SwitchProUSB.ino

/*
 Example sketch for the Switch Pro USB library - developed by Kristian Sloth Lauszus
 For more information visit the Github repository: github.com/felis/USB_Host_Shield_2.0 or
 send me an e-mail: lauszus@gmail.com
 */

#include <SwitchProUSB.h>

// Satisfy the IDE, which needs to see the include statement in the ino too.
#ifdef dobogusinclude
#include <spi4teensy3.h>
#endif
#include <SPI.h>

USB Usb;
SwitchProUSB SwitchPro(&Usb);

bool printAngle = false;
uint16_t lastMessageCounter = -1;
uint32_t capture_timer;

void setup() {
  Serial.begin(115200);
#if !defined(__MIPSEL__)
  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
#endif
  if (Usb.Init() == -1) {
    Serial.print(F("\r\nOSC did not start"));
    while (1); // Halt
  }
  Serial.print(F("\r\nSwitch Pro USB Library Started"));
}

void loop() {
  Usb.Task();

  if (SwitchPro.connected() && lastMessageCounter != SwitchPro.getMessageCounter()) {
    lastMessageCounter = SwitchPro.getMessageCounter();

    // The joysticks values are uncalibrated
    if (SwitchPro.getAnalogHat(LeftHatX) > 500 || SwitchPro.getAnalogHat(LeftHatX) < -500 ||
        SwitchPro.getAnalogHat(LeftHatY) > 500 || SwitchPro.getAnalogHat(LeftHatY) < -500 ||
        SwitchPro.getAnalogHat(RightHatX) > 500 || SwitchPro.getAnalogHat(RightHatX) < -500 ||
        SwitchPro.getAnalogHat(RightHatY) > 500 || SwitchPro.getAnalogHat(RightHatY) < -500) {
      Serial.print(F("\r\nLeftHatX: "));
      Serial.print(SwitchPro.getAnalogHat(LeftHatX));
      Serial.print(F("\tLeftHatY: "));
      Serial.print(SwitchPro.getAnalogHat(LeftHatY));
      Serial.print(F("\tRightHatX: "));
      Serial.print(SwitchPro.getAnalogHat(RightHatX));
      Serial.print(F("\tRightHatY: "));
      Serial.print(SwitchPro.getAnalogHat(RightHatY));
    }

    if (SwitchPro.getButtonClick(CAPTURE))
      Serial.print(F("\r\nCapture"));
    if (SwitchPro.getButtonClick(HOME)) {
      Serial.print(F("\r\nHome"));
      SwitchPro.setLedHomeToggle();
    }

    if (SwitchPro.getButtonClick(LEFT)) {
      SwitchPro.setLedOff();
      SwitchPro.setLedOn(LED1);
      Serial.print(F("\r\nLeft"));
    }
    if (SwitchPro.getButtonClick(UP)) {
      SwitchPro.setLedOff();
      SwitchPro.setLedOn(LED2);
      Serial.print(F("\r\nUp"));
    }
    if (SwitchPro.getButtonClick(RIGHT)) {
      SwitchPro.setLedOff();
      SwitchPro.setLedOn(LED3);
      Serial.print(F("\r\nRight"));
    }
    if (SwitchPro.getButtonClick(DOWN)) {
      SwitchPro.setLedOff();
      SwitchPro.setLedOn(LED4);
      Serial.print(F("\r\nDown"));
    }

    if (SwitchPro.getButtonClick(PLUS)) {
      printAngle = !printAngle;
      SwitchPro.enableImu(printAngle);
      Serial.print(F("\r\nPlus"));
    }
    if (SwitchPro.getButtonClick(MINUS))
      Serial.print(F("\r\nMinus"));

    if (SwitchPro.getButtonClick(A))
      Serial.print(F("\r\nA"));
    if (SwitchPro.getButtonClick(B)) {
      Serial.print(F("\r\nB"));
      Serial.print(F("\r\nBattery level: "));
      Serial.print(SwitchPro.getBatteryLevel());
      Serial.print(F(", charging: "));
      Serial.print(SwitchPro.isCharging());
    }
    if (SwitchPro.getButtonClick(X))
      Serial.print(F("\r\nX"));
    if (SwitchPro.getButtonClick(Y))
      Serial.print(F("\r\nY"));

    if (SwitchPro.getButtonClick(L)) {
      SwitchPro.setRumbleLeft(false);
      Serial.print(F("\r\nL"));
    }
    if (SwitchPro.getButtonClick(R)) {
      SwitchPro.setRumbleRight(false);
      Serial.print(F("\r\nR"));
    }
    if (SwitchPro.getButtonClick(ZL)) {
      SwitchPro.setRumbleLeft(true);
      Serial.print(F("\r\nZL"));
    }
    if (SwitchPro.getButtonClick(ZR)) {
      SwitchPro.setRumbleRight(true);
      Serial.print(F("\r\nZR"));
    }
    if (SwitchPro.getButtonClick(L3))
      Serial.print(F("\r\nL3"));
    if (SwitchPro.getButtonClick(R3))
      Serial.print(F("\r\nR3"));

    if (printAngle) { // Print angle calculated using the accelerometer only
      Serial.print(F("\r\nPitch: "));
      Serial.print(SwitchPro.getAngle(Pitch));
      Serial.print(F("\tRoll: "));
      Serial.print(SwitchPro.getAngle(Roll));
    }
  }
}