  5 07:05:04 kernel: merlin28_load_firmware(): INFO: Start to download firmware to core #   0
May  5 07:05:04 kernel: merlin28_load_firmware():  Checking init_done initial value passed...
May  5 07:05:04 kernel: merlin28_load_firmware():  Checking init_done passed ...
May  5 07:05:04 kernel: merlin28_load_firmware():  begin writing firmware to the program ram ...
May  5 07:05:04 kernel: #################################################################################
May  5 07:05:04 kernel: merlin28_load_firmware():  end writing firmware to the program ram ...
May  5 07:05:04 kernel: Micro code read back verification succeeded
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.b De-assert micro reset  
May  5 07:05:04 kernel: merlin28_serdes_init(): Step 4.c wait for uc_dsc_ready_for_cmd = 1 
May  5 07:05:04 kernel: merlin28_mptwo_poll_uc_dsc_ready_for_cmd_equals_1():  micro is ready for command ...
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 8. PLL Configuration 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Initialize 9.375G VCO programming 
May  5 07:05:04 kernel: No option found for: "-d ML_REFCLK_156P25", added default value 0 in index 9
May  5 07:05:04 kernel: merlin28_speed_set_core(): PMD Setup 50MHz, 9.375GHz VCO programming 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 9. Configure Core level regsiter 
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 10. Set core_congif_from_pcs 
May  5 07:05:04 kernel: merlin28_speed_set_core(): RAM variable vco_rate is 15 
May  5 07:05:04 kernel: merlin28_cfg_core_ram_var(): program core_config_word 0x1e to ram address 0x50 ...
May  5 07:05:04 kernel: merlin28_speed_set_core(): Step 9. Reset Datapath (core) 
May  5 07:05:04 kernel: merline28_datapath_get_core_out_reset(): Datapath Reset (core) in progress 
May  5 07:05:04 kernel: merlin28_check_pll_lock(): Checking Core #0 PLL Lock Status 
May  5 07:05:04 kernel: merlin28_check_pll_lock(): PLL Locked
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 10. Lane Configuration 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 13.a. Configure lane registers 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): Step 13.b. Configure lane's micro RAM vaiables 
May  5 07:05:04 kernel: merlin28_lane_config_speed(): RAM variable an_enabled is 0 
May  5 07:05:04 kernel: merlin28_cfg_lane_ram_var():  program lane_config_word 0x4 to ram address 0x400 ...
May  5 07:05:04 kernel: merlin28_lane_config_speed(#2):  
May  5 07:05:04 kernel: CONFIGURING FOR FORCE 1G
May  5 07:05:04 kernel: INFO merlin28_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:04 kernel: INFO merlin28_speed_set_core(): END Merlin Initialization procedure
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerup_lane(): powering up core #0x0 lane #0x0
May  5 07:05:04 kernel: INFO merlin28_serdes_init(): END Merlin Initialization procedure
May  5 07:05:04 kernel: MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May  5 07:05:04 kernel: ^[[0;30;102m=== End of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May  5 07:05:04 kernel: LAG/Trunking enabled <0x08>
May  5 07:05:04 kernel: SYSPORT Host Binding Successfull
May  5 07:05:04 kernel: Archer CPU Affinity = 3
May  5 07:05:04 kernel: eth1      : Down          C8:7F:54:22:50:98 IntSw:P0 Lgcl: 0 LAN PHY_ID:0x08:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 IntSw:P1 Lgcl: 1     PHY_ID:0x01:OnChip RGMII NoApd    PwrUp      Unknown      2_EXTSW Cfg: FIX.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth0      : Down          C8:7F:54:22:50:98 IntSw:P5 Lgcl: 5 LAN      S1K2K
May  5 07:05:04 kernel:             PHY_ID:0x06:OnChip       ApdOn    PwrDn       5 Gbps    5GAE#L0.0 Cfg: ANG.  5 Gbps;             Down                                S1K2K5R:               S1K2K:           SGMII
May  5 07:05:04 kernel:             PHY_ID:0x19:Extrnl Cscde NoApd    PwrDn     2.5 Gbps       GPY211 Cfg: ANG.2.5 Gbps;             Dow
May  5 07:05:04 kernel: n                                  S1K2K:               S1K2K:          Uknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 IntSw:P8 Lgcl: 8     
May  5 07:05:04 kernel: eth2      : Down          C8:7F:54:22:50:98 ExtSw:P1 Lgcl: 9 LAN PHY_ID:0x01:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth3      : Down          C8:7F:54:22:50:98 ExtSw:P2 Lgcl:10 LAN PHY_ID:0x02:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: eth4      : Down          C8:7F:54:22:50:98 ExtSw:P3 Lgcl:11 LAN PHY_ID:0x03:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:04 kernel: <IntnlDev>:   Up   1 Gbps 00:00:00:00:00:00 ExtSw:P8 Lgcl:16     
May  5 07:05:04 kernel: logical_port 0: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
May  5 07:05:04 kernel: logical_port 1: intf_index 0, switch_index 0, phys_port 5 -> port_index 1, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 2: intf_index 0, switch_index 1, phys_port 1 -> port_index 2, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 3: intf_index 0, switch_index 1, phys_port 2 -> port_index 3, nbr_of_queues 4
May  5 07:05:04 kernel: logical_port 4: intf_index 0, switch_index 1, phys_port 3 -> port_index 4, nbr_of_queues 4
May  5 07:05:04 kernel: SYSPORT[0]: port[0] -> nbr_of_brcm_tags 1
May  5 07:05:04 kernel: SYSPORT[0]: port[1] -> nbr_of_brcm_tags 1
May  5 07:05:04 kernel: SYSPORT[0]: port[2] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0]: port[3] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0]: port[4] -> nbr_of_brcm_tags 2
May  5 07:05:04 kernel: SYSPORT[0] = SWITCH_STACKED
May  5 07:05:04 kernel: RXQ[0]: IRQ 50, CPU 3
May  5 07:05:04 kernel: CSB Initialized: 0xdb90f000 (0xdb90f000), size 64 (128)
May  5 07:05:04 kernel: Ports 5, TDMA Rings 24
May  5 07:05:04 kernel: BCM6756_A1: ipg_length = 12 (0xe0882400 = 0x1)
May  5 07:05:04 kernel: Archer DMA Layer Initialized
May  5 07:05:04 kernel: Sysport Recycle Task: IRQ 51, CPU 3
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 
May  5 07:05:04 kernel: bcm_enet_init_post:L2413 ENET system contructed and configured enet-kthrd thread
May  5 07:05:04 kernel: enet_kthread_handler:L297 Instantiating ENET thread
May  5 07:05:04 kernel: bcm_mcast_init successful
May  5 07:05:04 kernel: Broadcom PCIe Host Controller Driver (impl1)^M
May  5 07:05:04 kernel:   bcm-pcie: DEF CFG: ssc 0x0, speed  0x0, bootorder 0x0, apon 0x0
May  5 07:05:04 kernel:   bcm-pcie:        : pwr 0x0, errlog 0x1111, msi 0x1111, acc  0x1111, pllclkid 0x3210
May  5 07:05:04 kernel:   bcm-pcie:        : loglevel 0x1 pllclkadj 0x0
May  5 07:05:04 kernel:   bcm-pcie: [1] DT node available: pcie@85000000
May  5 07:05:04 kernel:   bcm-pcie: found Port [1] GEN0 Core Rev [1.00] with 0 Lanes^M
May  5 07:05:04 kernel:   bcm-pcie: [1] vcore [0] initialized with [2] devices^M
May  5 07:05:04 kernel:   bcm-pcie: Core [0] DT node available: pcie0
May  5 07:05:04 kernel:   bcm-pcie: found Port [0] GEN2 Core Rev [4.02] with 2 Lanes^M
May  5 07:05:04 kernel: getrcal for res select 5, int 669, ext 640, ratio 122 ratio1 152, rcal 9
May  5 07:05:04 kernel:   bcm-pcie: Core [0] setting resistor calibration value to 0x9
May  5 07:05:04 kernel:   bcm-pcie: Core [0] link is DOWN^M
May  5 07:05:04 kernel:   bcm-pcie: Core [0] dev [0] powered down^M
May  5 07:05:04 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May  5 07:05:04 kernel: brcm_otp_init entry
May  5 07:05:04 kernel: emf: Unknown symbol osl_malloc (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_pktdup_cpy (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_mfree (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol linux_pktfree (err -2)
May  5 07:05:04 kernel: emf: Unknown symbol osl_pktdup (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_wmf_scbfind (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_malloc (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_detach (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_rtport_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_attach (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_rtport_add (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol osl_mfree (err -2)
May  5 07:05:04 kernel: igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May  5 07:05:04 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:04 kernel: Loading wlshared Module...
May  5 07:05:04 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May  5 07:05:04 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May  5 07:05:04 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May  5 07:05:04 kernel: Loading HND Module
May  5 07:05:04 kernel: igs_module_init:840:	 IGS 29 create network socket successful
May  5 07:05:04 kernel: osl_skb_audit: PASS 
May  5 07:05:04 kernel: wl_module_init: passivemode set to 0x1
May  5 07:05:04 kernel: wl_module_init: txworkq set to 0x0
May  5 07:05:04 kernel: ^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May  5 07:05:04 kernel: si_doattach: using BAR0 value: enum_base=85000000
May  5 07:05:04 kernel: BME Service Initialization
May  5 07:05:04 kernel: BME: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:04 kernel: M2M: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M: SUCCESS eng 0 alloc rings <daba3b37,440bb57b>,696e3755 depth 256
May  5 07:05:04 kernel: M2M: SUCCESS eng 1 alloc rings <8c8e1a23,2489418a>,878a574e depth 256
May  5 07:05:04 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0 
May  5 07:05:04 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May  5 07:05:04 kernel: CSIMON module registered
May  5 07:05:04 kernel: wl0_awl attach successful tx: 1, rx: 2
May  5 07:05:04 kernel: WL_FLCTL[0] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May  5 07:05:04 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
May  5 07:05:04 kernel: Archer WLAN XFER Thread 0 Initialized
May  5 07:05:04 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May  5 07:05:04 kernel: eth5: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth5 registered 
May  5 07:05:04 kernel: si_doattach: using BAR0 value: enum_base=86000000
May  5 07:05:04 kernel: BME Service Initialization
May  5 07:05:04 kernel: BME: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:04 kernel: M2M: M2M Core id 0x844 rev 132
May  5 07:05:04 kernel: M2M: SUCCESS eng 0 alloc rings <de1f041e,e16671d0>,87921d84 depth 256
May  5 07:05:04 kernel: M2M: SUCCESS eng 1 alloc rings <24fe2044,e8a70dd1>,d317f35f depth 256
May  5 07:05:04 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:04 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:04 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0 
May  5 07:05:04 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May  5 07:05:04 kernel: CSIMON module registered
May  5 07:05:04 kernel: wl1_awl attach successful tx: 1, rx: 2
May  5 07:05:04 kernel: WL_FLCTL[1] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May  5 07:05:04 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
May  5 07:05:04 kernel: Archer WLAN XFER Thread 1 Initialized
May  5 07:05:04 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
May  5 07:05:04 kernel: eth6: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:04 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth6 registered 
May  5 07:05:04 kernel: bcm_bca_usb_ctrl_probe: usb3_enable 1 xhci_enable 1
May  5 07:05:04 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: Wowl not supported (-23)
May  5 07:05:07 kernel: Updating to new country DE
May  5 07:05:07 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: CSIMON: M2M usr already registered ...
May  5 07:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:07 kernel: Wowl not supported (-23)
May  5 07:05:09 kernel: eth1 (Int switch port: 0) (Logical Port: 0) (phyId: 8) Link Up at 1000 mbps full duplex
May  5 07:05:09 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:09 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:09 kernel: CSIMON: M2M usr already registered ...
May  5 07:05:09 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
May  5 07:05:12 WAN(0) Connection: WAN(0) link down.
May  5 07:05:14 wlceventd: main(1239): wlceventd Start...
May  5 07:05:14 acsd: eth5: Selecting 2g band ACS policy
May  5 07:05:14 TUF-AX3000_V2: start httpd:80
May  5 07:05:14 avahi-daemon[2084]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 07:05:14 httpd: Save SSL certificate...80
May  5 07:05:14 disk monitor: be idle
May  5 07:05:14 hour monitor: daemon is starting
May  5 07:05:14 hour monitor: daemon terminates
May  5 07:05:14 httpd: mssl_cert_key_match : PASS
May  5 07:05:14 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:14 miniupnpd[2117]: HTTP listening on port 33091
May  5 07:05:14 miniupnpd[2117]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:15 httpd: Succeed to init SSL certificate...80
May  5 07:05:15 avahi-daemon[2084]: Alias name "TUF-AX3000_V2" successfully established.
May  5 07:05:17 kernel: SCSI subsystem initialized
May  5 07:05:17 modprobe: module scsi_wait_scan not found in modules.dep
May  5 07:05:17 modprobe: module mbcache not found in modules.dep
May  5 07:05:17 modprobe: module jbd not found in modules.dep
May  5 07:05:17 modprobe: module ext3 not found in modules.dep
May  5 07:05:17 modprobe: module ext4 not found in modules.dep
May  5 07:05:17 modprobe: module ext2 not found in modules.dep
May  5 07:05:17 kernel: tfat: loading out-of-tree module taints kernel.
May  5 07:05:17 Mastiff: init
May  5 07:05:17 modprobe: module btusbdrv not found in modules.dep
May  5 07:05:17 ahs: [read_json]Update ahs JSON file.
May  5 07:05:18 init: fwver: 3.0.0.4_388_23785-g6bb7c92 (sn:NCIG59601301DXD /ha:C8:7F:54:22:50:98 )
May  5 07:05:18 acsd: eth5: selected channel spec: 0x1007 (7)
May  5 07:05:18 acsd: eth5: Adjusted channel spec: 0x1007 (7)
May  5 07:05:18 acsd: eth5: selected channel spec: 0x1007 (7)
May  5 07:05:22 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:23 wan: finish adding multi routes
May  5 07:05:24 BONDING: option disabled
May  5 07:05:24 roamast: ROAMING Start...
May  5 07:05:24 WAN(0) Connection: WAN was restored.
May  5 07:05:25 miniupnpd[2117]: shutting down MiniUPnPd
May  5 07:05:25 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:25 miniupnpd[2382]: HTTP listening on port 45207
May  5 07:05:25 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:25 rc_service: udhcpc_wan 2305:notify_rc stop_samba
May  5 07:05:25 rc_service: udhcpc_wan 2305:notify_rc start_samba
May  5 07:05:25 rc_service: waitting "stop_samba" via udhcpc_wan ...
May  5 07:05:25 miniupnpd[2382]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:25 Samba Server: smb daemon is stopped
May  5 07:05:26 wan_up: Find a 2.5G port on [eth0]
May  5 07:05:26 ntp: start NTP update
May  5 07:05:27 ping_target_with_size: Ping test is complete.
May  5 07:05:27 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3372 seconds.
May  5 07:05:27 GPY211: ### GPY211 WAR 1G : eth0 ###
May  5 07:05:28 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link DOWN.
May  5 07:05:29 ping_target_with_size: Successful to ping target(80.108.102.1) with size(79)
May  5 07:05:29 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3372 seconds.
May  5 07:05:32 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:37 GPY211: ### GPY211 WAR AUTO : eth0 ###
May  5 07:05:38 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link DOWN.
May  5 07:05:40 WAN(0) Connection: WAN(0) link down.
May  5 07:05:42 wlceventd: wlceventd_proc_event(685): eth5: Auth BC:D0:74:2E:73:45, status: Successful (0), rssi:0
May  5 07:05:42 wlceventd: wlceventd_proc_event(722): eth5: Assoc BC:D0:74:2E:73:45, status: Successful (0), rssi:-74
May  5 07:05:43 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 19) Link Up at 1000 mbps full duplex
May  5 07:05:46 WAN(0) Connection: WAN(0) link up.
May  5 07:05:46 rc_service: wanduck 1351:notify_rc restart_wan_if 0
May  5 07:05:47 wan: finish adding multi routes
May  5 07:05:47 miniupnpd[2382]: shutting down MiniUPnPd
May  5 07:05:47 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 07:05:47 miniupnpd[3106]: HTTP listening on port 34793
May  5 07:05:47 kernel: Archer TCP Pure ACK Enabled
May  5 07:05:47 rc_service: udhcpc_wan 3043:notify_rc stop_samba
May  5 07:05:47 rc_service: udhcpc_wan 3043:notify_rc start_samba
May  5 07:05:47 rc_service: waitting "stop_samba" via udhcpc_wan ...
May  5 07:05:47 miniupnpd[3106]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 07:05:47 Samba Server: smb daemon is stopped
May  5 07:05:48 wan_up: Find a 2.5G port on [eth0]
May  5 07:05:49 WAN(0) Connection: WAN was restored.
May  5 07:05:49 ping_target_with_size: Ping test is complete.
May  5 07:05:49 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3349 seconds.
May  5 07:05:51 ping_target_with_size: Successful to ping target(80.108.102.1) with size(79)
May  5 07:05:51 dhcp client: bound 80.108.102.139/255.255.255.0 via 80.108.102.1 for 3349 seconds.
May  5 07:06:14 ntp: start NTP update

This was referenced Aug 31, 2024
Open
Closed
@Rovasteen
Copy link

I have this router but not this issue. Suggestions:

  • Use the Asus firmware recovery tool with some info posted here: https://www.asus.com/us/support/faq/1000814/
  • OR downgrade the router to the initial Asus release and try again to flash Gnuton
  • Make sure you have selected the TUF-AX3000 V2 firmware and also flash from an Ethernet cable (hardwired) connection

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug Something isn't working
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@gnuton @sojusnik @Rovasteen