Smokeping

Smokeping docker container

What is Smokeping?

SmokePing keeps track of your network latency:

• Best of breed latency visualisation.
• Interactive graph explorer.
• Wide range of latency measurment plugins.
• Master/Slave System for distributed measurement.
• Highly configurable alerting system.
• Live Latency Charts with the most 'interesting' graphs.

How to use this image

When started the smokeping web inteface will listen on port 80 in the container at the '/smokeping/smokeping.cgi' URI.

Hosting a Smokeping instance on port 8000

sudo docker run -it --name smokeping -p 8000:80 -d dperson/smokeping

Configuration

sudo docker run -it --rm dperson/smokeping -h

Usage: smokeping.sh [-opt] [command]
Options (fields in '[]' are optional, '<>' are required):
    -h          This help
    -c "<count>" Configure the default ping count
                possible arg: \"[integer]\" - ping count
    -g "<user;pass>" Configure ssmtp so that email alerts can be sent
                required arg: "<user>" - your gmail username
                required arg: "<pass>" - your gmail password of app password
                These are only set in your docker container
    -e "<email>" Configure email address for owner of smokeping
                required arg: "<email>" - your email address
    -o "<name>" Configure name of the owner of smokeping
                required arg: "<name>" - your name
    -s "<step>" Configure the time step for DB entries
                possible arg: \"[integer]\" - time step in seconds
    -t "<site;name;target>[;alert]" Configure smokeping targets
                required arg: "<site>" - name for site of tests
                required arg: "<name>" - name for check
                required arg: "<target>" - hostname or IP to check
                            Targets can also be http:// or https:// URLs
                possible arg: "[alert]" - send emails on failures (any val)
    -T ""       Configure timezone
                possible arg: "[timezone]" - zoneinfo timezone for container
    -w          Wipe the targets clean

The 'command' (if provided and valid) will be run instead of smokeping

ENVIRONMENT VARIABLES

• SPUSER - If set use named user instead of 'smokeping' (for example root)
• WIPE - If set will wipe all targets
• SSMTP_GMAIL As above configure ssmtp for gmail, set to user;pass
• EMAIL - As above, your email address as the owner [email protected]
• OWNER - As above, your name as the owner Bob Hope
• PING - As above, the number of pings to try
• STEP - As above, the time step for DB entries
• TARGET - As above a target to check, set to site;name;target[;alert]
• TZ - As above, configure the zoneinfo timezone, IE EST5EDT
• USERID - Set the UID for the app user
• GROUPID - Set the GID for the app user
• DEBUG - Run smokeping in debug mode

Examples

Any of the commands can be run at creation with docker run or later with docker exec -it smokeping smokeping.sh (as of version 1.3 of docker).

Setting the Timezone

sudo docker run -it -p 8000:80 -d dperson/smokeping -T EST5EDT

OR using environment variables

sudo docker run -it -p 8000:80 -e TZ=EST5EDT -d dperson/smokeping

Will get you the same settings as

sudo docker run -it --name smokeping -p 8000:80 -d dperson/smokeping
sudo docker exec -it smokeping smokeping.sh -T EST5EDT \
            ls -AlF /etc/localtime
sudo docker restart smokeping

Start smokeping, clear targets, setup a new one to the first hop from ISP:

IP=$(traceroute -n google.com |
            egrep -v ' (10|172\.(1[6-9]|2[0-9]|3[01])|192.168)\.' |
            awk '/[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+.*ms/ {print $2; exit}')
sudo docker run -it -p 8000:80 -d dperson/smokeping -w -t "ISP;NextHop;$IP"

OR

IP=$(traceroute -n google.com |
            egrep -v ' (10|172\.(1[6-9]|2[0-9]|3[01])|192.168)\.' |
            awk '/[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+.*ms/ {print $2; exit}')
sudo docker run -it -p 8000:80 -e WIPE=y -e TARGET="ISP;NextHop;$IP" \
            -d dperson/smokeping

To add additional targets (replace values in <> with your own):

sudo docker exec -it smokeping smokeping.sh -t "<site;name;target>"

IE

sudo docker exec -it smokeping smokeping.sh -t "home;router;bob.dyndns.org"

Start smokeping, and configure sSMTP to forward alerts:

sudo docker run -it -p 8000:80 -d dperson/smokeping \
            -g "sampleuser;samplepass"

OR

sudo docker run -it -p 8000:80 -e SSMTP_GMAIL="sampleuser;samplepass" \
            -d dperson/smokeping

Start smokeping, and configure owners email address:

sudo docker run -it -p 8000:80 -d dperson/smokeping \
            -e "[email protected]"

OR

sudo docker run -it -p 8000:80 -e EMAIL="[email protected]" \
            -d dperson/smokeping

Start smokeping, and configure owners name:

sudo docker run -it -p 8000:80 -d dperson/smokeping -o "Sample User"

OR

sudo docker run -it -p 8000:80 -e OWNER="Sample User" -d dperson/smokeping

Complex configuration

Example configs

If you wish to adapt the default configuration, use something like the following to copy it from a running container:

sudo docker cp smokeping:/etc/smokeping /some/path

You can use the modified configuration with:

sudo docker run -it --name smokeping -p 8000:80 \
            -v /some/path:/etc/smokeping:ro -d dperson/smokeping

User Feedback

Issues

No graphs generated even after >15 minutes

If you are affected by this issue (a small percentage of users are) please try setting the SPUSER environment variable to root, IE:

sudo docker run -it --name smokeping -p 8000:80 -e SPUSER=root -d \
            dperson/smokeping

Reporting

If you have any problems with or questions about this image, please contact me through a GitHub issue.