d01

PoE splitter board based on WC-PD13C0501I module

PoE splitter board based on WC-PD13C0501I module, There are two options for power input: via RJ45 jack or via 3.5mm screw terminals. The board also provides an RJ45 for Ethernel signal output (without power). There are also, two options for power output: Using the 3.5mm screw terminals or via USB-A female connector. Additionally, there are 12 points for mounting on compatible 10.16 mm pitch backplates.

Schematic

Schematic

Board with components soldered	Bare single PCB	Panelized PCB

Usage example 1

PoE weaterproof camera, equipped with a Raspberry Pi 3 B+ module powered through the network cable, PoE board provides power to the Rpi module, and pass-through of Ethernet signal.

PoE board on backplate at the left	Power and data wires connected	External connections and backplate fixed to enclosure