TP-Link CPE210 v2 fdfcd4a sysupgrade upstream-master (dev-daily) firmware bugs

[everloop2]

https://lists.berlin.freifunk.net/pipermail/berlin/2019-August/039592.html

image 2019.08.19_upstream_master_freifunk-berlin-dev-daily-fdfcd4a-tplink_cpe210-v2-sysupgrade.bin:

-> flash via LuCI working
-> working: freifunk wizard + reboot
-> LuCI -> System -> Administration -> SSH - Access -> Save and Apply -> not working -> unsaved changes -> save and apply -> not working

wifi bugged:
-> wifi is on -> clients can not see AP -> disable: intern-ch13.cottbus.freifunk.net -> same: clients can not see AP
-> wifi -> scan -> shows only: intern-ch13.cottbus.freifunk.net (if activated) or nothing -> there are more wifis around

wifi bug hint: seen somebody mentioned in CPE210 bug threads different irqs

wifi not working: 2019.08.19_upstream_master_freifunk-berlin-dev-daily-fdfcd4a-tplink_cpe210-v2-sysupgrade.bin
[ 14.339957] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.342144] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=12

wifi working: 2019.08.19_freifunk-berlin-development-1cfbb77-cpe210-v2-sysupgrade.bin
[ 10.645916] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.651507] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47

[niccokunzmann]

CPE 210 v3

1. Ich hatte auch, dass das WLAN nicht geht. Nach längerem Warten ohne Strom geht es wieder.
   https://lists.berlin.freifunk.net/pipermail/berlin/2019-September/039760.html
2. Es scheint, als würde sich der Router immer wieder neu starten.
   https://monitor.freifunk-potsdam.de/grafana/d/000000008/node-overview?var-hostname=40-1-raguhner-schleife&refresh=5m&orgId=2
   

Also #722

[everloop2]

closing

wifi has been fixed see: #722 (comment) and #722 (comment)

other quirks needs testing again.