hp-debug.yaml

substitutions:
  name: "hpsejour"
  friendly_name: Climatisation Séjour Debug

esphome:
  name: ${name}
  friendly_name: ${friendly_name}

 
esp8266:
  board: esp01_1m

# mqtt:  
#   broker: homeassistant.local
#   username: heatpumpSejour
#   password: !secret mqtt_password
#   discovery: true
  

# Enable logging
logger:  
  hardware_uart: UART1
  level: DEBUG
  logs:
    CN105Climate: DEBUG    
    sensor: DEBUG
    chkSum : INFO
    WRITE : DEBUG
    READ : DEBUG
    Decoder : DEBUG

# Enable Home Assistant API
api:
  services:
    - service: reboot
      then:
        - logger.log: "Redémarrage en cours..."
        - lambda: |-
            ESP.restart();
    - service: set_remote_temperature
      variables:
        temperature: float
      then:
        - lambda: 'id(clim_seb).set_remote_temperature(temperature);'

    - service: use_internal_temperature
      then:
        - lambda: 'id(clim_seb).set_remote_temperature(0);'
  encryption:
    key: !secret encryption_key

ota:  
- platform: esphome
  password: !secret ota_pwd

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  
  #networks:
  #- ssid : !secret wifi_ssid
  #  password: !secret wifi_password
  #- ssid: !secret wifi_ssid2
  #  password: !secret wifi_password2
  #- ssid: !secret wifi_ssid2
  #  password: !secret wifi_password2

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Heatpump-Sejour Fallback Hotspot"
    password: !secret ota_pwd

captive_portal:
  
#web_server:
#  port: 80
  
time:
  - platform: homeassistant
    id: homeassistant_time

# Chemin vers les fichiers C++ personnalisés
external_components:
 - source:
     type: local
     path: components 


#external_components:
#  - source: github://echavet/MitsubishiCN105ESPHome
#    refresh: 0s                ## to force refresh sources every compile time


        # Text sensors with general information.
text_sensor:
  # Expose ESPHome version as sensor.
#  - platform: version
#    name: ${name} ESPHome Version
  # Expose WiFi information as sensors.
  - platform: wifi_info
    ip_address:
      name: ${name} IP
    ssid:
      name: ${name} SSID
    bssid:
      name: ${name} BSSID

# Sensors with general information.
#sensor:
  # Uptime sensor.
#  - platform: uptime
#    name: ${name} Uptime

  # WiFi Signal sensor.
#  - platform: wifi_signal
#    name: ${name} WiFi Signal
#    update_interval: 60s

uart:
  id: HP_UART
  baud_rate: 2400
  tx_pin: GPIO1
  rx_pin: GPIO3

# Configuration pour l'objet 'climate'
climate:
  - platform: cn105  # remplis avec la plateforme de ton choix
    name: "Clim Seb"
    id: "clim_seb"
    update_interval: 4s
    # Ajoute d'autres paramètres spécifiques à ton matériel et tes besoins
    
# Configuration pour l'objet 'select' pour choisir un baud_rate
select:
  - platform: template 
    name: "Baud Rate Select"
    id: baud_rate_select
    entity_category: DIAGNOSTIC
    #setup_priority : -100.0 ## late
    options:
      #- "400"
      #- "1200"
      - "2400"
      - "4800"
      - "9600"
      #- "19200"
      #- "38400"
      #- "57600"
      #- "115200"
    optimistic: true
    on_value:
      - lambda: |-
          int baud_rate = atoi(x.c_str());
          id(clim_seb).set_baud_rate(baud_rate);

#id(baud_rate_select).publish_state(x);

# extra_components in the code automatically add them
# sensor: 
#   - platform: template
#     name: Operating (Clim)
#     lambda: |-
#       return(id(clim_seb).is_operating());
#   - platform: template
#     name: Compressor Frequency (Clim)
#     lambda: |-
#       return(id(clim_seb).get_compressor_frequency());

# Configuration pour l'objet 'switch' (bouton)
switch:
  - platform: template
    name: "UART Setup Switch"
    id: uart_setup_switch
    entity_category: DIAGNOSTIC
    #setup_priority : -100.0 ## late
    optimistic: true
    turn_on_action:
      - lambda: |-
          // Appelle la méthode 'setupUART' quand le switch est activé
          id(clim_seb).setupUART();
    turn_off_action:
      - lambda: |-
          // Appelle la méthode 'setupUART' quand le switch est activé
          id(clim_seb).disconnectUART();

  - platform: template
    name: "Send 1st packet Switch"
    id: send_packet_switch
    entity_category: DIAGNOSTIC
    #setup_priority : -100.0 ## late
    optimistic: true
    turn_on_action:
      - lambda: |-          
          id(clim_seb).sendFirstConnectionPacket();    
  
  - platform: template
    name: "Send request Info packets"
    id: build_and_send_requests_info_packets
    entity_category: DIAGNOSTIC
    #setup_priority : -100.0 ## late
    optimistic: true    
    turn_on_action:
      - lambda: |-          
          id(clim_seb).buildAndSendRequestsInfoPackets();