-
Notifications
You must be signed in to change notification settings - Fork 70
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Ecowitt Wittboy support #107
Comments
@mstefany Strange that I didn't see "gainXX" in my Wittboy. Anyhow I have added 2 PRs: You might want to try out my fork before it is merged: |
Let me test it tonight and report back to you. Thank you for the PRs! |
This might be related too? Unhandled sensor type hrain_piezo value 0.000, file a PR. |
I still get some errors though:
Even with your updated version. |
@mstefany & @warrenchin |
Interested in wittboy support for HA. Current main version is not displaying piezo rain (although set as main source in configuration of wittboy). I have no issues, it seems with UV and light sesnors in current version. These values are shown in HA. |
@ruudvddries not sure I understand you here? do you currently have Wittboy and try the fork or main branch install (HACS is the main branch)? Sounds like the rain sensor on the wittboy doesn't record correctly on the main branch but the UV and solar radiation both work? Give the fork a try with a manual install. maybe that will pull in the rain sensor data you need. |
hey thanks for your effors here! May I ask a question abouth the Wittbot integration? I currently have my sensors integrated via the GW1100 gateway. I also have a Wittboy, is it possible that I can have two devices reporting with this fork? i.e. GW1100 and GW2000? I know you can enable the sensors that the GW1100 has in the GW2000, but I was wondering if I make 2 devices show up in this. thanks |
@Anto79-ops I've never try that but I believe you can, just setup another ecowitt integration on different port. |
Thanks very much. I may try it using a different port, say 4198, but I'd to wait for the release version of the Wittboy support for this integration, only because I'm would not know how to install this fork on HA. Any idea when it will be forked in? |
Hi, yes I have Wittboy connected to the main ecowitt branch from this repo thourgh installation from HACS. Only issue I have is that Piezo data is not dislayed, it stayed at 0.0mm during and after rain. I have set piezo as main source for rain data in the GW2000 settings. Currently Piezo data is shown in my HA installation as unavailable (all piezo related data). As mentioned, all other data from sensors within the WittBoy are reported correctly. I will try to find out how to install the branch version of this repo in HA. regards, Ruud |
I just integrated my Ecowitt Wittboy into HA and am seeing the same issues (no rain sensors, piezo, battery etc within HA). Same error messages in the logs. I'm publishing the data to Weather Underground as well via the EcoWitt gateway and thats working fine (rain sensor). My gateway is running Firmware: GW2000B_V2.1.4 Logger: custom_components.ecowitt
|
Also seeing the same issue with a new Wittboy on version 0.7. Unsure if this is useful, but I'll add it here anyways. Logger: custom_components.ecowitt Unhandled sensor type mrain_piezo value 0.000, file a PR. |
@warrenchin Thanks a lot. Your fork works perfectly. Too bad that it hasn't been merged yet. |
Thank you @warrenchin! Your fork seems to work great for my new Wittboy. Hopefully this gets merged soon. |
I am trying to use Ecowitt Wittboy (GW2001) with Home Assistant, but some sensors (rain) are missing and this shows up in Home Assistant logs:
The text was updated successfully, but these errors were encountered: